The transmit pair of twisted pair cable uses simplex transmission, receiving pair of the cable also uses simplex transmission and the twisted-pair cable uses Half-duplex transmissions. Hence, the correct option is “ C ”.

Question

Want to see more full solutions like this?

Answer 1

Expert Solution & Answer

Chapter 5, Problem 1RQ

Program Description Answer

The transmit pair of twisted pair cable uses simplex transmission, receiving pair of the cable also uses simplex transmission and the twisted-pair cable uses Half-duplex transmissions.

Hence, the correct option is “C”.

Expert Solution & Answer

Explanation of Solution

Simplex:

The communication is unidirectional in simplex mode.
On a link, one of the two devices will transmit and the other device will receive.
To send data in a direction, it can use the entire capacity of the channel.
Examples are keyboards and monitors.

Half Duplex:

Each device can transmit and receive in half-duplex mode but not at the same time.
When one device is sending, then the other device can receive and so on.
So this mode is used in cases when there is a need for communication on both sides but not at the same time.

Explanation for incorrect options:

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable uses simplex and the twisted pair cable uses half duplex transmission but the receiving pair in the cable do not use half duplex transmission

Hence, the option “A” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable do not use half duplex and the twisted pair cable do not use simplex transmission but the receiving pair in the cable uses simplex transmission

Hence, the option “B” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then receiving pair of the cable do not use half duplex and the twisted pair cable do not use simplex transmission but the transmit pair of the twisted-pair cable uses simplex transmission.

Hence, the option “D” is wrong.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 2

Expert Solution & Answer

Chapter 5, Problem 1RQ

Program Description Answer

The transmit pair of twisted pair cable uses simplex transmission, receiving pair of the cable also uses simplex transmission and the twisted-pair cable uses Half-duplex transmissions.

Hence, the correct option is “C”.

Expert Solution & Answer

Explanation of Solution

Simplex:

The communication is unidirectional in simplex mode.
On a link, one of the two devices will transmit and the other device will receive.
To send data in a direction, it can use the entire capacity of the channel.
Examples are keyboards and monitors.

Half Duplex:

Each device can transmit and receive in half-duplex mode but not at the same time.
When one device is sending, then the other device can receive and so on.
So this mode is used in cases when there is a need for communication on both sides but not at the same time.

Explanation for incorrect options:

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable uses simplex and the twisted pair cable uses half duplex transmission but the receiving pair in the cable do not use half duplex transmission

Hence, the option “A” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable do not use half duplex and the twisted pair cable do not use simplex transmission but the receiving pair in the cable uses simplex transmission

Hence, the option “B” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then receiving pair of the cable do not use half duplex and the twisted pair cable do not use simplex transmission but the transmit pair of the twisted-pair cable uses simplex transmission.

Hence, the option “D” is wrong.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 3

Expert Solution & Answer

Chapter 5, Problem 1RQ

Program Description Answer

The transmit pair of twisted pair cable uses simplex transmission, receiving pair of the cable also uses simplex transmission and the twisted-pair cable uses Half-duplex transmissions.

Hence, the correct option is “C”.

Expert Solution & Answer

Explanation of Solution

Simplex:

The communication is unidirectional in simplex mode.
On a link, one of the two devices will transmit and the other device will receive.
To send data in a direction, it can use the entire capacity of the channel.
Examples are keyboards and monitors.

Half Duplex:

Each device can transmit and receive in half-duplex mode but not at the same time.
When one device is sending, then the other device can receive and so on.
So this mode is used in cases when there is a need for communication on both sides but not at the same time.

Explanation for incorrect options:

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable uses simplex and the twisted pair cable uses half duplex transmission but the receiving pair in the cable do not use half duplex transmission

Hence, the option “A” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable do not use half duplex and the twisted pair cable do not use simplex transmission but the receiving pair in the cable uses simplex transmission

Hence, the option “B” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then receiving pair of the cable do not use half duplex and the twisted pair cable do not use simplex transmission but the transmit pair of the twisted-pair cable uses simplex transmission.

Hence, the option “D” is wrong.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 4

Expert Solution & Answer

Chapter 5, Problem 1RQ

Program Description Answer

The transmit pair of twisted pair cable uses simplex transmission, receiving pair of the cable also uses simplex transmission and the twisted-pair cable uses Half-duplex transmissions.

Hence, the correct option is “C”.

Expert Solution & Answer

Explanation of Solution

Simplex:

The communication is unidirectional in simplex mode.
On a link, one of the two devices will transmit and the other device will receive.
To send data in a direction, it can use the entire capacity of the channel.
Examples are keyboards and monitors.

