Template Assisted Crystallization (TAC) is a a commercial softening alternative. Which of the following description is wrong O A. TAC involves the adsorption of cations and anions O B. TAC involves the crystallization of hardness ions O C. TAC involves the detachment of nanocrystalls back to the treated water O D. TAC has a greater removal efficiency for hardness than RO or ion exchange

Template Assisted Crystallization (TAC) is a a commercial softening alternative. Which of the following description is wrong O A. TAC involves the adsorption of cations and anions O B. TAC involves the crystallization of hardness ions O C. TAC involves the detachment of nanocrystalls back to the treated water O D. TAC has a greater removal efficiency for hardness than RO or ion exchange

Principles of Instrumental Analysis

7th Edition

ISBN:9781305577213

Author:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Publisher:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Chapter15: Molecular Luminescence Spectrometry

Section: Chapter Questions

Problem 15.12QAP: Equations for the chemiluminescence determination of SO2 are given on page 383. Derive an expression...

See similar textbooks

Similar questions

Condisering the following schematic representation, def,ne the mechanism involved in Cu-Ni diffusion and major parameters that affect this process?
Microstructure of a steel contain 100% coarse pearlite it carbon content is reported to be 0.65% is it possible? And why ?
A sample of feldspar weighing 1.500g is decomposed, and eventually there is obtained a mixture of KCl and NaCl weighing 0.1801 g. These chlorides are dissolved in H2O, a 50-mL pipetful of 0.08333 N AGNO3 is added, and the precipitate is filtered off. The filtrate requires 16.47 mL of 0.1000N KCNS, with ferric alum as indicator. Calculate the percentage of K2O in the silicate.
(d) By using the data provided below, calculate the PillingBedworth ratio for the nickel (Ni) – nickel oxide (NiO) system and determine whether NiO is protective against corrosion. Atomic mass of nickel = 58.7 g.mol-1 Density of nickel = 8.91 Mg.m-3 Molecular mass of nickel oxide = 74.7 g.mol-1 Density of nickel oxide = 6.67 Mg.m-3 (e) A stainless steel pressure vessel that has fracture toughness, K1C, of 197 MN.m-3/2 is going to be exposed to a stress of 398 MN.m-2 . By using this information explain how designers can determine the thickness of the vessel so that catastrophic failure can be avoided.
The %purity of a powdered crude sample of Na2CO3 containing only inert impurities is to be determined by reacting 225.0 mg of the crude sample to 10.0 mL of 3.00 M HCl solution, and bubbling the resulting CO2(g) product in water that is at exactly 29 °C. After the reaction has completed, the level of the liquid inside the eudiometer rests 4.30 cm above the water level in the beaker. The graduation on the eudiometer indicates that the trapped gas is 44.37 mL. The experiment was done under a barometric pressure of 755.2 torr. a. How many moles of CO2 were collected? b. What is the percent purity of the sample? Round off to the nearest whole number
The %purity of a powdered crude sample of Na2CO3 containing only inert impurities is to be determined by reacting 225.0 mg of the crude sample to 10.0 mL of 3.00 M HCl solution, and bubbling the resulting CO2(g) product in water that is at exactly 29 °C. After the reaction has completed, the level of the liquid inside the eudiometer rests 4.30 cm above the water level in the beaker. The graduation on the eudiometer indicates that the trapped gas is 44.37 mL. The experiment was done under a barometric pressure of 755.2 torr. What CASE does this experiment satisfy?
kindly answer this problem and follow this format GIVEN REQUIRED SOLUTION and write regibly thank you so much For the adsorption of a substance A from aqueous solution by charcoal at25oC the freundlich constants are n=3.0 and k=0.50 for y in grams per gramand C in grams per liter. What weight of a W is adsorbed by 2 g of charcoalfrom 1 L of a solution containing originally 2 g of the substance?
JJ Techie calcined some ceramic powders at 1600℃ for 12 hrs, when removed from thefurnace, JJ was upset to find a big hard lump., After grinding up to the lump, someone told JJ to add a sintering aid and deflocculant to the ceramic before trying to press it into cylinders 10 inch by 0.25 inch in diameter. How could JJ do this well? JJ needs this size ceramic rod for experiments.
For PM Removal using Activated Carbon (AC), is the mechanism only limited to adsorption? Or does it also have other mechanisms (i.e. filtration)?
A sample of iron ore weighing 800 mg was treated with HNO3 , boiled to dryness and redissolved in dilute HCl. After filtration and removal of undissolved silica, the liquid was passed through a Walden reductor. The collected sample was titrated with 0.0210 M KMnO4 , requiring 12.0 mL to reach the end point. Calc %Fe (55.845) in the ore.
A chemist received different mixtures for analysis with the statement that they contained NaOH, NaHCO3, Na2CO3, or compatible mixtures of these substances, together with inert material. From the data given, identify the respective materials, and calculate the percentage of each component. 1.000g samples and 0.2500N HCl were used in all cases. (A) For Sample W: With PP, 24.32ml was used. A duplicate sample required 48.64ml with MO. (B). For Sample X: The addition of PP caused no color change. With MO, 38.47ml of the acid was required. (C). For Sample Y: To cause a color change in the cold with PP, 15.29ml of the acid was necessary, and an additional 33.19ml was required for complete neutralization. (D) For Sample Z: The sample was titrated with acid until the pink of PP disappeared; this process required 39.96ml. On adding an excess of the acid, boiling, and titrating back with alkali, it was found that the alkali was exactly equivalent to the excess acid added.
When plotted according to the linear form of the BET equation, data for the adsorption of N2 on Graphon at 77 K give an intercept of 0.005 and a slope of 1.5 (both in cm3 STP per gram). Calculate Asp assuming a molecular area of 16 (angstrom)2 for N2. Calculate also the heat of adsorption for the first layer (the heat of condensation for N2 is 1.3 kcal/mol). Would your answer for Vm be much different if the intercept were taken to be zero (and the slope the same)? Comment briefly on the practical significance of your calculation.