Concept explainers
MiniTek manufactures private-label small electronic products, such as alarm clocks, calculators, kitchen timers, stopwatches, and automatic pencil sharpeners. Some of the products are sold as sets, and others are sold individually. Products are studied as to their sales potential, and then cost estimates are made. The Engineering Department develops production plans, and then production begins. The company has generally had very successful product introductions. Only two products introduced by the company have been discontinued.
One of the products currently sold is a multi-alarm clock. The clock has four alarms that can be programmed to sound at various times and for varying lengths of time. The company has experienced a great deal of difficulty in making the circuit boards for the clocks. The production process has never operated smoothly. The product is unprofitable at the present time, primarily because of warranty repairs and product recalls. Two models of the clocks were recalled, for example, because they sometimes caused an electric shock when the alarms were being shut off. The Engineering Department is attempting to revise the manufacturing process, but the revision will take another 6 months at least.
The clocks were very popular when they were introduced, and since they are private-label, the company has not suffered much from the recalls. Presently, the company has a very large order for several items from Kmart Stores. The order includes 5,000 of the multi-alarm clocks. When the company suggested that Kmart purchase the clocks from another manufacturer. Kmart threatened to rescind the entire order unless the clocks were included.
The company has therefore investigated the possibility of having another company make the clocks for them. The clocks were bid for the Kmart order based on an estimated $6.90 cost to manufacture:
Circuit board. 1 each @ $2.00 | $2.00 |
Plastic case, 1 each @ $0.80 | 0.80 |
Alarms. 4 @ $0.15 each | 0.60 |
Labor, 15 minutes $12/hour | 3.00 |
Overhead, $2.00 per labor hour | 0.50 |
MiniTek could purchase clocks to fill the Kmart order for $10 from Trans-Tech Asia, a Korean manufacturer with a very good quality record. TVans-Tech has offered to reduce the price to $7.50 after MiniTek has been a customer for 6 months, placing an order of at least 1,000 units per month. If MiniTek becomes a “preferred customer” by purchasing 15,000 units per year, the price would be reduced still further to $4.50.
Omega Products, a local manufacturer, has also offered to make clocks for MiniTek. They have offered to sell 5,000 clocks for $5 each. However, Omega Products has been in business for only 6 months. They have experienced significant turnover in their labor force, and the local press has reported that the owners may face tax evasion charges soon. The owner of Omega Products is an electronic engineer, however, and the quality of the clocks is likely to be good.
If MiniTek decides to purchase the clocks from either Trans-Tech or Omega, all the costs to manufacture could be avoided, except a total of $1,000 in overhead costs for machine
Instructions
(a) What is the difference in profit under each of the alternatives if the clocks are to be sold for $14.50 each to Kmart?
(b) What are the most important nonfinancial factors that MiniTek should consider when making this decision?
(c) What do you think MiniTek should do in regard to the Kmart order? What should it do in regard to continuing to manufacture the multi-alarm clocks? Be prepared to defend your answer.
Want to see the full answer?
Check out a sample textbook solutionChapter 7 Solutions
Managerial Accounting: Tools for Business Decision Making 7e Binder Ready Version + WileyPLUS Registration Card
- Pharoah Company manufactures equipment. Pharoah’s products range from simple automated machinery to complex systems containing numerous components. Unit selling prices range from $200,000 to $1,500,000 and are quoted inclusive of installation. The installation process does not involve changes to the features of the equipment and does not require proprietary information about the equipment in order for the installed equipment to perform to specifications. Pharoah has the following arrangement with Winkerbean Inc. ● Winkerbean purchases equipment from Pharoah for a price of $960,000 and contracts with Pharoah to install the equipment. Pharoah charges the same price for the equipment irrespective of whether it does the installation or not. Using market data, Pharoah determines installation service is estimated to have a standalone selling price of $51,000. The cost of the equipment is $570,000. ● Winkerbean is obligated to pay Pharoah the $960,000 upon the delivery and…arrow_forwardPronghorn Company manufactures equipment. Pronghorn’s products range from simple automated machinery to complex systems containing numerous components. Unit selling prices range from $200,000 to $1,500,000 and are quoted inclusive of installation. The installation process does not involve changes to the features of the equipment and does not require proprietary information about the equipment in order for the installed equipment to perform to specifications. Pronghorn has the following arrangement with Winkerbean Inc. ● Winkerbean purchases equipment from Pronghorn for a price of $1,070,000 and contracts with Pronghorn to install the equipment. Pronghorn charges the same price for the equipment irrespective of whether it does the installation