An inward flow radial turbine shown in the figure below has a nozzle angle, a, of 60" and an inlet rotor tip speed, U, of 2 m/s. The ratio of rotor inlet to outlet diameters is 1.5. The absolute velocity leaving the rotor at section (2) is radial with a magnitude of 12 m/s. The temperature of the fluid is 20 °C. Section (1) V2 = 12 m/s Section (2). (a) Determine the energy transfer per unit mass of fluid flowing through this turbine if the fluid is air. N-m/kg Wair (b) Determine the energy transfer per unit mass of fluid flowing through this turbine if the fluid is water. N-m/kg Wwater

An inward flow radial turbine shown in the figure below has a nozzle angle, a, of 60" and an inlet rotor tip speed, U, of 2 m/s. The ratio of rotor inlet to outlet diameters is 1.5. The absolute velocity leaving the rotor at section (2) is radial with a magnitude of 12 m/s. The temperature of the fluid is 20 °C. Section (1) V2 = 12 m/s Section (2). (a) Determine the energy transfer per unit mass of fluid flowing through this turbine if the fluid is air. N-m/kg Wair (b) Determine the energy transfer per unit mass of fluid flowing through this turbine if the fluid is water. N-m/kg Wwater

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A large lawn sprinkler with two identical arms is used to generate electric power by attaching a generator to its rotating head. Water enters the sprinkler from the base along the axis of rotation at a rate of 5 gal/s and leaves the nozzles in the tangential direction. The sprinkler rotates at a rate of 180 rpm in a horizontal plane. The diameter of each jet is 0.5 in, and the normal distance between the axis of rotation and the center of each nozzle is 2 ft. Determine the maximum possible electrical power produced.
A large lawn sprinkler with two identical arms is used to generate electric power by attaching a generator to its rotating head. Water enters the sprinkler from the base along the axis of rotation at a rate of 5 gal/s and leaves the nozzles in the tangential direction. The sprinkler rotates at a rate of 180 rpm in a horizontal plane. The diameter of each jet is 0.5 in, and the normal distance between the axis of rotation and the center of each nozzle is 2 ft. If the rotating head is somehow stuck, determine the moment acting on the head.
In a certain hydraulic turbomachine, the following data apply:Inlet blade velocity is 20 m/s. Vu1=21 m/s; Vr1=10 m/s.At the exit, V2 is purely axial and has a value of 14 m/s, and blade speed is9 m/s. Is this power absorbing or power producing? Find E and the changes instatic and stagnation pressures. Would this machine be classified as a purelyradial, purely axial, or mixed flow type?Ans: E=420 J/kg; Δpstag=420 kPa; Δpstat=247.4 kPa
A Francis radial-flow hydroturbine has the following dimensions, where location 2 is the inlet and location 1 is the outlet: r2 = 6.60 ft, r1 = 4.40 ft, b2 = 2.60 ft, and b1 = 7.20 ft. The runner blade angles are ?2 = 82° and ?1 = 46° at the turbine inlet and outlet, respectively. The runner rotates at n. = 120 rpm. The volume flow rate at design conditions is 4.70 ×106 gpm. Irreversible losses are neglected in this preliminary analysis. Calculate the angle ?2 through which the wicket gates should turn the flow, where ?2 is measured from the radial direction at the runner inlet. Calculate the swirl angle ?1, where ?1 is measured from the radial direction at the runner outlet. Does this turbine have forward or reverse swirl? Predict the power output (hp) and required net head (ft).
A Francis radial-flow hydroturbine is being designed with the following dimensions: r2 = 2.00 m, r1 = 1.42 m, b2 = 0.731 m, and b1 = 2.20 m. The runner rotates at n. = 180 rpm. The wicket gates turn the flow by angle ?2 = 30° from radial at the runner inlet, and the flow at the runner outlet is at angle ?1 = 10° from radial. The volume flow rate at design conditions is 340 m3 /s, and the gross head provided by the dam is Hgross = 90.0 m. For the preliminary design, irreversible losses are neglected. Calculate the turbine specific speed of the turbine. Provide answers in both dimensionless form and in customary U.S. units. Is it in the normal range for a Francis turbine? If not, what type of turbine would be more appropriate?
A Francis radial-flow hydroturbine is being designed with the following dimensions: r2 = 2.00 m, r1 = 1.42 m, b2 = 0.731 m, and b1 = 2.20 m. The runner rotates at n. = 180 rpm. The wicket gates turn the flow by angle ?2 = 30° from radial at the runner inlet, and the flow at the runner outlet is at angle ?1 = 10° from radial. The volume flow rate at design conditions is 340 m3 /s, and the gross head provided by the dam is Hgross = 90.0 m. For the preliminary design, irreversible losses are neglected. Calculate the inlet and outlet runner blade angles ?2 and ?1, respectively, and predict the power output (MW) and required net head (m). Is the design feasible?
consider the following conditions: a centrifugal pump has diameters d1 = 7 in, d2 = 13 in, blade widths b1 = 4 in, b2 = 3 in, blade angles β1 = 25° and β2 = 40°, and rotates at 1160 r/min. If the fluid is gasoline at 20°C (ρ = 1.319 slugs/ft^3) and the flow enters the blades radially, estimate the theoretical or “design” quantities. (a) design flow rate in gal/min (b) horsepower (c) head in ft
The centrifugal pump in Fig. has r1 = 15 cm,r2 = 25 cm, b1 =b2 = 6 cm, and rotates counterclockwiseat 600 r/min. A sample blade is shown. Assume α1 = 90°.Estimate the theoretical flow rate and head produced, forwater at 20°C, and comment.
PROBLEM 5: In Lake Geneva (Switzerland), there is a water jet (called the Jet d’Eau) that is discharged 130 m straight upward (measured from the surface of the lake). The exit of the discharge pipe is 20 cm in diameter.
The manometric head developed by a three-stage centrifugal pump runningat 450 rpm is 60 m. The width and diameter of each impeller at the outlet are60 mm and 750 mm, respectively, with outlet blade angle 45°. Determine itsmanometric efficiency, if discharge through the pump is 0.3 m^3/s.
A converging elbow turns water through an angle of 135º in a vertical plane. The flow cross-sectional diameter is 400 mm at the elbow inlet, section (1), and 200 mm at the elbow outlet,section (2). The elbow flow passage volume is 0.2 m3between sections (1) and (2). The water volume flowrate is 0.4 m3/s, and the elbow inlet and outlet pressures are 150 kPa(gage) and 90 kPa(gage). The empty elbow mass is 12 kg. Calculate the horizontal and vertical anchoring forces required to hold the elbow in place. Assume: a) Steady, Incompressible, Uniform fluid flow at inlet/ outlet. ρwater= 1000 kg/m3.
A centrifugal pump with 30 cm diameter impeller is rated at 30 lps against a head of 24 m when rotating at 1750 rpm. What would be the rating of a pump of identical geometric shape with a 15 cm diameter impeller? Assume pump efficiencies and rotative speeds are identical.