Q22. Class A chopper is supplying a DC motor with FWD, motor inductance= 6 H & resistance= 12 Q, input voltage=220 V, chopper frequency = 1kHz and ON time (ton) = 0.5 ms. The back emf of. the motor is 5 V. Using this data, select the correct answer for the following abs questions.
Q: A 200V long-shunt generator delivers 100A, has an armature resistance of 0.05Ω, a series field…
A:
Q: The field and armature resistances of a 231V series motor are 0.1 ohm and 0.2 ohm, respectively. The…
A: Find the efficiency of the motor . If armature and field winding resistance = 0.1 and 0.2 ohm Motor…
Q: 4 4poles,200V,wave connected shunt motor running at 800RPM and drawing armature cur Held current of…
A: In this question we will solve for DC motor output power ,output torque , flux, rotational…
Q: A 3 phase 4 pole star connected induction machine operates from a 230 V (phase voltage) and 50 Hz…
A: Hi! Thank you for the question, As per the honor code, we are allowed to answer three sub-parts at a…
Q: Identify the DC Motor used in Conveyor belt system. With a neat sketch explain its working. List…
A: DC shunt motor is used as the motor for the conveyor belt system because of its constant speed…
Q: Exam -2021 ARall.stio Anser all questions QLA: The following data apply te a 100-AW 250-V sis-pole,…
A: Calculate the load current of the generator. IL=PoutV=100×03 W250 V=400 A
Q: 2. Described The basic principles of methods to start 3-phase induction motors below: A. Star-Delta…
A:
Q: The equivalent circuit parameters of a 230 V, single phase, 6 pole, 60-Hz induction motor are: R1 =…
A: “Since you have posted a question with multiple sub-parts, we will solve the first three sub-parts…
Q: Q3 A short-shunt compound generator supplies a current of 100 A at a voltage of 220 V. The…
A: Tsolution solution is given below
Q: A small electric vehicle is powered by a 96 .1 V battery and uses a series wound motor. It has a…
A: Given Supply voltage V =96.1 V Armature resistance Ra =0.1 ohm Motor speed N =750 rpm Armature…
Q: ANSWER SCHEME 1. Electric drive a) Power source: explains type of source (either regulated or…
A: We are authorized to answer three subparts at a time, since you have not mentioned which part you…
Q: A 18 kW shunt generator having an armature circuit resistance of 0.5 ohm and a field resistance of…
A:
Q: At rated load, the driving engine develops 63 hp of a 230 V shunt generator having armature…
A: From given input power and friction and windage losses calculate developed power and from developed…
Q: single-phase induction motor employed for a mechanical work at a rate of 45 HP. Its electrical power…
A:
Q: A 200V long-shunt generator delivers 100A, has an armature resistance of 0.05Ω, a series field…
A:
Q: Explain the construction of AC serve motor, also draw its diagram.
A: Construction AC servo engines are fundamentally two-stage squirrel confine acceptance engines and…
Q: 3. A long-shunt compound generator delivers a load current of 50 A at 500 V and has armature, series…
A:
Q: A 500-kW, 60-Hz, 2300-V, six-pole alternator A is paralleled with a 300-kW, 60-Hz, 2300-V, four-pole…
A:
Q: Compare the reaction of DC motor and DC generator. Aslo explain rule by which DC generator/motor…
A: rule by which DC generator/motor works Basically, all the machines work on faradays law of…
Q: A 220v shunt generator has an armature resistance of 0.02 ohm and a shunt resistance of 44 ohms. At…
A: A DC machine is classified in two types. DC motors DC generators Above question is based on DC…
Q: Q2: Find the value of starting capacitance for a 250W, 120V, 50HZ single-phase motor that will place…
A:
Q: The reduced parameters of a 3-phase asynchronous motor with star connected stator, 50 Hz and 1450…
A: The reduced parameters of a 3-phase asynchronous motor have a star connected stator frequency, f=50…
Q: A separately excited DC motor with supply voltage of 420 V, armature resistance of 0.5 N and K_ =1.8…
A: Given data A separately excited DC motor is controlled by a regenerative braking using a DC chopper.…
Q: 4.(dc motor) A 6-pole, simplex wound armature having 720 conductors, rotates in the field of…
A:
Q: QI) The induced voltage of a shunt generator is 254 V. When the machine is loaded, the terminal…
A: Step 1 Induced voltage E = 254 V Terminal voltage Vt = 240 V Armature resistance Ra = 0.04Ω…
Q: Find the slip, the powers converted,air gap, output and efficiency of a motorthree-phase induction…
A:
Q: Q2// Answer the following questions. 1- The power rotor input of 3-phase, 60 Hz, 4-pole induction…
A: In this question 3 phase induction motor is given and some losses is given....We have to find out…
Q: C. A three-phase, 60 Hz, six-pole star-connected induction motor is supplied by a constant supply,…
A: 1) Range of load torque between starting torque and Maximum torque.Ist=23132+j4Ist=30∠-63.435° ASo,…
Q: Three-phase asynchronous motor with a nominal value of 20 kW, 6 poles. It has a voltage value of 420…
A: In this question we need to find a total copper losses and the shaft torque of the given induction…
Q: Select the DC generator used for arc welding. With an elegant drawing explaining its operation.
