The phase voltage at the terminals of a balanced three-phase Yconnected load is 2400 V. The load has an impedance of 16 + j12 Ω/ϕ and is fed from a line having an impedance of 0.10 + j0.80 Ω/ϕ. The Yconnected source at the sending end of the line has a phase sequence of acb and an internal impedance of 0.02 + j0.16 Ω/ϕ. Use the a-phase voltage at the load as the reference and calculate (a) the line currents IaA, IbB, and IcC; (b) the line voltages at the source, Vab, Vbc, and Vca; and (c) the internal phase-to-neutral voltages at the source, Va ′n, Vb′n, and Vc′n.

The phase voltage at the terminals of a balanced three-phase Yconnected load is 2400 V. The load has an impedance of 16 + j12 Ω/ϕ and is fed from a line having an impedance of 0.10 + j0.80 Ω/ϕ. The Yconnected source at the sending end of the line has a phase sequence of acb and an internal impedance of 0.02 + j0.16 Ω/ϕ. Use the a-phase voltage at the load as the reference and calculate (a) the line currents IaA, IbB, and IcC; (b) the line voltages at the source, Vab, Vbc, and Vca; and (c) the internal phase-to-neutral voltages at the source, Va ′n, Vb′n, and Vc′n.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.43P: A three-phase line, which has an impedance of (2+j4) per phase, feeds two balanced three-phase loads...

See similar textbooks

Similar questions

Two balanced three-phase loads that are connected in parallel are fed by a three-phase line having a series impedance of (0.4j2.7) per phase. One of the loads absorbs 560 kVA at 0.707 power factor lagging, and the other 132 kW at unity power factor. The line-to-line voltage at the load end of the line is 2203V. Compute (a) the line-to-line voltage at the source end of the line. (b) the total real and reactive power losses in the three-phase line, and (c) the total three-phase real and reactive power supplied at the sending end of the line. Check that the total three-phase complex power delivered by the source equals the total three-phase comp lex power absorbed by the line and loads.
A three-phase line, which has an impedance of (2+j4) per phase, feeds two balanced three-phase loads that are connected in parallel. One of the loads is Y-connected with an impedance of (30+j40) per phase, and the other is -connected with an impedance of (60j45) per phase. The line is energized at the sending end from a 60-Hz, three-phase, balanced voltage source of 1203V (rms. line-to-line). Determine (a) the current, real power. and reactive power delivered by the sending-end source: (b) the line-to-line voltage at the load: (C) the current per phase in each load: and (d) the total three-phase real and reactive powers absorbed by each load and by the line. Check that the total three- phase complex power delivered by the source equals the total three-phase power absorbed by the line and loads.
Two three-phase generators supply a three-phase load through separate three-phase lines. The load absorbs 30 kW at 0.8 power factor lagging. The line impedance is (1.4+j1.6) per phase between generator G1 and the load, and (0.8+j1) per phase between generator G2 and the load. If generator G1 supplies 15 kW at 0.8 poir factor lagging, with a terminal voltage of 460 V line-to-line, determine (a) the voltage at the load terminals. (b) the voltage at the terminals of generator G2, and (c) the real and reactive power supplied by generator G2. Assume balanced operation.
3. A balanced delta connected load of "14+J18" ohm - per phase is connected at the end of a three-phase line. The line impedance is "7+J12" ohm - per phase. The line is supplied from a three-phase source with a line-to-line voltage of 207.85 Vrms. Taking phase "a" voltage Va as reference, determine the following: (a) Current in phase a. (b) Total complex power supplied from the source. (c) Magnitude of the line-to-line voltage at the load terminal.
3. A balanced delta connected load of "17+j18 - per phase is connected at the end of a three-phase line. The line impedance is 7+j9 - per phase. The line is supplied from a three-phase source with a line-to-line voltage of 207.85 Vrms. Taking phase "a" voltage Va as reference, determine the following: (a) Current in phase a. (b) Total complex power supplied from the source. (c) Magnitude of the line-to-line voltage at the load terminal.
1) A short three-phase transmission line has a per-phase series impedance of 0.53∠55.20Ω. The line supplies the three-phase load at the receiving end of 825 kW at 0.8 power factor lagging. If the line-to-line sending end voltage is 3.4 kV, using short line model determine: (a) the receiving-end line-to-line voltage in kV and determine percent voltage drop across the line; (b) the line current; (c) the sending-end power factor
1) A short three-phase transmission line has a per-phase series impedance of 0 . 53 ∠ 55 . 20 Ω. The line supplies the three-phase load at the receiving end of 825 kW at 0.8 power factor lagging. If the line-to-line sending end voltage is 3.4 kV, using short line model determine: (a) the receiving-end line-to-line voltage in kV and determine percent voltage drop across the line; (b) the line current; (c) the sending-end power factor
1. A 3-phase line having an impedance of (5 + j 20) ohms per phase delivers a load of 30 MW at a p.f. of0·8 lagging and voltage 33 kV. Determine the capacity of the synchronous condenser required to beinstalled at the receiving end if voltage at the sending end is to be maintained at 33 kV. solution is [42·78 MVAR]
A three-phase transmission line has an impedance of 2 + j8 Ω per phase. The linesupplies the following two three-phase loads:Load 1: 600 KVA at 0.8 power factor lagging.Load 2: 300 KVA at 0.9 power factor lagging.The phase voltage at the loads is Vr = 2000∟0◦ volts.Determine:a) The phase voltage at the sending end (Vs).b) Three-phase real and reactive power losses in the transmission line.c) Three-phase real and reactive power supplied at the sending end.
17) In a balanced three-phase Y-Y system, the source is an abc sequence of voltages and Vab = 476∠3° Vrms. The line impedance per phase is 0.7 + j1.3Ω , while the per-phase impedance of the load is 13 + j13Ω . Calculate the magnitude of the phase-c line current (in Arms).
A three phase transmission line is 270 km long. The series impedance of the line is (0.835+ j0.974) Ω/km and the susceptance is (j4.37x e(-6)) S/km. The voltage at the sending end is 400 kV. (a)Find the sending end current and receiving end voltage when there is no load on the line. (b)Suppose a medium transmission line and determine the maximum permissible line length if the receiving end at no-voltage is not to exceed 375 kV.
1. A 69-kV, three-phase short transmission line is 16 km long. The line has a per phase series impedance of 0.125+j0.4375 Ω per km. Determine the sending end voltage, voltage regulation, the sending end power, and the transmission efficiency when the line delivers (a) 70 MVA, 0.8 lagging power factor at 64 kV. (b) 120 MW, unity power factor at 64 kV. Use lineperf program to verify your results. 2. A three-phase, 765-kV, 60-Hz transposed line is composed of four ACSR, l,431,000-cmil, 45/7 Bobolink conductors per phase with flat horizontal spacing of 14 m. The conductors have a diameter of 3.625 cm and a GMR of 1.439 cm. The bundle spacing is 45 cm. The line is 400 km long, and for the purpose of this problem, a lossless line is assumed. (a) Determine the transmission line surge impedance Zc, phase constant ß, Wavelength, the surge impedance loading SIL, and the ABCD constant. b) The line delivers 2000 MVA at 0.8 lagging power factor at 735 kV. Determine the sending end quantities and…