or not. The cost of the equipment is $599,000. ● Winkerbean is obligated to pay Pronghorn the $1,070,000 upon the delivery and installation of the equipment. Pronghorn delivers the equipment on June 1, 2020, and completes the…arrow_forwardSembotix Company has several divisions including a Semiconductor Division that sells semiconductors to both internal and external customers. The company’s X-ray Division uses semiconductors as a component in its final product and is evaluating whether to purchase them from the Semiconductor Division or from an external supplier. The market price for semiconductors is $100 per 100 semiconductors. Dave Bryant is the controller of the X-ray Division, and Howard Hillman is the controller of the Semiconductor Division. The following conversation took place between Dave and Howard: Dave: I hear you are having problems selling semiconductors out of your division. Maybe I can help. Howard: You’ve got that right. We’re producing and selling at about 90% of our capacity to outsiders. Last year, we were selling 100% of capacity. Would it be possible for your division to pick up some of our excess capacity? After all, we are part of the same company. Dave: What kind of price could you give…arrow_forward
- Zodiac Sound Company manufactures audio systems, both made-to-order and mass-produced systems that are typically sold to large- scale manufacturers of electronics equipment. For competitive reasons, the company is trying to increase its manufacturing cycle efficiency (MCE) measure. As a strategy for improving its MCE performance, the company is considering a switch to JIT manufacturing. While the company managers have a fairly good feel for the costs of implementing JIT, they are unsure about the benefits of such a move, both in financial and nonfinancial terms. To help inform the ultimate decision regarding a move to a JIT system, you've been asked to provide some input. Fortunately, you've recently attended a continuing professional education (CPE) workshop on the costs and benefits of moving to JIT and therefore feel comfortable responding to management's request. Required: 3. Given the estimated data below, calculate the MCE for both the current manufacturing process and the…arrow_forwardSembotix Company has several divisions including a Semiconductor Division that sells semiconductors to both internal and external customers. The company's X-ray Division uses semiconductors as a component in its final product and is evaluating whether to purchase them from the Semiconductor Division or from an external supplier. The market price for semiconductors is $100 per 100 semiconductors. Dave Bryant is the controller of the X-ray Division, and Howard Hillman is the controller of the Semiconductor Division. The following conversation took place between Dave and Howard: Dave: I hear you are having problems selling semiconductors out of your division. Maybe I can help. Howard: You've got that right. We're producing and selling at about 90% of our capacity to outsiders. Last year we were selling 100% of capacity. Would it be possible for your division to pick up some of the excess capacity? After all, we are part of the same company. Dave: What kind of price can you give me?…arrow_forwardZodiac Sound Company manufactures audio systems, both made-to-order and mass-produced systems that are typically sold to large- scale manufacturers of electronics equipment. For competitive reasons, the company is trying to increase its manufacturing cycle efficiency (MCE) measure. As a strategy for improving its MCE performance, the company is considering a switch to JIT manufacturing. While the company managers have a fairly good feel for the costs of implementing JIT, they are unsure about the benefits of such a move, both in financial and nonfinancial terms. To help inform the ultimate decision regarding a move to a JIT system, you've been asked to provide some input. Fortunately, you've recently attended a continuing professional education (CPE) workshop on the costs and benefits of moving to JIT and therefore feel comfortable responding to management's request. Required: 3. Given the estimated data below, calculate the MCE for both the current manufacturing process and the…arrow_forward
- Headland Company manufactures equipment. Headland's products range from simple automated machinery to complex systems containing numerous components. Unit selling prices range from $200,000 to $1,500,000 and are quoted inclusive of installation. The installation process does not involve changes to the features of the equipment and does not require proprietary information about the equipment in order for the installed equipment to perform to specifications. Headland has the following arrangement with Winkerbean Inc. Winkerbean purchases equipment from Headland for a price of $1,040,000 and contracts with Headland to install the equipment. Headland charges the same price for the equipment irrespective of whether it does the installation or not. The cost of the equipment is $620,000. Winkerbean is obligated to pay Headland the $1,040,000 upon the delivery and installation of the equipment. Headland delivers the equipment on June 1, 2020, and completes the installation of the equipment on…arrow_forwardPearson Company manufactures a variety of electronic printed circuit boards (PCBs) that go into cellular phones. The company has just received an offer from an outside supplier to provide the electrical soldering for Pearson’s