Which of the satements below is/are limitations of Dumas Method? i. The Ideal condition is just an assumption for the vapor of the volatile sample ii. The sample must be a volatile liquid with a boiling point above 25°C and below 100°C using similar method iii. Possibility of having Impurities that can contribute to discrepancies of the result O All are Method's limitation O only ii and iii are the limitations O only i and ii are teh limitation O only i is the limitation

Which of the satements below is/are limitations of Dumas Method? i. The Ideal condition is just an assumption for the vapor of the volatile sample ii. The sample must be a volatile liquid with a boiling point above 25°C and below 100°C using similar method iii. Possibility of having Impurities that can contribute to discrepancies of the result O All are Method's limitation O only ii and iii are the limitations O only i and ii are teh limitation O only i is the limitation

Principles of Instrumental Analysis

7th Edition

ISBN:9781305577213

Author:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Publisher:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Chapter33: Automated Methods Of Analysis

Section: Chapter Questions

Problem 33.8QAP

See similar textbooks

Similar questions

A solution of common salt in water is prepared by adding 50kg of salt to 200kg of water tomake a liquid density of 1250kg/m3. Calculate the concentration of salt in this solution as a: i) Weight(w/w)fraction (Ans: weight fraction 20%)
A binary mixture with components A and B is to be separated in a distillation column to obtain 95 mol%. A as the top product. The binary mixture has a con stant relative volatility AB = 2. The column feed is a a - saturated liquid containing 50 mol % of A. Under the usual simplifying assumptions such as constant molal overflow, negligible heat loss, ideal trays, the mini mum reflux ratio for this separation is (rounded off to one decimal place)
The aqueous solution of acetic with a flow rate of 1000 kg/hr contains 30% acetic acid by mass and will be extracted in a countercurrent multistage process with pure isopropyl ether (IPE) to reduce the acetic acid concentration in the final raffinate phase (LN) to 2% by mass. a) Calculate the minimum solvent flow. b) Determine the theoretical number of steps required when using a solvent of 1.5 minimum solvent flow rate. c) Determine the number of theoretical steps using the McCabe-Thiele method. Chart. Acetic acid (A)-Water (B)-isopropyl ether (IPE) (C) LIQUID-Liquid Balances at 1 atm pressure and 293 K Water layer (%) Water (B) Isopropyl ether layer (%) Water (B) 0.6 Acetic acid (A) IPE (C) Acetic acid (A) IPE (C) 98.8 1.2 99.4 99.3 98.9 0.69 98.1 1.2 0.18 0.5 1.41 97.1 1.5 0.37 0.7 2.89 95.5 1.6 0.79 98.4 91.7 1.9 1.0 97.1 6.42 13.30 25.50 36.70 1.9 93.3 4.82 11.40 2.3 84.4 71.1 3.4 3.9 84.7 71.5 21.60 31.10 58.9 4.4 6.9 58.1 48.7 10.6 10.8 45.1 37.1 44.30 46.40 16.5 36.20 15.1…
a.) A 12 kmol liquid mixture with XSi = 0.8, xca = 0.2 at 1500oC was cooled to 1030oC. Determine the amount of liquid and pure solid Si that are in equilibrium with each other. b.) Suppose the mixture in (a) is cooled further to 900oC. how many kg of CaSi2 is formed? (Molar weights: Ca – 40 g/mol, Si – 28 g/mol) c.)At xSi = 0.694 and T = 1030oC, is the system solid, liquid, or both?
(a) Water in vadose zone contains chlorobenzene of concentration 40 mg/L. What is the equilibrium concentration soil air in contact with this solution? (b) An aquifer with porosity 0.3 has distribution coefficient of TCE as 100 L/kg. What fraction of TCE is in aqueous phase and sorbed phase of the soil?
1. Sodium carbonate is recovered as decahydrate from 1000kg of 5% solution of sodium carbonate in water. If it is desired that 95% of Na2CO3 is to be recovered as decahydrate by cooling to 278 K, determine the following: a) the mass of water evaporated (b) the mass of crystals obtained (Na2CO3 ∙ 10H2O). The solubility of Na2CO3 in water at 278K is 9.0% (weight) 2. A copra batch contains 44% oil and is to be extracted with n-hexane. The extracted meal contains 0.07 kg of oil/kg oil free matter and the mass fraction of n-hexane in it is 0.05. The extract contains 49% n- hexane. If 10,000 kg of copra are to be processed, how many kg of n-hexane are required and the determine the amount of extract. 3. Absorption of sulphur dioxide is carried out in a packed tower. Gas containing 14.8% sulphur dioxide and the rest inert gases enters the tower while the leaving gases contains 1% sulphur dioxide. Water flows at the rate of 1m3/min. The tower handles 7380 m3/hr of gas at 303K and 1 bar. Find…
Polycarbonate, PC, is used for aircraft canopies. A batch of this polymer was found to fail prematurely when impacted by a 4 pound bird during qualification studies. You suspect that the problem is due to a molecular weight difference for this particular batch of polymer compared to previous batches. You decide to perform dilute solution viscosity studies to determine the Mol.wt. Assume density is 1.2g/cm3 What solvent would you use? Justify your answer Please answer very soon will give rating surely
hree components in a mixture have varying distribution constants between the mobile phase and the stationary phass One of the components has a very low distribution constant, Would this component likely elute first or last and how would you design an experiment or modify the components of the separation to make it perform in the opposite manner?
A 0.064 kg of octane vapor (MW = 114) is mixed with 0.91 kg of air ( MW = 29 ) in the manifold is 86.1 kPa, and the temperature is 290 K. Assume octane behaves ideally, what is the total volume of this mixture. Show unit analysis and conversion on solution. Round off to four decimal places.
Determine the following from the Txy diagram of a two-component (A and B) solid-liquid system: Composition of the eutectic mixture Consider a mixture with overall B composition of 0.57. What is the ratio of the amount of solid containing 0.67 B and 0.33 A to the amount of the eutectic mixture at the eutectic temperature? What is the chemical formula of the solid represented by the vertical phase boundary passing through point g? (Hint: use mole fractions of A and B to answer this)
The student wants to study the phytochemical components of areca nuts (Areca catechu L.). They retrievedthe ethyl acetate fraction from the ethanol extract. Based on literature, the following are the phytochemicalcomponents of areca nuts:Using a schematic diagram, propose a method to separate the components in the ethyl acetate fraction byliquid-liquid extraction.
a. What is the chemical formula of the solid represented by the vertical phase boundary passing through point g? (Hint: use mole fractions of A and B) b. Suppose we have a solid mixture represented by point k. How much of the solid in letter a is in equilibrium per kg of pure B? Given the Txy diagram below of a two-component (A and B) solid-liquid system.