Half Duplex:

Each device can transmit and receive in half-duplex mode but not at the same time.
When one device is sending, then the other device can receive and so on.
So this mode is used in cases when there is a need for communication on both sides but not at the same time.

Explanation for incorrect options:

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable uses simplex and the twisted pair cable uses half duplex transmission but the receiving pair in the cable do not use half duplex transmission

Hence, the option “A” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable do not use half duplex and the twisted pair cable do not use simplex transmission but the receiving pair in the cable uses simplex transmission

Hence, the option “B” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then receiving pair of the cable do not use half duplex and the twisted pair cable do not use simplex transmission but the transmit pair of the twisted-pair cable uses simplex transmission.

Hence, the option “D” is wrong.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 5

Expert Solution & Answer

Answer 6

Expert Solution & Answer

Answer 7

Chapter 5, Problem 1RQ

Program Description Answer

The transmit pair of twisted pair cable uses simplex transmission, receiving pair of the cable also uses simplex transmission and the twisted-pair cable uses Half-duplex transmissions.

Hence, the correct option is “C”.

Expert Solution & Answer

Explanation of Solution

Simplex:

The communication is unidirectional in simplex mode.
On a link, one of the two devices will transmit and the other device will receive.
To send data in a direction, it can use the entire capacity of the channel.
Examples are keyboards and monitors.

Half Duplex:

Each device can transmit and receive in half-duplex mode but not at the same time.
When one device is sending, then the other device can receive and so on.
So this mode is used in cases when there is a need for communication on both sides but not at the same time.

Explanation for incorrect options:

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable uses simplex and the twisted pair cable uses half duplex transmission but the receiving pair in the cable do not use half duplex transmission

Hence, the option “A” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable do not use half duplex and the twisted pair cable do not use simplex transmission but the receiving pair in the cable uses simplex transmission

Hence, the option “B” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then receiving pair of the cable do not use half duplex and the twisted pair cable do not use simplex transmission but the transmit pair of the twisted-pair cable uses simplex transmission.

Hence, the option “D” is wrong.

Answer 8

Chapter 5, Problem 1RQ

Program Description Answer

The transmit pair of twisted pair cable uses simplex transmission, receiving pair of the cable also uses simplex transmission and the twisted-pair cable uses Half-duplex transmissions.

Hence, the correct option is “C”.

Expert Solution & Answer

Explanation of Solution

Simplex:

The communication is unidirectional in simplex mode.
On a link, one of the two devices will transmit and the other device will receive.
To send data in a direction, it can use the entire capacity of the channel.
Examples are keyboards and monitors.

Half Duplex:

Each device can transmit and receive in half-duplex mode but not at the same time.
When one device is sending, then the other device can receive and so on.
So this mode is used in cases when there is a need for communication on both sides but not at the same time.

Explanation for incorrect options:

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable uses simplex and the twisted pair cable uses half duplex transmission but the receiving pair in the cable do not use half duplex transmission

Hence, the option “A” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable do not use half duplex and the twisted pair cable do not use simplex transmission but the receiving pair in the cable uses simplex transmission

Hence, the option “B” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then receiving pair of the cable do not use half duplex and the twisted pair cable do not use simplex transmission but the transmit pair of the twisted-pair cable uses simplex transmission.

Hence, the option “D” is wrong.

Answer 9

Chapter 5, Problem 1RQ

Program Description Answer

The transmit pair of twisted pair cable uses simplex transmission, receiving pair of the cable also uses simplex transmission and the twisted-pair cable uses Half-duplex transmissions.

Hence, the correct option is “C”.

Answer 10

Expert Solution & Answer

Explanation of Solution

Simplex:

The communication is unidirectional in simplex mode.
On a link, one of the two devices will transmit and the other device will receive.
To send data in a direction, it can use the entire capacity of the channel.
Examples are keyboards and monitors.

Half Duplex:

Each device can transmit and receive in half-duplex mode but not at the same time.
When one device is sending, then the other device can receive and so on.
So this mode is used in cases when there is a need for communication on both sides but not at the same time.

Explanation for incorrect options:

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable uses simplex and the twisted pair cable uses half duplex transmission but the receiving pair in the cable do not use half duplex transmission

Hence, the option “A” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then the transmit pair of the twisted-pair cable do not use half duplex and the twisted pair cable do not use simplex transmission but the receiving pair in the cable uses simplex transmission

Hence, the option “B” is wrong.

When an Ethernet NIC was configured by operating system to use half duplex transmission, then receiving pair of the cable do not use half duplex and the twisted pair cable do not use simplex transmission but the transmit pair of the twisted-pair cable uses simplex transmission.

Hence, the option “D” is wrong.