Consider a 32-bit processor which supports 30 instructions. Each instruction is 32 bit long and has 4 fields namely opcode, two register identifiers and an immediate operand of unsigned integer type. Maximum value of the immediate operand that can be supported by the processor is 8191. How many registers the processor has?

Consider a 32-bit processor which supports 30 instructions. Each instruction is 32 bit long and has 4 fields namely opcode, two register identifiers and an immediate operand of unsigned integer type. Maximum value of the immediate operand that can be supported by the processor is 8191. How many registers the processor has?

Name: Urgent Consider a 32-bit processor which supports 30instructions. Each
Uploaded: 2024-03-20T06:51:23.000Z
Channel: Bartleby
Description: Urgent Consider a 32-bit processor which supports 30instructions. Each instruction is 32 bit long andhas 4 fields namely opcode, two registeridentifiers and an immediate operand ofunsigned integer type. Maximum value of theimmediate operand that can

Systems Architecture

7th Edition

ISBN:9781305080195

Author:Stephen D. Burd

Publisher:Stephen D. Burd

Chapter4: Processor Technology And Architecture

Section: Chapter Questions

Problem 2PE: If a microprocessor has a cycle time of 0.5 nanoseconds, what’s the processor clock rate? If the...

See similar textbooks

Similar questions

Take the multiprocessor with 30 processors, each processor is capable od max2Gflops. What is the maximum capability of the multiprocessor for the execution of anapplication that has 5% sequential code?
Computer Science 1 .Consider the task of doubling all the elements of a 8192 element vector, which might be done on a SISD machine by the following code. Suppose each iteration of the loop requires 20 clock cycles - so the whole process needs 163,840 clocks. for (int i = 0; i < 8192; i ++) x[i] *= 2.0; Now suppose, instead, that the process is done on a pipelined processor having a single pipeline that supports memory to memory vector operations. Assume that each computation (fetch x[i], double it, store result) still takes 20 clock cycles, but that the pipeline, once full, can produce one result each cycle. How many clock cycles total will be needed for this case?
Computer Architecture (Already submit this question, but I think I got wrong solution) Consider a computer that has a number of registers such that the three registers R0 =1500, R1 = 4500, and R2 = 1000 Show the effective address of memory and the registers’ contents in each of the following instructions 1. ADD (R1), R2 2. MOVE 500(R0), R2 3. ADD (40), R1 4. SUBTRACT (5000), R2 5. ADD #30, R2
Follow this steps. Have to Consider two different implementations, M1 and M2, of the same instruction set. There arethree classes of instructions (A, B, and C) in the instruction set. M1 has a clock rate of 2.0GHz and M2has a clock rate of 2.5GHz. The average number of cycles for each instruction class and their frequencies(for a typical program) are as follows:Instruction Class M1-Cycles/InstructionClass M2 -Cycles/InstructionClasss FrequencyA 1 2 60%B 3 2 30%C 4 3 10%(a) Calculate the average CPI for each machine, M1, and M2.(b) Calculate the average MIPS ratings for each machine, M1 and M2.(c) Which machine has a smaller MIPS rating? Which individual instruction class CPI do you needto change, and by how much, to have this machine have the same or better performance as themachine with the higher MIPS rating (you can only change the CPI for one of the instructionclasses on the slower machine)?.
Suppose the implementation of an instruction set architecture uses three classes of instructions, which are called A, B, and C. The total dynamic instruction count is 1 x 10^7 and the processor's clock rate is 2.5 GHz. Details for the three classes are given in the table below: Class CPI % of instructions A 1 20% 50% C 3 30% Complete the following table. Express all answers in scientific notation and round to two decimal places, when needed. Class Instruction Count Number of Clock Cycles х 10^ x 10^ A х 10^ х 10^ x 10^ х 10^ C
Considertwodifferentimplementationsofthesameinstruction set architecture. The instructions can be divided into four classes according to their CPI (class A, B, C, and D). P1 with a clock rate of 2.5 GHz and CPIs of 1, 2, 3, and 3, and P2 with a clock rate of 3 GHz and CPIs of 2, 2, 2, and 2. Given a program with a dynamic instruction count of 1.0E6 instructions divided into classes as follows: 10% class A, 20% class B, 50% class C, and 20% class D, which implementation is faster? a. WhatistheglobalCPIforeachimplementation?
A 32-bit computer has 32 registers, and a memory addressed by bytes with two cycles for reading and writing operations. Consider the instruction ADD, R1, addr. This instruction adds the value stored in R1 to the value stored in the memory address addr, and stores the result in the register R1. a) Show a possible format for this instruction, having into account that the computer has 100 machine instructions and the addresses are represented using 32 bits. b) Indicate the elemental operations and control signals needed to execute the previous instruction.
2. Suppose we have two implementations of the same instruction set architecture.Computer A has a clock cycle time of 250 ps and a CPI of 2.0 for some programand computer B has a clock cycle time of 500 ps and a CPI of 1.2 for the sameprogram. Which computer is faster for this program and by how much?
Please,Consider two different implementations, M1 and M2, of the same instruction set. There arethree classes of instructions (A, B, and C) in the instruction set. M1 has a clock rate of 2.0GHz and M2has a clock rate of 2.5GHz. The average number of cycles for each instruction class and their frequencies(for a typical program) are as follows:Instruction Class M1-Cycles/InstructionClass M2 -Cycles/InstructionClasss FrequencyA 1 2 60%B 3 2 30%C 4 3 10%(a) Calculate the average CPI for each machine, M1, and M2.(b) Calculate the average MIPS ratings for each machine, M1 and M2.(c) Which machine has a smaller MIPS rating? Which individual instruction class CPI do you needto change, and by how much, to have this machine have the same or better performance as themachine with the higher MIPS rating (you can only change the CPI for one of the instructionclasses on the slower machine)?.
Consider a machine with three instruction classes and CPI measurements as follows: Instruction class CPI of the instruction class A 2 B 5 C 7 Suppose that we measured the code for a given program in two different compilers and obtained the following data: Code sequence Instruction counts (in millions) A B C 1 15 5 3 2 25 2 2 Assume that the machine’s clock rate is 500 MHz. Which code sequence will execute faster according to MIPS? How much according to execution time of each code sequence?
Consider two different implementations, M1 and M2, of the same instruction set. There arethree classes of instructions (A, B, and C) in the instruction set. M1 has a clock rate of 2.0GHz and M2has a clock rate of 2.5GHz. The average number of cycles for each instruction class and their frequencies(for a typical program) are as follows:Instruction Class M1-Cycles/InstructionClass M2 -Cycles/InstructionClasss FrequencyA 1 2 60%B 3 2 30%C 4 3 10%(a) Calculate the average CPI for each machine, M1, and M2.(b) Calculate the average MIPS ratings for each machine, M1 and M2.(c) Which machine has a smaller MIPS rating? Which individual instruction class CPI do you needto change, and by how much, to have this machine have the same or better performance as themachine with the higher MIPS rating (you can only change the CPI for one of the instructionclasses on the slower machine)?
Consider two different implementations of the same instruction set architecture.The instructions can be divided into four classes according to their CPI (classA, B, C, and D). P1 with a clock rate of 2.5 GHz and CPIs of 2, 3, 4, and 4, andP2 with a clock rate of 3 GHz and CPIs of 2, 2, 3, and 1. Given a program witha dynamic instruction count of 1.0E6 instructions divided into classes asfollows: 10% class A, 20% class B, 50% class C, and 20% class D, whichimplementation is faster?