An epicyclic gear in figure 1 consists of ring gear, planet gear and sun gear. The ring gear has 72 internal teeth and sun gear has 32 external teeth. Planet gear meshes with both ring and sun gears and is carried on an arm which rotates about the Centre of the ring gear at 20 rpm. If the gear A is fixed, Calculate the speed of planet gear.

An epicyclic gear in figure 1 consists of ring gear, planet gear and sun gear. The ring gear has 72 internal teeth and sun gear has 32 external teeth. Planet gear meshes with both ring and sun gears and is carried on an arm which rotates about the Centre of the ring gear at 20 rpm. If the gear A is fixed, Calculate the speed of planet gear.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A gear system comprises gear A, which is stationary. The bar A'C' rotates with an angular velocity ω1 of 5 rad/s. What will be the angular velocity of gear C? Diameters of the gears: DA = 600 mmDB = 350 mmDC = 200 mm Note: Solve gears B and C by IC method and by relative velocities method
For the simple gear train below, Gear A is the input gear and rotates at 2500 rpm and Gear D is the output gear for this simple gear train. The number of teeth for each gear is as follows: NA = 116 Teeth, NB = 178 Teeth, NC = 70 Teeth and ND = 120 Teeth Calculate the output angular velocity at Gear D (ωD). Give your answer in rads-1to the nearest radian.
Original Question: The figure below represents a pair of bevel gears A and B. Gear A rotates in ahorizontal plane about a vertical axis at O. Gear B rotates around the shaft OC,which in turn rotates about the terminal axis at O. At the instant shown, theangular velocity of the shaft OC is 10j rad/sec, and gear A is stationary. Deter-mine the angular velocity of gear B, and the velocity of a point D at the top ofgear B QUESTION THAT NEEDS TO BE ANSWERED: For the bevel gear system shown in problem above, determine the angular accelera-tion of gear B when gear A is stationary and member OC has an angular velocityof 10j rad/sec and and angular acceleration of 25j rad/sec2
Two mating involute spur gears of 20 pressure angle have a gear ratio of 2. The number of teeth on the pinion is 20 and its speed is 250 r.p.m. The module pitch of teeth is 10 mm. If the addendum on each wheel is such that the path of approach and the path of recess on each side are half the maximum possible length cach, find: i) the addendum for pinion and gear wheel, i) the length of arc of contact, iiithe maximum velocity of sliding during approach and recess. Assume pinion to be driver.
An epicyclic gear consists of ring gear, planet gear and sun gear. The ring has 72 internal teeth and sun gear has 32 external teeth . Planet gear meshes with both ring and sun gears and carried an arm which rotates about the centre of the ring gear at 20 r.p.m . If the gear A is fixed. Calculate the speed of planet gear.
The gear train has the following properties: Gear 2: N2 = 14 teeth and Pd = 14Gear 3: d3 = 2.0 in.Gear 4: N4 = 21 teethGear 5: d5 = 4.1 in. and Pd = 11Gear 6: d6 = 2.3 in. and Pd = 10Gear 7: N7 = 29 teeth Calculate the train value.
Please solve in 30 min The teeth number of each gear is already given (e.g. Z₁ =14). If the rotation speed of gear 1 is n₁=380 r/min, calculate the rotation speed of gear carrier H
Hello good Afternoon Sir, Permission, i have a question in my homework. The following bellow is question. Please advice. Thank you Regards,Irfan In planning the combined gears of the Ferguson planetary paradox as shown in the figure below.Sun gear hand input with angular speed (w2) = 0 rpm and hand input with angular speed (w.arm) = 400 rpm counterclockwise (ccw)Where is the number of teeth:Sun gear N2 = 100 (external gear)Sun gear N3 = 99 (external gear)Sun gear N4 = 101 (external gear)Planet gear N5 = 20 (external gear)Calculate the angular velocity, for each gear using the tabulation method. The data is in the image below
The following data relate to two meshing gears: Velocity ratio =1:3;Module: 4mm; Pressure Angle: 20°; Center distance: 200 mm Determine the number of teeth and the base circle radius of the gear wheel.
in the epicyclic gear, annulus gear B has 120 teeth externally and 100 teeth internally. driver A has 20 teeth and the arms E is connected to the driven shaft. The Sun gear D has 60 teeth. If A revolves at 100 r.p.m clockwise and D revolves at 27 r.p.m clockwise. If gear D is fixed and A transmits a torque of 10 N.m at 100 r.p.m clockwise
In a compound epicyclic gear train, has gears A and an annular gears D & E free to rotate on the axis P. B and C is a compound gear rotate about axis Q. Gear A rotates at 75CCW rpm CCW and gear D rotates at 390CW rpm CW. Find the speed and direction of rotation of arm F and gear E. Gears A, B and C are having 16, 45 and 21 teeth respectively. All gears having same module and pitch. Sketch the arrangement and solve by tabular column method.
8.7 A pair of involute gears with 16° pressure angle and 6 mm module is in mesh. The number of teeth on pinion is 16 and its rotational speed is 240 r.p.m. When the gear ratio is just 1.75, find, in order that the interference is just avoided, (a) the addenda on pinion and gear wheel (b) the length of path of contact, and (d) the maximum velocity of sliding of teeth on either side of the pitch point. (DAV Indore, 1989) (Ans. a, 9.6 mm; a 4.2 mm; 35.41 mm; V = 95.58 cm/s) %3D