THERMODYNAMICS (LL)-W/ACCESS >IP<
THERMODYNAMICS (LL)-W/ACCESS >IP<
9th Edition
ISBN: 9781260666557
Author: CENGEL
Publisher: MCG CUSTOM
bartleby

Videos

Textbook Question
Book Icon
Chapter 14.7, Problem 81P

Repeat Prob. 14–79 for a total pressure of 88 kPa for air.

(a)

Expert Solution
Check Mark
To determine

The rate of heat transfer.

Answer to Problem 81P

The rate of heat transfer is 451.7kJ/min.

Explanation of Solution

Express initial partial pressure.

Pν1=ϕ1Pg1=ϕ1Psat@32°C (I)

Here, relative humidity at state 1 is ϕ1, initial vapor pressure is Pg1 and saturation pressure at temperature of 32°C is Psat@32°C.

Express the dew point temperature of the incoming air.

Tdp=Tsat@Pν1 (II)

Here, initial specific humidity is ϕ1.

Express initial partial pressure.

Pa1=P1Pν1 (III)

Here, initial pressure is P1.

Express initial specific volume.

v1=RaT1Pa1 (IV)

Here, universal gas constant of air is Ra and initial temperature is T1.

Express initial specific humidity.

ω1=0.622Pν1P1Pν1 (V)

Express initial enthalpy.

h1=cpT1+ω1hg1 (VI)

Here, initial specific enthalpy at saturated vapor is hg1, specific heat at constant pressure of air is cp and temperature at state 1 is T1.

Express final partial pressure.

Pν2=ϕ2Pg2=ϕ2Psat@20°C (VII)

Here, relative humidity at state 2 is ϕ2, final vapor pressure is Pg2 and saturation pressure at temperature of 20°C is Psat@20°C.

Express final partial pressure.

Pa2=P2Pν2 (VIII)

Here, final pressure is P2.

Express final specific volume.

v2=RaT2Pa2 (IX)

Here, final temperature is T2.

Express final specific humidity.

ω2=0.622Pν2P2Pν2 (X)

Express final enthalpy.

h2=cpT2+ω2hg2 (XI)

Here, final specific enthalpy at saturated vapor is hg2, specific heat at constant pressure of air is cp and temperature at state 2 is T2.

Express initial volume rate of air.

ν˙1=V1A1=V1[πD24] (XII)

Here, initial volume and area is V1andA1 respectively, and diameter is D.

Express the mass flow rate of air at inlet.

m˙a1=ν˙1v1 (XIII)

Here, initial specific volume is v1.

As the process is a steady flow and thus the mass flow rate of dry air remains constant during the entire process.

m˙a1=m˙a2=m˙a

Here, mass flow rate of dry air at exit is m˙a2 and mass flow rate of dry air is m˙a.

Express water mass balance to the combined cooling to obtain the mass flow rate of water.

m˙w,i=m˙w,em˙a1ω1=m˙a2ω2+m˙wm˙w=m˙a1(ω1ω2) (XIV)

Here, mass flow rate of water at inlet and exit is m˙w,iandm˙w,e respectively, specific humidity at state 1 and 2 is ω1andω2 respectively and mass flow rate of water is m˙w.

Express the cooling rate when the condensate leaves the system by applying an energy balance on the humidifying section.

E˙inE˙out=ΔE˙systemE˙inE˙out=0E˙in=E˙outm˙ihi=Q˙out+m˙ehe

Q˙out=m˙a1h1(m˙a2h2+m˙whw)=m˙a1(h1h2)m˙whw (XV)

Here, rate of heat rejected or cooling rate when the condensate leaves the system is Q˙out, the rate of total energy entering the system is E˙in, the rate of total energy leaving the system is E˙out, the rate of change in the total energy of the system is ΔE˙system, initial and exit mass flow rate is m˙iandm˙e respectively, enthalpy at inlet and exit is hiandhe respectively, enthalpy at state 1 and 2 is h1andh2 respectively, and enthalpy of water is hw.

Conclusion:

Refer Table A-4, “saturated water-temperature table”, and write saturation pressure at temperature of 32°C using an interpolation method.

