EBK FUNDAMENTALS OF AERODYNAMICS
EBK FUNDAMENTALS OF AERODYNAMICS
6th Edition
ISBN: 8220103146609
Author: Anderson
Publisher: YUZU
bartleby

Videos

Textbook Question
Book Icon
Chapter 19, Problem 19.1P

The wing on a Piper Cherokee general aviation aircraft is rectangular, with a span of 9.75 m and a chord of 1.6 m. The aircraft is flying at cruising speed ( 141 mi/h ) at sea level. Assume that the skin-friction drag on the wing can be approximated by the drag on a flat plate of the same dimensions. Calculate the skin-friction drag:

a. If the flow were completely laminar (which is not the case in real life)

b. If the flow were completely turbulent (which is more realistic) Compare the two results.

(a)

Expert Solution
Check Mark
To determine

The value of skin friction drags for laminar flow.

Answer to Problem 19.1P

The value of skin friction drag for laminar flow is 38.38N .

Explanation of Solution

Given:

The length of the wing is l=9.75m .

The chord of the wing is C=1.6m .

The cruising speed of the aircraft is V=141mi/h .

Formula used:

The expression for the area of wing is given as,

  A=l×C

The expression for the Reynolds number is given as,

  Re=ρ0VCμ0

Here, Re is the Reynolds number, μ0 is the dynamic viscosity of the air, ρ0 is the density of air.

The expression for the coefficient of drag is given as,

  Cd=1.328Re

The expression for the drag is given as,

  D=Cdρ0V2A2

Calculation:

The area of the wing can be calculated as,

  A=l×CA=9.75m×1.6mA=15.6m2

It is known that the density of the air is 1.225kg/m3 and the dynamic viscosity of the air is 1.78×105Pas .

The Reynolds number can be calculated as,

  Re=ρ0VCμ0Re=1.225kg/ m 3×( 141 mi/ h× 0.4470m/s 1 mi/h )×1.6m1.78× 10 5PasRe=6.90×106

The coefficient of the drag can be calculated as,

  Cd=1.328 ReCd=1.328 6.90× 10 6 Cd=5.05×104

The drag can be calculated as,

  D=Cdρ0V2A2D=5.05×104×1.225kg/ m 3× ( 141 mi/ h× 0.4470m/s 1 mi/h ) 2×15.6 m 22D=38.38N

Conclusion:

Therefore, the value of skin friction drag for laminar flow is 38.38N .

(b)

Expert Solution
Check Mark
To determine

The value of skin friction drags for turbulent flow.

Answer to Problem 19.1P

The value of skin friction drag for turbulent flow is 240.93N .

Explanation of Solution

The length of the wing is l=9.75m .

The chord of the wing is C=1.6m .

The cruising speed of the aircraft is V=141mi/h .

Formula used:

The expression for the area of wing is given as,

  A=l×C

The expression for the Reynolds number is given as,

  Re=ρ0VCμ0

Here, Re is the Reynolds number, μ0 is the dynamic viscosity of the air, ρ0 is the density of air,

The expression for the coefficient of drag is given as,

  Cd=0.074( Re)15

The expression for the drag is given as,

  D=Cdρ0V2A2

Calculation:

The area of the wing can be calculated as,

  A=l×CA=9.75m×1.6mA=15.6m2

It is known that the density of the air is 1.225kg/m3 and the dynamic viscosity of the air is 1.78×105Pas .

The Reynolds number can be calculated as,

  Re=ρ0VCμ0Re=1.225kg/ m 3×( 141 mi/ h× 0.4470m/s 1 mi/h )×1.6m1.78× 10 5PasRe=6.90×106

The coefficient of the drag can be calculated as,

  Cd=0.074 ( Re ) 1 5 Cd=0.074 ( 6.90× 10 6 ) 1 5 Cd=3.17×103

The drag can be calculated as,

  D=Cdρ0V2A2D=3.17×103×1.225kg/ m 3× ( 141 mi/ h× 0.4470m/s 1 mi/h ) 2×15.6 m 22D=240.93N

The value of skin friction drag for turbulent flow is 240.93N and The value of skin friction drag for laminar flow is 38.38N .

By comparing these two results, it is showing that the skin drag force in turbulent flow is 6.27 times greater than the skin drag force in laminar flow.

Conclusion:

Therefore, the value of skin friction drag for turbulent flow is 240.93N .

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
Fairings are attached to the front and back of a cylindrical body to make it look more streamlined. What is the effect of this modification on the (a) friction drag, (b) pressure drag, and (c) total drag? Assume the Reynolds number is high enough so that the flow is turbulent for both cases.
Name some applications in which a large drag is desired.
The airfoil section of the wing of the British Spitfire of World War II fame is an NACA 2213 at the wing root, tapering to an NACA 2205 at the wing tip. The root chord is 8.33 ft. The measured profile drag coefficient of the NACA 2213 airfoil is 0.006 at a Reynolds number of 9 × 106. Consider the Spitfire cruising at an altitude of 19000 ft. Assume that μ varies as the square root of temperature. At this velocity and altitude, assuming completely turbulent flow, estimate the skin-friction drag coefficient for the NACA 2213 airfoil, and compare this with the total profile drag coefficient. Calculate the percentage of the profile drag coefficient that is due to pressure drag. (Round the final answer to three decimal places.)     The skin-friction drag coefficient for the NACA 2213 airfoil is  .
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Principles of Heat Transfer (Activate Learning wi...
Mechanical Engineering
ISBN:9781305387102
Author:Kreith, Frank; Manglik, Raj M.
Publisher:Cengage Learning
Ficks First and Second Law for diffusion (mass transport); Author: Taylor Sparks;https://www.youtube.com/watch?v=c3KMpkmZWyo;License: Standard Youtube License