Match each chemical or item with the proper disposal or cleanup method. Not all disposal and cleanup methods will be labeled damp metal pieces Part B Return to correctly labeled "drying out" beaker. Answer Bank damp metal pieces Part B Place used items in the drawer. calcium chloride solutions Part A Rinse with deionized water, dry as best you can, return to volumetric flask Part A the instructor. volumetric flask Part A metal sheets Part C Return used material to the instructor. damp metal pieces Part B metal sheets Part c calcium chloride solutions Part A Pour down the sink with plenty of running water. volumetric flask Part A Pour into aqueous waste container. damp metal pieces Part B Place used items in garbage.

Match each chemical or item with the proper disposal or cleanup method. Not all disposal and cleanup methods will be labeled damp metal pieces Part B Return to correctly labeled "drying out" beaker. Answer Bank damp metal pieces Part B Place used items in the drawer. calcium chloride solutions Part A Rinse with deionized water, dry as best you can, return to volumetric flask Part A the instructor. volumetric flask Part A metal sheets Part C Return used material to the instructor. damp metal pieces Part B metal sheets Part c calcium chloride solutions Part A Pour down the sink with plenty of running water. volumetric flask Part A Pour into aqueous waste container. damp metal pieces Part B Place used items in garbage.

Chemistry & Chemical Reactivity

9th Edition

ISBN:9781133949640

Author:John C. Kotz, Paul M. Treichel, John Townsend, David Treichel

Publisher:John C. Kotz, Paul M. Treichel, John Townsend, David Treichel

Chapter20: Environmental Chemistry-earth's Environment, Energy, And Sustainability

