The rod BD is made of material with G1= 137 GPa has a diameter 42 mm is bonded to the tube CA at point B, the tube made of material with G2=D233 GPa has an outer diameter 89 mm and wall thickness of 8 mm. If T1=659 N.m and T2=1186 N.m, answer the following questions:

The rod BD is made of material with G1= 137 GPa has a diameter 42 mm is bonded to the tube CA at point B, the tube made of material with G2=D233 GPa has an outer diameter 89 mm and wall thickness of 8 mm. If T1=659 N.m and T2=1186 N.m, answer the following questions:

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter11: Columns

Section: Chapter Questions

Problem 11.5.14P: A steel post /t if with a hollow circular cross section is fixed at the base and free at the top...

See similar textbooks

Related questions

Q: A steel bar with length of 4.5 m is subjected to forces as shown in the figure: 1. Determine the…

Q: The rod BD is made of material with G1= 110 GPa has a diameter 18 mm is bonded to the tube CA at…

Q: The rod BD is made of material with G1= 124 GPa has a diameter 34 mm is bonded to the tube CA at…

A: Given: Rod BD: G1=124 GPad=34 mm Tube CA: G2=211 GPaD0=73 mmt=10 mmT1=-579 N.m (counter clockwise…

Q: Q4 The L2 steel bolt as shown in Figure Q4 has a diameter of 5 mm, and the link AB which is made…

Q: A steel [E = 200 GPa] rod with a circular cross section is 14-m long. Determine the minimum diameter…

A: Given:E=200 GPaL=14 mP=37 KN∆L=5 mm

Q: Two members AB and AC are made of material with E= 91 Gpa and each member has cross sectional area…

A: Given: E=91 GPaP=2079 NL1=202 mm =0.202 mL2=313 mm=0.313 mL3=480 mm=0.48 m

Q: The rigid bar ABC and EFG are supported by pins at A and G. The vertical rods are made of steel (rod…

A: Given: The temperature change, Δt = 50o The coefficient of thermal expansion, α = 0.0000117/oC The…

Q: A rod is made of cast iron and is secured to the piston by a tapered rod and nut and to the…

A: Given Cylinder diameter, D = 1.3 m Pressure, P = 0.25 N/mm2…

Q: The bar ABC is supported by a pin at A and a steel wire at B. Determine the magnitudeof force…

Q: QI/ A circular steel bar of various cross-section is subjected to a pill of 750 kN as shown in Fig…

Q: Two rods are connected to each other and are restrained at top and bottom. The top portion is steel…

Q: The steel bars AC and BC, each of cross-sectional area 120 mm^2, are joined at C with a pin.…

Q: Q1. A compound bar consists of a circular rod of steel of 25 mm diameter rigidly fixéd Into a copper…

A: The given area of the circular rod is given below.

Q: 1.1 A rod made up of a number of circular cross-sections as shown in Fig. 1.67 is subjected to a…

A: 1.1 Given Data Load acting on the rod is: P=125 kN=125000 N Modulus of elasticity is: E=205…

Q: The rod ABCD is made of an aluminum for which E= 70 GPa. Take P= 90 kN. NOTE: This is a multi-part…

A: Given:E=70 GPaP=90 kN

Q: A steel [E = 200 GPa] rod with a circular cross section is 13-m long. Determine the minimum diameter…

Q: The L2 steel bolt as shown in Figure 4 has a diameter of 5 mm, and the link AB which is made from…

Q: A uniform bar 1 is connected to a tapered rod 2. Both are subjected to axial loads as shown. If P =…

Q: A column with circular cross section of 30 mm diameter has its both ends fixed and is subjected to…

A: Solution:

Q: Q15. The rigid bar is supported by steel rods (E - 200,000 MPa) (AB, CD and EF) and hinge as shown…

Q: The plug has a diameter of 30 mm and fits within a rigid sleeve having an inner diameter of 32 mm.…

A: Given Data Length of plug and sleeve, L=50mm The diameter of the plug, d=30mm The inner diameter of…

Q: À solid aluminum [E = 70 GPa; a - 225 x 10C) rod (1) is connected to a solid bronze (E - 100 GPa; a-…

A: Given data as per question diameter of aluminium rod =42 mm Diameter of bronze rod 128 mm…

Q: The rod BD is made of material with G1= 137 GPa has a diameter 42 mm is bonded to the tube CA at…

Q: The rod BD is made of materia with G1= 124 GPa has a diameter 34 mm is bonded to the tube CA at…

A: The above question is based on Torsion of shafts.