Write the formula of interpolation method of two variables.

y2=(x2x1)(y3y1)(x3x1)+y1 (XVI)

Here, the variables denote by x and y is temperature and saturation pressure respectively.

Show the saturation pressure corresponding to temperature as in Table (1).

Temperature

T(°C)

Saturation pressure

Psat(kPa)

30 (x1)4.2469 (y1)
32 (x2)(y2=?)
35 (x3)5.6291 (y3)

Substitute 30°C,32°Cand35°C for x1,x2,andx3 respectively, 4.2469kPa for y1 and 5.6291kPa for y3 in Equation (XVI).

y2=(32°C30°C)(5.6291kPa4.2469kPa)(35°C30°C)+4.2469kPa=4.76kPa=Psat@32°C

Thus, the saturation pressure at temperature of 32°C is,

Psat@32°C=4.76kPa

Substitute 0.7 for ϕ1 and 4.76kPa for Psat@32°C in Equation (I).

Pν1=(0.7)(4.76kPa)=3.332kPa

Substitute 3.332kPa for Pν1 in Equation (II).

Tdp=Tsat@3.332kPa (XVII)

Here, saturation temperature at pressure of 3.332kPa is Tsat@3.332kPa.

Refer Table A-5, “saturated water-pressure table”, and write saturation temperature at pressure of 3.332kPa using an interpolation method.

Show the saturation temperature corresponding to pressure as in Table (2).

Pressure

P(kPa)

Saturation temperature

Tsat(°C)

3 (x1)24.08 (y1)
3.332 (x2)(y2=?)
4 (x3)28.96 (y3)

Use excels and tabulates the values from Table (2) in Equation (XVI) to get,

Tsat@3.332kPa=25.8°C

Substitute 25.8°C for Tsat@3.332kPa in Equation (XVII).

Tdp=25.8°C

Substitute 88kPa for P1 and 3.332kPa for Pν1 in Equation (III).

Pa1=88kPa3.332kPa=84.67kPa

Refer Table A-2, “ideal-gas specific heats of various common gases”, and write the gas constant and specific heat at constant pressure of air.

Ra=0.287kPam3/kgcp=1.005kJ/kg°C

Substitute 0.287kPam3/kg for Ra, 32°C for T1 and 84.67kPa for Pa1 in Equation (IV).

v1=(0.287kPam3/kg)(32°C)84.67kPa=(0.287kPam3/kg)[(32+273)K]84.67kPa=(0.287kPam3/kg)(305K)84.67kPa=1.034m3/kgdryair

Substitute 88kPa for P1 and 3.332kPa for Pν1 in Equation (V).

ω1=0.622(3.332kPa)85kPa3.332kPa=0.02448kgH2O/kgdryair

Refer Table A-4, “saturated water-temperature table”, and write the specific enthalpy saturated vapor at temperature of 32°C using an interpolation method.

Show the specific enthalpy saturated vapor corresponding to temperature as in Table (3).

Temperature

T(°C)

specific enthalpy

saturated vapor

hg1(kJ/kg)

30 (x1)2555.6 (y1)
32 (x2)(y2=?)
35 (x3)2564.6 (y3)

Use excels and tabulates the values from Table (3) in Equation (XVI) to get,

hg1@32°C=hg1=2559.2kJ/kg

Substitute 1.005kJ/kg°C for cp, 32°C for T1, 0.02448 for ω1 and 2559.2kJ/kg for hg1 in Equation (VI).

h1=(1.005kJ/kg°C)(32°C)+(0.02448)(2559.2kJ/kg)=94.80kJ/kgdryair

Refer Table A-4, “saturated water-temperature table”, and write saturation pressure at temperature of 20°C.

Psat@20°C=2.339kPa

Substitute 1 for ϕ2 and 2.339kPa for Psat@20°C in Equation (VII).

Pν2=(1)(2.339kPa)=2.339kPa

Substitute 88kPa for P2 and 2.339kPa for Pν2 in Equation (VIII).