Section: Chapter Questions

Problem 13PS

See similar textbooks

Similar questions

Substances that poison a catalyst pose a major concern for many engineering designs, including those for catalytic converters. One design option is to add materials that react with potential poisons before they reach the catalyst. Among the commonly encountered catalyst poisons are silicon and phosphorus, which typically form phosphate or silicate ions in the oxidizing environment of an engine. Group 2 elements are added to the catalyst to react with these contaminants before they reach the working portion of the catalytic converter. If estimates show that a catalytic converter will be exposed to 625 g of silicon during its lifetime, what mass of beryllium would need to be included in the design?
In any manufacturing process, reaction monitoring ensures that a chemical reaction proceeds as expected. Table 1 shows the monitoring data for the formation of chlorohexane, collected using a technique called gas chromatography. Note that the concentrations of the chlorohexane solutions are given in millimoles per litre (mmol l–1). The abbreviation mM (millimolar) is frequently used. Plot a graph of the data in Table 1. The graph should be drawn on graph paper or use fine grid if it’s drawn on Excel. Elapsed Time/Hours Concentration of Chlorohexane/mM 0 0 2 40 4 65 6 80 8 90 10 95 12 99
A factory is discharging wastewater containing 200 mg/L BOD into a river. The river has a discharge of 10 m3/s and the wastewater discharge is 2 m3/s. If the upstream of this river has a BOD of 10 mg/L. Please compute BOD after wastewater is completely mixed with river (any BOD degradation is not considered).
Procedure it attached below, but question is in the screenshot. Part A: Solution Preparation Work in pairs. Wear safety goggles and an apron. Connect the temperature probe to Channel 1 of the LabQuest2. The vertical axis has temperature scaled from 0 to 50°C. To set the horizontal axis (time) to 0 to 1000 seconds, go to the menu and change the Duration to 1000 seconds. Wear gloves for this step only, 2.5 M acid can cause burns. When diluting concentrated acid, pour acid into water, slowly with stirring; never the reverse. HAVE A DILUTION PLAN BEFORE COMING TO LAB. (Use the concentration values and volume below in the dilution equation to find the volume of stock solution needed to create the dilute solution.) Using only volumetric glassware, prepare 250.00 mL of approximately 1.0 M HCl solution from the stock HCl solution in the hood (approximately 2.5 M). The exact concentration for the stock solution must be recorded from the bottle’s label and the exact concentration for…
SALICYLIC ACID chemical name chemical formula other common names molecular weight appearance state (solid, liquid, gas) transparency (opaque, transparent, translucent) colour reactivity data (corrosive, flammable, oxidizer, incompatible chemicals, other chemicals it reacts with) fire and explosion data toxicological data storage information preventative measures to be taken when using the chemical first aid procedures (the 2 most common) disposal method the 4 HMIS ratings (health, flammability, physical hazard and personal protective equipment) at the end, you may also add a short section in which you add a few personal comments about the chemical in question
End-of-the-Pipe Control versus Pollution Prevention The marginal cost of reduction curve illustrated in Figure 4.5 assumes a particular approach to reducing pollution, often called end-of-the-pipe control. In other words, when we draw that upward-sloping MC curve, we assume that firms respond to regulation by maintaining the same basic production technology but adding on scrubbers or filters to clean up their emissions. Under these conditions, rising marginal costs of reduction are quite likely. However, suppose that firms radically overhaul their production technology, so that they completely eliminate emissions. This is known as a “pollution prevention” strategy. An example might be a jeweler, who in the face of regulation adopts a closed-loop production system. This is one in which all mineral waste products are recovered from recycled wastewater and then reused. What would the marginal cost of reduction diagram look like in this case? a. Specifically, assume that…
A flask containing photosynthetic green algae and a control flask containing water with no algae are both placed under a bank of lights that is set to cycle between 12 hours of light and 12 hours of dark. The dissolved oxygen concentrations in both flasks are monitored. Predict what the relative dissolved oxygen concentrations will be in the flask with algae compared to the control flask. The dissolved oxygen in the flask with the algae will O always be lower be higher in the light but lower in the dark be higher in the light, but the same in the dark O always be higher
One way to determine the hardness of a water sample is to precipitate the calcium out of solution as a carbonate. The net ionic reaction for this precipitation is: Ca2+(aq) + CO32-(aq) → CaCO3 (s) A 1.00 L sample of water is drawn from a Phoenix, AZ well and 0.534 g of calcium carbonate is recovered using the above reaction. What was the Ca2+ concentration of the original water sample in ppm? Show your work and include units. Hint: ppm stands for parts per million, and in the case of an aqueous solution, this is equivalent to mg/L.
Please put your observations in data table part 2 and answer the post lab questions(1-5) AND 6 A AND B and for number 7 ONLY DO THE EQUATIONS FOR 11 12 AND 13 I MARKED ON THE WORKSHEET BUT ONLY DO EQUATION FOR HCI WITH CUSO4 AGNO3 AND FE2SO4 I KNOW I DID IT BUT I MAY BE WRONG
use ion exchange method in analytical separation to separate mercury and nickel from polluted water using analytical steps and protocols.
In this experiment, your goal is to determine the amount of lead present in a water sample and, if lead is present, to determine whether the level of contamination is potentially dangerous. Preliminary preparation of the sample has resulted in a solid of unknown composition. This solid contains lead (Pb 2+ ) in the form of a water soluble salt and gravimetric analysis will be used to determine the amount of lead present. Step 1. Preparation of precipitating agents : Dissolve a predetermine amount of sodium sulfate in distilled water to produce 100mL with a concentration of 0.175M. Transfer the solution in the burette.Step 2. Obtain 3 10-mL sample of wastewater which contains lead in an erlenmeyer flask.Step 3. Dilute the 10 ml sample with water to 100mL.Step 4. Add an excess amount of sodium sulfate to achieved complete precipitation.Step 5. Filter the solution using a pre-weighed filter paper.Step 6. Collect the precipitates in filter paper and dry in an oven at 105 o C for 3 hrs or…
Which analytical separation method is best for recovering river bodies that are polluted by heavy metals and particulate matter. Explain your analytical process of choice.