A: “Since you have posted a question with multiple sub-parts, we will solve the first three sub-parts…
Q: 40% Part B: If the load Speed-Torque characteristics (including the mechanical losses) is described…
A: According to guidelines we need to solve only the first three subparts. According to the question we…
Q: For an ideal Belt Drive system, in which D1 is the diameter of the driving pulley and D2 is that of…
A: The mechanical load is attached to the driven pulley. Hence the rotational speed of the mechanical…
Q: 1- The below given nameplate a) How can it be run in a network of 50 Hz? b) Will there be any…
A: Fig: Given name plate (a) It is given that supply frequency is 50 Hz at…
Q: Answe completely and elaborate complete details. No plagiarism 1.) Define the working principle of…
A: AC motor: The motor converts the electrical current into mechanical power. This type of motor is…
Q: Parameters transferred to the stator of a 6-pole, 3-phase, 7.5 kW, 60 Hz, 2% slip ASM operating in a…
A: An AC motor is a electrical machine which takes AC electrical input energy and produces mechanical…
Q: Electrical Engineering Problem. Please help to provide correct solution for the problem. Please show…
A: In this question we have given dc shunt generator...We have to find load at which generator have…
Q: A 36 MVA, 21 kV, 1800 r/min, 3-phase generator connected to a power grid has a synchronous reactance…
A:
Q: The field and armature resistances of a 243V series motor are 0.3 ohm and 0.1 ohm, respectively. The…
A:
Q: Q2)A train is driven by a DC machine with independent electrical excitation. At a speed of 1500 rpm,…
A: We have given the following problem
Q: Q3\ A short-shunt compound generator supplies a current of 100 A at a voltage of 220 V. The…
A:
Q: 13. A synchronous machine is run as an unloaded motor. If a low voltage is supplied at the rated…
A: Under no load condition, synchronous machine will only draw a small current to mainly compensate…
Q: A 25 kW Shunt Generator generates terminal voltage 400V at full load and has resistances of field…
A: Given a shunt generator having, Po/p=25kWVT=400VRsh=200ΩRa=1.75ΩFriction & windage loss=600W
Q: Q22. Class A chopper is supplying a DC motor with FWD, motor inductance- 6 H & resistance= 12 2,…
A: Given: L=6H, R=12 ohm Vs=220 V F=1 KHZ ton=0.5ms
Q: Estimate the stator core dimensions, number of stator slots and number of stator conductors per slot…
A:
Q: 24. NEMA-rated general-purpose motors can operate on voltages 610% of their rated nameplate voltage.…
A: Consider the voltage between the phases AB is, EAB=465 VThe voltage between the phases BC is,EBC=487…
Q: A Vconnected, 400 V, four-pole, 50 Hz induction machine has the following parameters Xs=1.32, Xr=12,…
A: A 3 phase induction motor has all parameters. Find the input power, power factor and output power…
Q: 1. Identify the DC motor that can be used in conveyor. Also, explain the requirement of a DC Motor…
A: The detailed answer is solved below according to the given parameters and instructions in the…
Q: 12. A long-shunt, compound generator delivers a load current of 50 A at 500 V and the resistances of…
A: From the long shunt compound generator
Q: shunt generator with a capacity of 250 kW and a voltage of 250 V has an armature circuit resistance…
A: Given, A shunt generator has, Terminal voltage (Vt)= 250 V Output power (Pout) = 250 kW Armerture…
Step by step
Solved in 2 steps with 2 images
- Your assumption is that you measure Insulation Resistance [IR] using MeggerTest on an Induction Motor that works on a line voltage of 440 Volts 50 Hz with a measurable test result of 0.5 M Ohm. Question : a. What about your conclusion, is the measurement value still in accordance with the provisions of the Class Recommendation?. b. What are your actions to be able to maintain and maintain the best IR value of electric motors ?| 40% | Part B: If the load Speed-Torque characteristics (including the mechanical | Tasses) is described by following equation: TL= [11.1+(§/150) Nrl, as shown in Fig 1. | Determine the speed control range(masimum range) for three of the following ases: | a- Reducing the stator voltage using autotransformer. b- Inserting extemal rotor resistance. [ | Reducing the input voltage by 35%. | | o Reducingteiopus voiage st V=085 Vea) What applications / experiments are necessary to find the Rc parameter in the equivalent circuit given in Figure 1? b) Write the value of the Ir 'current given in Figure 1 with a sentence in the idle running test of the 3-phase Asynchronous motor.
