Anna Garden recently opened her own basketweaving studio. She sells finished baskets in addition to the raw materials needed by customers to weave baskets of their own. Anna has put together a variety of raw material kits, each including materials at various stages of completion. Unfortunately, owing to space limitations, Anna is unable to carry all varieties of kits originally assembled and must choose between two basic packages.
The basic introductory kit includes undyed, uncut reeds (with dye included) for weaving one basket. This basic package costs Anna $16 and sells for $30. The second kit, called Stage 2, includes cut reeds that have already been dyed. With this kit the customer need only soak the reeds and weave the basket. Anna is able to produce the second kit by using the basic materials included in the first kit and adding one hour of her own time, which she values at $18 per hour. Because she is more efficient at cutting and dying reeds than her average customer, Anna is able to make two kits of the dyed reeds, in one hour, from one kit of undyed reeds. The Stage 2 kit sells for $36.
Instructions
Determine whether Annas basketweaving studio should carry the basic introductory kit with undyed and uncut reeds or the Stage 2 kit with reeds already dyed and cut. Prepare an incremental analysis to support your answer.
Want to see the full answer?
Check out a sample textbook solutionChapter 7 Solutions
MANAGERIAL ACCT.-WILEYPLUS BLKBRD PKG
- Indigo Design Inc., a high-fashion women’s dress manufacturer, is planning to market a new cocktail dress for the coming season. Indigo Design supplies retailers in Toronto, Montreal, and the Atlantic provinces.Four metres of material are laid out for the dress pattern. After cutting, some material remains, which can be sold as remnants. The company could also use the leftover material to manufacture a matching cape and handbag. However, if it uses the leftover material for the cape and handbag, more care will be needed in the cutting, and the cutting costs will therefore increase.The company expects to sell 3,200 dresses if a matching cape and handbag are not available. Indigo Design’s market research reveals, however, that dress sales would be 25% higher if a matching cape and handbag were available. The market research indicates that the cape and/or handbag could not be sold individually but only as accessories with the dress. The various combinations of dresses, capes, and handbags…arrow_forwardMcCourt Company produces two types of leather purses: standard and handcrafted. Both purses use equipment for cutting and stitching. The equipment also has the capability of creating standard designs. The standard purses use only these standard designs. They are all of the same size to accommodate the design features of the equipment. The handcrafted purses can be cut to any size because the designs are created manually. Many of the manually produced designs are in response to specific requests of retailers. The equipment must be specially configured to accommodate the production of a batch of purses that will receive a handcrafted design McCourt Company assigns overhead using direct labor dollars. Muggs Clark, sales manager, is convinced that the purses are not being costed correctly. To illustrate his point, he decided to focus on the expected annual setup and machine-related cut to. costs, which are as follows: Setup equipment $ 45,000 Depreciation 50,000…arrow_forwardA manufacturer of packaging for companies that produce breakfast cereals is considering alternatives regarding the process it uses to pre-process carton paper used to make the packaging. Historically, the company has been using equipment which cuts raw carton paper received from its various suppliers. This cut paper is further painted and assembled into a box shape by two other pieces of equipment. Recently, however, most of its customers began requesting that certain design elements be pressed into the packaging, giving the packaging more visual appeal. The customers were willing to pay more for the added service, making it particularly lucrative for the firm to have incorporate this possibility into its packaging offerings. Managers believed that the existing equipment would be able to handle the new process with certain modifications. In addition to modifying the existing equipment, the company two other alternatives. All alternatives will be able to produce the desired result, will…arrow_forward
- Pocket Umbrella, Inc. is considering producing a new type of umbrella. This new pocket-sized umbrella would fit into a coat pocket or purse. Classify the following costs of this new product as direct materials, direct labor, manufacturing overhead, or selling and administrative. Cost of advertising the product Fabric used to make the umbrellas Maintenance of cutting machines used to cut the umbrella fabric so it will fit the umbrella frame Wages of workers who assemble the product Presidents salary The salary of the supervisor of the people who assemble the product Wages of the product tester who stands in a shower to make sure the umbrellas do not leak Cost of market research survey Salary of the companys sales managers Depreciation of administrative office buildingarrow_forwardMoisha is developing material standards for her company. The operations manager wants grade A widgets because they are the easiest to work with and are the quality the customers want. Grade B will not work because customers do not want the lower grade, and it takes more time to assemble the product than with grade A materials. Moisha calls several suppliers to get prices for the widget. All are within $0.05 of each other. Since they will use millions of widgets, she decides that the $0.05 difference is important. The supplier who has the lowest price is known for delivering late and low-quality materials. Moisha decides to use the supplier who is $0.02 more but delivers on time and at the right quality. This supplier charges $0.48 per widget. Each unit of product requires four widgets. What is the standard cost per unit for widgets?arrow_forwardFreidrich is working with the operations manager to determine what the standard material cost is for a spice chest. He has watched the process from start to finish and taken detailed notes on what material is used. The easiest material to measure is the wood. Each chest uses 5 board feet and produces 1.5 feet of scrap. He is not sure what to do with the scrap that is produced; the company cannot buy the boards in any other dimensions. What amount of materials should be included in the standard for material costs?arrow_forward
