Implement a program which multiplies a user input by 10 using only bit shift operations and addition. Check to see if your program is correct by using the mult and mflo operators. Your program should include a proper and useful prompt for input, and print the results in a meaningful manner. 6) Implement a program which multiplies a user input by 15 using only bit shift operations and addition. Check to see if your program is correct by using the mult and mflo operators. Your program should include a proper and useful prompt for input, and print the results in a meaningful manner

write a python code that decodes the coloured bands on a resistor.Each colour band printed on a resistor has a corresponding numeric value, as shown in the table below: Colour Numeric value black 0 brown 1 red 2 orange 3 yellow 4 green 5 blue 6 violet 7 grey 8 white 9 To calculate the total resistance value, the following formula should be used: resistance=(10a+b)⋅10^c where a, b, and c are the numeric values of the first, second, and third colour bands respectively. For example, let's say that the colour bands on a resistor are red-green-orange. In this case, a=2, b=5, and c=3 (using the table). Hence the resistance value is 25000 ohms: resistance=(10*2+5) x 10^3=25000 ohms Your task is to write a program which asks the user to input the three colour bands. The program should then calculate and output the resistance value indicated by the bands. As part of your solution, you must define and use a function named colour_to_number. This function should take…

3. Write a MASM program to determine if a number (0-9) is prime. (A prime number is evenly divisible by only itself and 1). Your program should prompt the user for a number and then display to the screen a message indicating whether the number is prime or not. Assume proper input. Output should be user friendly.

4. Write a Python program to print the calendar of a given month and year. (Hint: Use 'calendar' module) 7. Write a python codes that does the following Step 1: Takes five inputs from the user Step 2: Calculates the average of all the five values Step 3: Adds the first 4 and divides them with the fifth value. Step 4: Rounds the output of Step 2 to the nearest integer. If the output is greater than 0.5 then it should round up otherwise it should round down. Step 5: If the result from the previous step is odd then your program should ask the user to input a new number that could make the resultant even Step 6: If output of Step 4 was even then your program should arrange the first three numbers in an ascending order.   Note: Make sure that you have accounted for a division by zero error.