Pa2=88kPa2.339kPa=85.661kPa

Substitute 0.287kPam3/kg for Ra, 20°C for T2 and 85.661kPa for Pa2 in Equation (IX).

v2=(0.287kPam3/kg)(20°C)85.661kPa=(0.287kPam3/kg)[(20+273)K]85.661kPa=(0.287kPam3/kg)(293K)85.661kPa=0.9817m3/kgdryair

Substitute 88kPa for P2 and 2.339kPa for Pν1 in Equation (X).

ω2=0.622(2.339kPa)85kPa2.339kPa=0.01699kgH2O/kgdryair

Refer Table A-4, “saturated water-temperature table”, and write the specific enthalpy saturated vapor at temperature of 20°C.

hg2@20°C=hg2=2537.4kJ/kg

Substitute 1.005kJ/kg°C for cp, 20°C for T2, 0.01699 for ω2 and 2537.4kJ/kg for hg2 in Equation (XI).

h2=(1.005kJ/kg°C)(20°C)+(0.01699)(2537.4kJ/kg)=63.20kJ/kgdryair

Refer Table A-4, “saturated water-temperature table”, and write the enthalpy of water at temperature of 20°C.

hw=hf@20°C=83.915kJ/kg

Here, specific enthalpy saturation liquid at temperature of 20°C is hf@20°C.

Perform unit conversion of diameter from cmtom.

D=40cm=40cm[m100cm]=0.4m

Substitute 120m/min for V1 and 0.4m for D in Equation (XII).

ν˙1=(120m/min)[π(0.4m)24]=15.08m3/min

Substitute 15.08m3/min for ν˙1 and 1.034m3/kgdryair for ν1 in Equation (XIII).

m˙a1=15.08m3/min1.034m3/kgdryair=14.59kg/min

Substitute 14.59kg/min for m˙a1, 0.02448kgH2O/kgdryair for ω1 and 0.01699kgH2O/kgdryair for ω2 in Equation (XIV).

m˙w=(14.59kg/min)(0.024480.01699)=0.1093kg/min

Substitute 14.59kg/min for m˙a1, 94.80kJ/kgdryair for h1, 63.20kJ/kgdryair for h2, 0.1093kg/min for m˙w and 83.915kJ/kg for hw in Equation (XV).

Q˙out=[(16.87kg/min)[(94.8063.20)kJ/kgdryair](0.1093kg/min)(83.915kJ/kg)]=451.7kJ/min

Hence, the rate of heat transfer is 451.7kJ/min.

(b)

Expert Solution
Check Mark
To determine

The mass flow rate of the water.

Answer to Problem 81P

The mass flow rate of the water is 18.01kg/min.

Explanation of Solution

Express the mass flow rate of the water.

m˙coolingwater=Q˙wcpΔT (XVIII)

Here, mass flow rate of the water is Q˙w, specific heat at constant pressure of water is cp and rise in temperature is ΔT.

Conclusion:

Refer Table A-2, “ideal-gas specific heats of various common gases”, and write specific heat at constant pressure of water.

cp=4.18kJ/kg°C

Substitute 451.7kJ/min for Q˙w, 4.18kJ/kg°C for cp and 6°C for ΔT in Equation (XVIII).

m˙coolingwater=451.7kJ/min(4.18kJ/kg°C)(6°C)=18.01kg/min

Hence, the mass flow rate of the water is 18.01kg/min.

c)

Expert Solution
Check Mark
To determine

The exit velocity of the airstream.

Answer to Problem 81P

The exit velocity of the airstream is 113.9m/min.

Explanation of Solution

Express the exit velocity of the airstream.

V2=ν2ν1V1 (XIX)

Conclusion:

Substitute 1.034m3/kgdryair for ν1, 0.9817m3/kgdryair for ν2 and 120m/min for V1 in Equation (XIX).