- Cain Components manufactures and distributes various plumbing products used in homes and other buildings. Over time, the production staff has noticed that products they considered easy to make were difficult to sell at margins considered reasonable, while products that seemed to take a lot of staff time were selling well despite recent price increases. A summer intern has suggested that the cost system might be providing misleading information. The controller decided that a good summer project for the intern would be to develop, in one self-contained area of the plant, an alternative cost system with which to compare the current system. The intern identified the following cost pools and, after discussion with some plant personnel, appropriate cost drivers for each pool. There were: Cost Pools Costs Activity Drivers Receiving $ 600,000 Direct material cost Manufacturing 5,500,000 Machine-hours Machine setup 900,000 Production runs Shipping 1,000,000 Units shipped…arrow_forwardCain Components manufactures and distributes various plumbing products used in homes and other buildings. Over time, the production staff has noticed that products they considered easy to make were difficult to sell at margins considered reasonable, while products that seemed to take a lot of staff time were selling well despite recent price increases. A summer intern has suggested that the cost system might be providing misleading information. The controller decided that a good summer project for the intern would be to develop, in one self-contained area of the plant, an alternative cost system with which to compare the current system. The intern identified the following cost pools and, after discussion with some plant personnel, appropriate cost drivers for each pool. There were: Cost Pools Costs Activity Drivers Receiving $ 600,000 Direct material cost Manufacturing 5,500,000 Machine-hours Machine setup 900,000 Production runs Shipping 1,000,000 Units shipped…arrow_forwardCain Components manufactures and distributes various plumbing products used in homes and other buildings. Over time, the production staff has noticed that products they considered easy to make were difficult to sell at margins considered reasonable, while products that seemed to take a lot of staff time were selling well despite recent price increases. A summer intern has suggested that the cost system might be providing misleading information. The controller decided that a good summer project for the intern would be to develop, in one self-contained area of the plant, an alternative cost system with which to compare the current system. The intern identified the following cost pools and, after discussion with some plant personnel, appropriate cost drivers for each pool. There were: Cost Pools Costs Activity Drivers Receiving $ 600,000 Direct material cost Manufacturing 5,500,000 Machine-hours Machine setup 900,000 Production runs Shipping 1,000,000 Units shipped…arrow_forward
- The DecorIdeas Company manufactures hand-crafted natural wood displaycupboards. Currently the company makes only one size of display cupboard, which is60-inch height, 48-inch width, and 19-inch depth; and has 6 shelves. The finalproduct consists of a routed, sanded, assembled, and stained oak wood cupboard.Direct materials include oak shelving wood and hickory plywood backing board.Other materials, such as wood screws, sand paper, stain, wood glue, and packaging,are treated as indirect materials. DecorIdeas is preparing budgets for the fourthquarter ending December 31, 2022.For each requirement below prepare budgets by month for October, November, andDecember, and a total budget for the quarter. The previous year’s sales (2021/22) forthe corresponding period were:OctoberNovemberDecemberJanuaryFebruary2,0002,8004,0004,4003,600display cupboardsdisplay cupboardsdisplay cupboardsdisplay cupboardsdisplay cupboardsThe company expects the above volume of display cupboard sales to increase by…arrow_forwardWaterway has recently started to manufacture RecRobo, a three-wheeled robot that can scan a home for fires and gas leaks and then transmit this information to a mobile phone. The cost structure to manufacture 19,900 RecRobos is as follows: Cost Direct materials ($45 per robot) $895,500 Direct labor ($31 per robot) 616,900 Variable overhead ($8 per robot) 159,200 Allocated fixed overhead ($23 per robot) 457,700 Total $2,129,300 Waterway is approached by Cinrich Inc., which offers to make RecRobo for $83 per unit or $1,651,700. Using incremental analysis, determine whether Waterway should accept this offer under this following independent assumption: (see attachement). In attachement: see dropdown options. Please don't forget to answer: should the offer be accepted or not.arrow_forwardMoisha is developing material standards for her company. The operations manager wants grade A widgets because they are the easiest to work with and are the quality the customers want. Grade B will not work because customers do not want the lower grade, and it takes more time to assemble the product than with grade A materials. Moisha calls several suppliers to get prices for the widget. All are within $0.05 of each other. Since they will use millions of widgets, she decides that the $0.05 difference is important. The supplier who has the lowest price is known for delivering late and low-quality materials. Moisha decides to use the supplier who is $0.02 more but delivers on time and at the right quality. This supplier charges $0.41 per widget. Each unit of product requires 5 widgets. What is the standard cost per unit for widgets? Round your answer to two decimal places. Standard cost per unit $fill in the blank 1arrow_forward
- Principles of Accounting Volume 2AccountingISBN:9781947172609Author:OpenStaxPublisher:OpenStax College