Air isn’t a perfect electric insulator, but it has a very high resistivity. Dry air has a resistivity of approximately 3 × 1013 Ω · m. A capacitor has square plates 10 cm on a side separated by 1.2 mm of dry air. If the capacitor is charged to 250 V, what fraction of the charge will flow across the air gap in 1 minute? Make the approximation that the potential difference doesn’t change as the charge flows.
Trending nowThis is a popular solution!
Chapter 22 Solutions
College Physics- Package
Additional Science Textbook Solutions
University Physics with Modern Physics (14th Edition)
Essential University Physics (3rd Edition)
Physics for Scientists and Engineers: A Strategic Approach with Modern Physics (4th Edition)
Essential University Physics: Volume 2 (3rd Edition)
University Physics (14th Edition)
Conceptual Physics (12th Edition)
- An uncharged capacitor and a resistor are connected in series to a battery. If V=35V, C=6µF, and R=8×Ω. Find the max charge, max current, and charge as a function of time.arrow_forwardIn the figure the ideal batteries have emfs ε1 = 150 V and ε2 = 50 V and the resistances are R1 = 3.0 Ω and R2 = 2.0 Ω. If the potential at P is defined to be 95 V, what is the potential at Q?arrow_forwardA 15 μF capacitor initially charged to 25 μC is discharged through a 1.2 kΩ resistor. How long does it take to reduce the capacitor's charge to 10 μC?arrow_forward
- A rod of semiconducting material of Length L=2 m and cross-sectional area A=4 mm2 lies along the x-axis between x=0 and x=L. The material obeys ohm’s Law, and its resistivity varies along the rod according to ρ = ρ0*( 1 - x2/L2) where ρ0=3 x 10-4 Ω.m. The end of the rod at x=0 is at potential V0=25 V greater than the end at x=L. What is the electric potential, in units of volt, in the rod at x=L/2?arrow_forwardA straight, cylindrical wire lying along the x axis has a length of 0.500 m and a diameter of 0.200 mm. It is made of a material described by Ohm’s law with a resistivity of ρ = 4.00 x 10-8 Ω ⋅ m. Assume a potential of 4.00 V is maintained at the left end of the wire at x = 0. Also assume V = 0 at x = 0.500 m. Find (a) the magnitude and direction of the electric field in the wire, (b) the resistance of the wire, (c) the magnitude and direction of the electric current in the wire, and (d) the current density in the wire. (e) Show that E = ρJ.arrow_forwardDry air is a pretty decent insulator; it has a very high resistivity of 3×10^13Ω⋅m . Consider a capacitor that has square plates 15 cm on a side, separated by 0.8 mm of dry air. The capacitor is charged such that it has a potential of 320 V between the plates. 1. First, what is the resistance of the volume of air between the plates in GΩ (to 3 significant digits)? A: 1070 2. What is the capacitance of this capacitor (in pF to 3 significant digits)? A: 248 3. How much charge is stored on the plates of this capacitor when fully charged (in nC to 2 significant digits)? A: 80 4. How much energy does this capacitor store when fully charged (in μJ with 2 significant digits)? 5. Assuming the voltage on the plates is held fixed, what fraction of the total energy stored in the capacitor is dissipated via conduction through air between the plates in 1 minute? (precision 0.01) Please only solve Q4 and Q5arrow_forward
- A straight, cylindrical wire lying along the x axis has a length of 0.5 m and a diameter of0.2 mm. It is made of a material described by Ohm’s law with a resistivity of ρ 4 × 10-8Ωm. Assume a potential of 4 V is maintained at the left end of the wire at x = 0. Alsoassume V = 0 at x = 0.5 m. Find (a) the magnitude and direction of the electric field in thewire, (b) the resistance of the wire, (c) the magnitude and direction of the electric currentin the wire, and (d) the current density in the wire. (e) Show that E = ρ J. (E = −dVdx)arrow_forwardTwo parallel plates with an area of 3.0 cm2 are separated by a 2.5 mm thick dielectric with a constant of 4.70. If the potential difference between the plates is 120 V and the conduction current ic is 6.00 mA a) what is the charge (q) on each plate?arrow_forwardA copper wire of radius a = 0.256 mm has an aluminum jacket of outer radius b = 0.337 mm. There is a current i = 1.59 A in the composite wire. Take the resistivity for copper and aluminum to be 1.69 × 10-8Ω·m and 2.75 × 10-8Ω·m. Calculate the current in (a) the copper and (b) the aluminum. (c) If a potential difference V = 15.0 V between the ends maintains the current, what is the length in meters of the composite wire?arrow_forward
- A current I =0.35 A flows through a cylindrical resistor made out of some unknown ceramic-like composite. The radius of the cylindrical body is 4.25 mm while the length is 1.65 cm. If the potential drop over the resistor is 7.54 V, what is the resistivity of the unknown ceramic material? (Answer in Ohm*m)arrow_forwardA straight, cylindrical wire lying along the x axis has a length of 0.515 m and a diameter of 0.195 mm. It is made of a material described by Ohm's law with a resistivity of ? = 4.00 ✕ 10−8 Ω · m. Assume a potential of 4.00 V is maintained at the left end of the wire at x = 0. Also assume V = 0 at x = 0.515 m. (a) Find the magnitude (in V/m) and direction of the electric field in the wire. (b) Find the resistance of the wire (in Ω). (c) Find the magnitude (in A) and direction of the electric current in the wire. (d) Find the current density in the wire (in MA/m2). See image for the full question.arrow_forwardThe strain in a wire can be monitored and computed by measuring the resistance of the wire. Let Li represent the original length of the wire, Ai its original cross-sectional area, Ri = ρLi /Ai the original resistance between its ends, and δ = ΔL/Li = (L - Li )/Li the strain resulting from the application of tension. Assume the resistivity and the volume of the wire do not change as the wire stretches. (a) Show that the resistance between the ends of the wire under strain is given by R = Ri (1 + 2δ + δ2). (b) If the assumptions are precisely true, is this result exact or approximate? Explain your answer.arrow_forward
- Principles of Physics: A Calculus-Based TextPhysicsISBN:9781133104261Author:Raymond A. Serway, John W. JewettPublisher:Cengage Learning