Motorola product line (Z-7 PCB, slimline). The quoted price is $4.80 per unit. Pearson is interested in this offer, since its own soldering operation of the PCB is at its peak capacity. Outsourcing option. The company estimates that if the supplier’s offer were accepted, the direct labor and variable overhead costs of the Z-7 slimline would be reduced by 15% and the direct material cost would be reduced by 20%. In-house production option. Under the present operations, Pearson manufactures all of its own PCBs from start to finish. The Z-7 slimlines are sold through Motorola at $20 per unit. Fixed overhead charges to the Z-7 slimline total $20,000 each year. The further breakdown of producing one unit is as follows: The manufacturing overhead of $4.00 per unit…arrow_forwardCrankshaft Company manufactures equipment. Crankshaft's products range from simple automated machinery to complex systems containing numerous components. Unit selling prices range from $200,000 to $1,500,000 and are quoted inclusive of installation. The installation process does not involve changes to the features of the equipment and does not require proprietary information about the equipment in order for the installed equipment to perform to specifications. Crankshaft has the following arrangement with Winkerbean Inc. Winkerbean purchases equipment from Crankshaft for a price of $1,000,000 and contracts with Crankshaft to install the equipment. Crankshaft charges the same price for the equipment irrespective of whether it does the installation or not. Using market data, Crankshaft determines installation service is estimated to have a standalone selling price of $50,000. The cost of the equipment is $600,000. Winkerbean is obligated to pay Crankshaft the $1,000,000 upon the delivery…arrow_forward
- Riverbed Company manufactures equipment. Riverbed's products range from simple automated machinery to complex systems containing numerous components. Unit selling prices range from $ 200,000 to $ 1,500,000 and are quoted inclusive of installation. The installation process does not involve changes to the features of the equipment and does not require proprietary information about the equipment in order for the installed equipment to perform to specifications. Riverbed has the following arrangement with Winkerbean Inc. Winkerbean purchases equipment from Riverbed fora price of $ 1,100,000 and contracts with Riverbed to install the equipment. Riverbed charges the same price for the equipment irrespective of whether it does the installation or not. Using market data, Riverbed determines installation service is estimated to have a standalone selling price of $ 46,000. The cost of the equipment is $ 580,000. Winkerbean is obligated to pay Riverbed the $ 1,100,000 upon the delivery and…arrow_forwardOriole Company manufactures equipment. Oriole's products range from simple automated machinery to complex systems containing numerous components. Unit selling prices range from $400,000 to $1,500,000 and are quoted inclusive of installation. The installation process does not involve changes to the features of the equipment and does not require proprietary information about the equipment in order for the installed equipment to perform to specifications. Oriole has the following arrangement with Henderson Inc. Henderson purchases equipment from Oriole for a price of $1,020,000 and contracts with Oriole to install the equipment. Oriole charges the same price for the equipment irrespective of whether it does the installation or not. The cost of the equipment is $643,00o. Henderson is obligated to pay Oriole the $1,020,000 upon the delivery and installation of the equipment. Oriole delivers the equipment on June 1, 2020, and completes the installation of the equipment on September 30, 2020.…arrow_forwardWildhorse Company manufactures equipment. Wildhorse’s products range from simple automated machinery to complex systems containing numerous components. Unit selling prices range from $200,000 to $1,500,000 and are quoted inclusive of installation. The installation process does not involve changes to the features of the equipment and does not require proprietary information about the equipment in order for the installed equipment to perform to specifications. Wildhorse has the following arrangement with Winkerbean Inc. ● Winkerbean purchases equipment from Wildhorse for a price of $940,000 and contracts with Wildhorse to install the equipment. Wildhorse charges the same price for the equipment irrespective of whether it does the installation or not. Using market data, Wildhorse determines installation service is estimated to have a standalone selling price of $49,000. The cost of the equipment is $600,000. ● Winkerbean is obligated to pay Wildhorse the $940,000 upon the…arrow_forward
- AccountingAccountingISBN:9781337272094Author:WARREN, Carl S., Reeve, James M., Duchac, Jonathan E.Publisher:Cengage Learning,Accounting Information SystemsAccountingISBN:9781337619202Author:Hall, James A.Publisher:Cengage Learning,
- Horngren's Cost Accounting: A Managerial Emphasis...AccountingISBN:9780134475585Author:Srikant M. Datar, Madhav V. RajanPublisher:PEARSONIntermediate AccountingAccountingISBN:9781259722660Author:J. David Spiceland, Mark W. Nelson, Wayne M ThomasPublisher:McGraw-Hill EducationFinancial and Managerial AccountingAccountingISBN:9781259726705Author:John J Wild, Ken W. Shaw, Barbara Chiappetta Fundamental Accounting PrinciplesPublisher:McGraw-Hill Education