V2=0.9817m3/kgdryair1.034m3/kgdryair(120m/min)=113.9m/min

Hence, the exit velocity of the airstream is 113.9m/min.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
In your own words, answer the following questions: 1. What is the dew-point temperature? 2. How does the air motion in the vicinity of the human body affect human comfort? 3. What is the difference between dry air and atmospheric air? 4. Describe the difference between mass fraction and mole fraction
the total enthalpy of 18 kg of steam at 9000 kpa is 42 409.224 kj . Determine the dryness fraction of the steam ? .
Determine the mass and enthalpy of 0.15 m3 of wet steam at a pressure of 4 bar and dryness fraction 0.8

Chapter 14 Solutions

THERMODYNAMICS (LL)-W/ACCESS >IP<

Ch. 14.7 - Is it possible to obtain saturated air from...Ch. 14.7 - Why are the chilled water lines always wrapped...Ch. 14.7 - How would you compare the enthalpy of water vapor...Ch. 14.7 - A tank contains 15 kg of dry air and 0.17 kg of...Ch. 14.7 - Prob. 15PCh. 14.7 - An 8-m3 tank contains saturated air at 30C, 105...Ch. 14.7 - Determine the masses of dry air and the water...Ch. 14.7 - A room contains air at 85F and 13.5 psia at a...Ch. 14.7 - Prob. 19PCh. 14.7 - Prob. 20PCh. 14.7 - Prob. 21PCh. 14.7 - In summer, the outer surface of a glass filled...Ch. 14.7 - In some climates, cleaning the ice off the...Ch. 14.7 - Andy and Wendy both wear glasses. On a cold winter...Ch. 14.7 - Prob. 25PCh. 14.7 - Prob. 26PCh. 14.7 - Prob. 27PCh. 14.7 - A thirsty woman opens the refrigerator and picks...Ch. 14.7 - The air in a room has a dry-bulb temperature of...Ch. 14.7 - Prob. 31PCh. 14.7 - Prob. 32PCh. 14.7 - Prob. 33PCh. 14.7 - How do constant-enthalpy and...Ch. 14.7 - At what states on the psychrometric chart are the...Ch. 14.7 - How is the dew-point temperature at a specified...Ch. 14.7 - Can the enthalpy values determined from a...Ch. 14.7 - Atmospheric air at a pressure of 1 atm and...Ch. 14.7 - Prob. 39PCh. 14.7 - Prob. 40PCh. 14.7 - Prob. 41PCh. 14.7 - Atmospheric air at a pressure of 1 atm and...Ch. 14.7 - Reconsider Prob. 1443. Determine the adiabatic...Ch. 14.7 - What does a modern air-conditioning system do...Ch. 14.7 - How does the human body respond to (a) hot...Ch. 14.7 - How does the air motion in the vicinity of the...Ch. 14.7 - Consider a tennis match in cold weather where both...Ch. 14.7 - Prob. 49PCh. 14.7 - Prob. 50PCh. 14.7 - Prob. 51PCh. 14.7 - Prob. 52PCh. 14.7 - What is metabolism? What is the range of metabolic...Ch. 14.7 - Why is the metabolic rate of women, in general,...Ch. 14.7 - What is sensible heat? How is the sensible heat...Ch. 14.7 - Prob. 56PCh. 14.7 - Prob. 57PCh. 14.7 - Prob. 58PCh. 14.7 - Prob. 59PCh. 14.7 - Repeat Prob. 1459 for an infiltration rate of 1.8...Ch. 14.7 - An average (1.82 kg or 4.0 lbm) chicken has a...Ch. 14.7 - An average person produces 0.25 kg of moisture...Ch. 14.7 - How do relative and specific humidities change...Ch. 14.7 - Prob. 64PCh. 14.7 - Humid air at 150 kPa, 40C, and 70 percent relative...Ch. 14.7 - Humid air at 40 psia, 50F, and 90 percent relative...Ch. 14.7 - Prob. 67PCh. 14.7 - Air enters a 30-cm-diameter cooling section at 1...Ch. 14.7 - Prob. 69PCh. 14.7 - Prob. 70PCh. 14.7 - Why is heated air sometimes humidified?Ch. 