Chapter 6, Problem 9P

A cylindrical specimen of a titanium alloy having an elastic modulus of 107 GPa and an original diameter of 3.8 mm. will experience only elastic deformation when a tensile load of 2000 N is applied. Compute the maximum length of the specimen before deformation if the maximum allowable elongation is 0.42 mm

For a face center cubic crystal, where the applied load is in the [1 0 0] direction, assume the ABC is the slip plane where A[1 0 0], B [0 0 1] and C [0.1, 1 0] 1. Find the normal vector to the above slip plane. 2. Find the angle phi, between the normal to the slip plane and the applied load direction. 3. Find the angle Lamda between applied load and slip direction, assume slip direction is the direction BA

If the rod is to be heated so that it will fit into the hole what will be the temperature in °C? Assume: Your house's temperature is 25°C The length of the rod is around 10 mm linear coefficient of the metal rod is 4.5x10-6 °C and for the stainless steel is 16 x 10-6 °C