- DEGREE: BS ELECTRICAL ENGINEERING COURSE: AC MACHINES Note: Please solve in this way. Given>Missing>Illustration>Solution>FinalAnswer. Please include symbols, units, formulas, step by step solution, please don't cut the solution. Thank you! #10 A 4-pole,3-phase, y-connected induction motor has 48 stator slots 8 series conductors per slot and coil pitch of 83.3 percent. (A) Determine the pitch and distribution factors. [Answer: 0.966 and 0.958] (B) Determine the maximum flux per'pole when connected to a' 220-volt,60-cycle line, neglecting local resistance and reactance drops. [Answer: 805,000 maxwells]A 220 V shunt generator develops a brake horsepower of 64 HP. If the armature and shunt resistances 0.02 and 55 ohms respectively and the iron and friction losses amount to 1750 W, find the full-load current.A 6-phase ∆-connected 1600 V (line-to-line), 150 kW, 50 Hz, six-pole induction driveis used in an electric car. The drive has the following parameter values in Ω/phasereferred to the stator:R1 =0.334 Ω R2 =0.168 Ω Rm1 = 125 ΩX1 = 0.273 Ω X2 = 0.287 Ω Xm1 = 16.78 ΩThe total friction, windage, and core losses may be assumed to be constant at Prot =773 W, independent of load. For a slip value of s=0.015: b ) Compute the speed, output torque, power and stator current d) Calculate the efficiency when the motor is operated at rated voltage andfrequency. answer:b) n= 985 rpm; Torque T= 1.18 x104 Nm; Power= 1.22 x106 W; Stator current I = 175.72 /32.79° (d) Efficiency = 86.4%
- DEGREE: BS ELECTRICAL ENGINEERING COURSE: AC MACHINES Note: Please solve in this way. Given>Missing>Illustration>Solution>FinalAnswer. Please include symbols, units, formulas, step by step solution, please don't cut the solution. Thank you! #09 A three-phase, y-connected induction motor has a total of 300 effective turns on its stator Determine the maximum value of the flux built up per pole when it is connected to a 220-volt, 60 cycle supply. [Ans.476,800 maxwells]A 13 kW, 198 V DC short-shunt motor, being fed through a feeder with total resistance of 0.04 ohms, has an armature, series field and shunt field resistances of 0.01 ohm, 0.02 ohm and 44 ohms, respectively. Find the armature voltage. 2 decimal places only Please hand written solutionDEGREE: BS ELECTRICAL ENGINEERING COURSE: AC MACHINES Note: Please solve in this way. Given>Missing>Illustration>Solution>FinalAnswer. Please include symbols, units, formulas, step by step solution, please don't cut the solution. Thank you! (#1011) A 4-pole,3-phase, y-connected induction motor has 48 stator slots 8 series conductors per slot and coil pitch of 83.3 percent. [For C Only] The rotor of has 36 slots with 4 series conductors per slot. The' winding is Y-connected with a pítch of 77.7%. (A) Determine the pitch and distribution factors. [Answer: 0.966 and 0.958] (B) Determine the maximum flux per'pole when connected to a' 220-volt,60-cycle line, neglecting local resistance and reactance drops. [Answer: 805,000 maxwells] (C) Determine the ratio of transformation of the motor [Answer: 2.74]
- DEGREE: BS ELECTRICAL ENGINEERING COURSE: AC MACHINES Note: Please solve in this way. Given>Missing>Illustration>Solution>FinalAnswer. Please include symbols, units, formulas, step by step solution, please don't cut the solution. Thank you! (#15) A three-phase 6-pole; 60-cycle, 230-volt wound rotor induction motor has its stator connected in delta and its rotor in wye. There are 75 percent as many rotor conductors as stator conductors. Calculate the voltage and frequency between slip rings if normal voltage is applied to the stator when (A) the rotor is at rest, and (B) the rotor slip is 0.04. [Answer: 298.7V; 60 Hz; 11.95V; 2.4 Hz]A motor,the input to which is 20kW at 220V,is supplied by a two-core cable.400m long.If the power lost in the cable Is not to exceed 5% of the motor Input . Calculate the minimum permissible C.S.Area of the cable conductor What will be the voltage at the feeding point ? Assume the resistivity of the conductor at working temperature to be 0.02 microohm/mDEGREE: BS ELECTRICAL ENGINEERING COURSE: AC MACHINES Note: Please solve in this way. Given>Missing>Illustration>Solution>FinalAnswer. Please include symbols, units, formulas, step by step solution, please don't cut the solution. Thank you! (#16) A three-phase, 4-pole, 60-cycle, 110-volt wound rotor induction motor has its stator connected in wye and its rotor in delta. The stator and rotor windings have the same number of conductors. The rotor resistance and reactance at standstill are 0.18 ohm and 0.75 ohm respectively. If normal voltage is applied on the stator, calculate the rotor current at (A) starting, (B) when rotor speed is 1,720 rpm. [ Answer: 82.34A;15.42 A. ]