14.7 - Air at 1 atm, 15C, and 60 percent relative...Ch. 14.7 - Air at 14.7 psia, 35F, and 50 percent relative...Ch. 14.7 - An air-conditioning system operates at a total...Ch. 14.7 - Prob. 75PCh. 14.7 - Why is cooled air sometimes reheated in summer...Ch. 14.7 - Atmospheric air at 1 atm, 30C, and 80 percent...Ch. 14.7 - Ten thousand cubic feet per hour of atmospheric...Ch. 14.7 - Air enters a 40-cm-diameter cooling section at 1...Ch. 14.7 - Repeat Prob. 1479 for a total pressure of 88 kPa...Ch. 14.7 - On a summer day in New Orleans, Louisiana, the...Ch. 14.7 - Prob. 83PCh. 14.7 - Prob. 84PCh. 14.7 - Prob. 85PCh. 14.7 - Saturated humid air at 70 psia and 200F is cooled...Ch. 14.7 - Humid air is to be conditioned in a...Ch. 14.7 - Atmospheric air at 1 atm, 32C, and 95 percent...Ch. 14.7 - Prob. 89PCh. 14.7 - Prob. 90PCh. 14.7 - Does an evaporation process have to involve heat...Ch. 14.7 - Prob. 92PCh. 14.7 - Prob. 93PCh. 14.7 - Air enters an evaporative (or swamp) cooler at...Ch. 14.7 - Prob. 95PCh. 14.7 - Air at 1 atm, 20C, and 70 percent relative...Ch. 14.7 - Two unsaturated airstreams are mixed...Ch. 14.7 - Consider the adiabatic mixing of two airstreams....Ch. 14.7 - Two airstreams are mixed steadily and...Ch. 14.7 - A stream of warm air with a dry-bulb temperature...Ch. 14.7 - Prob. 104PCh. 14.7 - Prob. 105PCh. 14.7 - How does a natural-draft wet cooling tower work?Ch. 14.7 - What is a spray pond? How does its performance...Ch. 14.7 - The cooling water from the condenser of a power...Ch. 14.7 - A wet cooling tower is to cool 60 kg/s of water...Ch. 14.7 - Prob. 110PCh. 14.7 - Prob. 111PCh. 14.7 - Water at 30C is to be cooled to 22C in a cooling...Ch. 14.7 - Prob. 113PCh. 14.7 - Prob. 114RPCh. 14.7 - Determine the mole fraction of dry air at the...Ch. 14.7 - Prob. 116RPCh. 14.7 - Prob. 117RPCh. 14.7 - Prob. 118RPCh. 14.7 - Prob. 119RPCh. 14.7 - Prob. 120RPCh. 14.7 - Prob. 121RPCh. 14.7 - Prob. 122RPCh. 14.7 - Prob. 124RPCh. 14.7 - Prob. 125RPCh. 14.7 - Prob. 126RPCh. 14.7 - Prob. 128RPCh. 14.7 - Prob. 129RPCh. 14.7 - Air enters a cooling section at 97 kPa, 35C, and...Ch. 14.7 - Prob. 131RPCh. 14.7 - Atmospheric air enters an air-conditioning system...Ch. 14.7 - Humid air at 101.3 kPa, 36C dry bulb and 65...Ch. 14.7 - An automobile air conditioner uses...Ch. 14.7 - Prob. 135RPCh. 14.7 - Prob. 137RPCh. 14.7 - Conditioned air at 13C and 90 percent relative...Ch. 14.7 - Prob. 141FEPCh. 14.7 - A 40-m3 room contains air at 30C and a total...Ch. 14.7 - A room is filled with saturated moist air at 25C...Ch. 14.7 - Prob. 144FEPCh. 14.7 - The air in a house is at 25C and 65 percent...Ch. 14.7 - Prob. 146FEPCh. 14.7 - Air at a total pressure of 90 kPa, 15C, and 75...Ch. 14.7 - On the psychrometric chart, a cooling and...Ch. 14.7 - On the psychrometric chart, a heating and...Ch. 14.7 - An airstream at a specified temperature and...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Refrigeration and Air Conditioning Technology (Mi...
Mechanical Engineering
ISBN:9781305578296
Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson
Publisher:Cengage Learning
The Refrigeration Cycle Explained - The Four Major Components; Author: HVAC Know It All;https://www.youtube.com/watch?v=zfciSvOZDUY;License: Standard YouTube License, CC-BY