Q: Beam ABD supports an 80 kg vertical mass connected at point D. The beam has a pin connection at the…

Q: 9. The rigid bar AB is supported by two rods made of the same material. The bar is initially…

Q: 1. Consider a deformable homogenous siender rod of constant area along its length. It is axially…

A: According to st. Venant's theory, maximum normal strain in actual case crosses maximum normal strain…

Q: A steel [E = 200 GPa] rod with a circular cross section is 9-m long. Determine the minimum diameter…

Q: 4. A steel bar of 40 mm × 40 mm square cross-section is subjected to an axial compressive load of…

A: Given data , Bar of square shape having area - 40*40 mm2 So Area A = 1600mm2 Where comprehensive…

Q: A copper bar consists from three sections: sections 1 is of 25 mm diameter and 60 mm long, section 2…

A: Calculate the cross-section area of section 1. A1=πd124 Here, d1 is the diameter of section 1, and…

Q: 2. A composite rod of overall length of 200 mm comprised of a steel rod and brass rod attached…

Q: A square steel bar is 50 mm on a side and 250 mm long. It is loaded by an axial tensile force of 200…

A: GIVEN DATA- SIDE OF SQUARE a=50mm L=250mm E=200GPa P=200KN POISSON RATIO=0.3 WE HAVE TO FIND…

Q: The rod BD is made of material with G1= 135 GPa has a diameter 16 mm is bonded to the tube CA at…

Q: A load P is supported by a structure consisting of rigid bar ABC, two identical solid aluminum alloy…

Q: The cylindrical rod is made of steel with E = 30000 ksi and u = 0.3. P 10 kips d Id = lin. L=4 ft AL…

A: Option c is correct. Here negative sign shows that final diameter is lesser than initial diameter.

Q: The stress-strain diagram for a bar of steel alloy is shown. Determine: a) The modulus of Elasticity…

A: Note:-As per our company guidelines, we are supposed to answer only the first three sub-parts.…

Q: The prismatic bar has a cross-sectional area A = 3 in² and is made of material with modulus of…

A: Given: The cross-sectional area of bar is A=3 in2. The modulus of elasticity is E=28×106 psi. The…

Q: The utility pole supports the transformer that has a weight of 3 kN and the center of gravity at G.…

Q: 3. The aluminum and bronze cylinders are centered and secured between two rigid end-plates by…

Q: QN 44 A C-frame subjected to a force of 15 kN is shown in Figure. It is made of grey cast iron FG…

A: Force = 15 kN FOS = 2.5 Sut = 300 N/mm2 As per guideline , I can only do 1 question at a time. So ,…

Q: The rod BD is made of materia with G1= 124 GPa has a diameter 34 mm is bonded to the tube CA at…

Q: Due to a fabrication error, the inner circle of the tube is eccentric with respect to the outer…

A: The expression for the average stress of the outer circle is,…

Q: The rod BD is made of material with G1= 135 GPa has a diameter 16 mm is bonded to the tube CA at…

Q: A straight bar 450 mm long is 10 mm in diameter for the first 200 mm length and 20 mm in diameter…

A: Given data: L=450 mmd1=10 mmL1=200 mmd2=20 mmF=10 kNE=2×105 N/mm2 Need to determine the decrease in…

Q: Consider a deformable homogenous slender rod of constant area along its length. It is axially loaded…

Q: The rod BD is made of material with G1= 135 GPa has a diameter 16 mm is bonded to the tube CA at…

A: Given data Diameter of rod BD = 16 mm Outer diameter of rod CA = 37 mm Thickness (t) = 7 mm

Q: Determine the outside diameter of a hollow steel rod that will carry a tensile load of 55,000 kg at…

A: Giventensile load P=55000kgstress σ=1500kg/cm2thickness t=10mm=1cm

Concept explainers

Power Transmission Elements

It is defined as the energy transfer from one location to another location. The energy will start moving from the energy generation source to the energy applied position to obtain the work output. From this method, a large amount of electric energy moves from the power station to various electrical substations.

Question

أمير يعقوب کاظم
الآن
Q1
The rod BD is made of material with G1= 137 GPa
has a diameter 42 mm is bonded to the tube CA
at point B, the tube made of material with G2=D233
GPa has an outer diameter 89 mm and wall
thickness of 8 mm. If T1=659 N.m and T2=1186
N.m, answer the following questions:
B T2 N-m
0.4 m
0.1 m
0.3 m
TI N-m
The polar moment of inertia of the
rod BD is
Your answer
•..
المزيد
تعديل
II

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Design of Power Transmission Elements and Power Transmission Systems

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The rod BD is made of material with G1= 124 GPa has a diameter 34 mm is bonded to the tube CA at point B, the tube made of material with G2=211 GPa has an outer diameter 73 mm and wall thickness of 10 mm. If T1=579 N.m and T2=1042 N.m, answer the following questions: The maximum shear stress of the rod BD is The maximum shear stress of the tube CA is The maximum shear stress of the assembly is The angle of twist between D and B is The angle of twist between C and A is The angle of twist at D is Your answer The angle of twist between C and B is Your answer The reaction at point A is
Why is is that when I compute for the diameter, the answer is 7.9706? How was 13.22 obtained? Bartleby link for solution: https://www.bartleby.com/questions-and-answers/a-steel-rod-is-stretched-between-two-rigid-walls-and-carries-a-tensile-load-of-5000-n-at-20c.-if-the/5c99ed3b-d083-41be-a905-b15aa3bc8648
The rectangular bar is connected to the support bracket with a 17-mm-diameter pin. The bar width is w = 70 mm and the bar thickness is 15 mm. Each side of the bracket has the same dimensions as the bar. The average shear stress in the pin cannot exceed 115 MPa, the bearing stress in the bar cannot exceed 140 MPa, and the bearing stress in the bracket cannot exceed 150 MPa. Determine the maximum value of Pmax that can be supported by the structure.
A bar made of A-36 steel has the dimensions shown below. If an axial force of P = 65 kN is applied to the bar. Use E = 200 GPa for A-36 steel. Determine the change in its length: ______ µm.
The member consists of the steel rod AB that is screwed into the end of the bronze rod Find the largest value of P that meets the following design criteria: (a) the overall length of the member is not to change by more than 3 mm; and (b) the stresses are not to exceed 140 MPa in steel and 120 MPa in bronze. The moduli of elasticity are 200 GPa for steel and 80 GPa for bronze.
Determine the safe wall thickness of a 50 inches steel tank with internal pressure of 8 Mpa. The ultimate stress is 296 Mpa. The factor of safety to use is 3. A. 2 in B. 3 in C. 5 in D. 4 in
BD rod made of G1 = 78 GPa with a diameter of 27 mm attached to the CA tube at point B, the tube made of G2 = 133 GPa had an outer diameter of 59 mm and a wall thickness of 10 mm. If T1 = 935 Nm and T2 = 1683 Nm, answer the following questions: 1- It is the polar inertial moment of the bar BD. 2- Maximum shear stress BD. 3- It is the polar moment of inertia of the CA tube. 4- It is the maximum shear stress BD. 5- It is the maximum shear stress of the CA tube. 6- It is the maximum shear stress of the assembly. 7- is the torsion angle between D and B. 8- It is the torsion angle between C and A. -9 is the torsion angle at D. 10- is the torsion angle between C and B. 11- is the reaction at point A.
A flange coupling connects two shafts in order to transmit 250 kW at 100 rpm. It uses 6 bolts with a diameter of 20 mm located at a 210 mm bolt circle diameter. Determine the flange thickness if the bearing stress on the flange is 95 MPa. A. 10 mm B. 20 mm C. 25 mm D. 30 mm
Two fork-end pieces are to be joined together by a single steel pin of 25 mm diameter and they arerequired to transmit 50 kN. Determine the minimum cross-sectional area of material required in one branch of eitherfork if the stress in the fork material is not to exceed 180 MN/m2. What will be the maximum shear stress in the pin?1.39 x 10 m*; 50.9 MN/m*]
Determine the outer diameter (mm) of a tubular rod subjected to an axial force of 53 kN if it developed a stress of 52 MPa. Take note that the inner diameter is 2/6 of the outer diameter. Hiiii i am having a hard time. It is kinda urgent tysm i appreciate u sm
The d = 17-mm-diameter solid rod passes through a D = 22-mm-diameter hole in the support plate. When a load P is applied to the rod, the rod head rests on the support plate. The support plate has a thickness of b = 10 mm. The rod head has a diameter of a = 34 mm, and the head has a thickness of t = 8 mm. The shear stress in the rod head cannot exceed 145 MPa, the punching shear stress in the support plate cannot exceed 100 MPa, and the bearing stress between the rod head and the support plate cannot exceed 145 MPa. Determine the maximum value of Pmax that can be supported by the structure.
1) A cylindrical pressure vessel is fabricated from steel plating that has a thickness of 20 mm. The diameter of the pressure vessel is 450 mm, and it's length is 2.0 m. Determine the maximum internal pressure that can be applied if the longitudinal stress is limited to 140 MPa and the circumferential stress is limited to 60 MPa 2) A compound thin cylinder has a common diameter of 100 mm, and the inner cylinder has a thickness of 2,5 mm. The radial pressure between the two cylinders is 200 KPa and the difference between the two common diameters before shrinkage was 0,004305 mm. E=200 GPa Determine : A) Thickness of the outer cylinder B) Resultant hoop stresses in both cylinders if the compound cylinder is subjected to an internal pressure of 180 KPa