CONNECT FOR THERMODYNAMICS: AN ENGINEERI
CONNECT FOR THERMODYNAMICS: AN ENGINEERI
9th Edition
ISBN: 9781260048636
Author: CENGEL
Publisher: MCG
bartleby

Concept explainers

bartleby

Videos

Question
Book Icon
Chapter 8.8, Problem 107RP

(a)

To determine

The final temperature in the cylinder at equilibrium condition.

(a)

Expert Solution
Check Mark

Answer to Problem 107RP

The final temperature in the cylinder at equilibrium condition is 56.0°C.

Explanation of Solution

Write the ideal gas equation to calculate the mass of the gas (m).

m=P1V1RT1 (I)

Here, initial pressure of the gas is P1, initial volume of the gas is V1, gas constant is R, and the initial temperature is T1.

Write the energy balance equation for the entire system considering it as a stationary closed system.

EinEout=ΔEsystem=00=ΔU

0=[mcv(T2T1)]N2+[mcv(T2T1)]He+[mcv(T2T1)]Cu (II)

Here, net energy input to the system is Ein, net energy output to the system is Eout, the change in net energy is ΔEsystem, change in internal energy is ΔU, constant volume specific heat is cv, final temperature is T2, and the initial temperature is T1.

Conclusion:

Refer the Table A-1E of “Molar mass, gas constant, and critical-point properties”, obtain the gas constants of Nitrogen and Helium as

RN2=0.2968kPam3/kgKRHe=2.0769kPam3/kgK

Refer the Table A-2E of “Ideal-gas specific heats of various common gases”, obtain the specific heats of Nitrogen, copper, and Helium as

cp,N2=1.039kJ/kg°Ccv,N2=0.743kJ/kg°Ccv,Cu=0.386kJ/kg°Ccp,He=5.1926kJ/kg°Ccv,He=3.1156kJ/kg°C

Substitute 500kPa for P1, 1m3 for V1, 0.2968kPam3/kgK for RN2, and 353K for T1,N2 in Equation (I).

mN2=500kPa×1m30.2968kPam3/kgK×353K=4.772kg

Substitute 500kPa for P1, 1m3 for V1, 2.0769kPam3/kgK for RHe, and 298K for T1,He in Equation (I).

mHe=500kPa×1m32.0769kPam3/kgK×298K=0.8079kg

Calculate the temperature of piston as the average temperature of nitrogen and helium (T1,Cu).

T1,Cu=80°C+25°C2=52.5°C

Substitute 4.772kg for mN2, 0.8079kg for mHe, 5kg for mCu, 0.386kJ/kg°C for cv,Cu, 0.743kJ/kg°C for cv,N2, 3.1156kJ/kg°C for cv,He, 80°C for T1,N2, 52.5°C for T1,Cu, and 25°C for T1,He in Equation (II).

0={4.772kg×0.743kJ/kg°C(T280°C)+0.8079kg×3.1156kJ/kg°C(T225°C)+5kg×0.386kJ/kg°C(T252.5°C)}T2=56.0°C

Thus, the final temperature in the cylinder at equilibrium condition is 56.0°C.

Final temperature at equilibrium condition is same even if the piston is restricted from moving.

(b)

To determine

The amount of wasted work potential for the process.

The amount of wasted work potential for the process when piston is restricted from moving.

(b)

Expert Solution
Check Mark

Answer to Problem 107RP

The amount of wasted work potential for the process is 9.08kJ.

The amount of wasted work potential for the process when piston is restricted from moving is 6.27kJ.

Explanation of Solution

Write the expression to calculate the total number of moles in the cylinder (Ntotal).

Ntotal=NN2+NHe

Ntotal=(mM)N2+(mM)He (III)

Write the expression to calculate the pressure from ideal gas expression.

P2=NtotalRuTVtotal (IV)

Here, universal gas constant is Ru and the total volume of the cylinder is Vtotal.

Write the entropy generation (Sgen) equation for the process from entropy balance.

SinSout+Sgen=ΔSsystemS˙gen=ΔSN2+ΔSHe+ΔSpiston

S˙gen={[m(cplnT2T1RlnP2P1)]N2+[m(cplnT2T1RlnP2P1)]He+(mcvlnT2T1)cu} (V)

Here, entropy input to the system is Sin, entropy exiting out is Sout, change in the entropy system is ΔSsystem,

Write the expression to calculate the exergy destroyed (X˙dest).

X˙dest=T0S˙gen (VI)

Here, the surrounding’s temperature is T0.

Write the formula to calculate the entropy generation when the piston is restricted to move.

S˙gen=[m(cvlnT2T1)]N2+[m(cvlnT2T1)]He+(mcvlnT2T1)cu (VII)

Conclusion:

Refer the Table A-1E of “Molar mass, gas constant, and critical-point properties”, obtain the molar masses of Nitrogen and Helium as

MN2=28kg/kmolMHe=4kg/kmol

Substitute 4.772kg for mN2, 0.8079kg for mHe, 28kg/kmol for MN2, and 4kg/kmol for MHe in Equation (III).

Ntotal=(4.772kg28kg/kmol)+(0.8079kg4kg/kmol)=0.3724kmol

Substitute 0.3724kmol for Ntotal, 8.314kPam3/kmolK for Ru, 329K for T2, and 2m3 for Vtotal in Equation (IV).

P2=0.3724kmol×8.314kPam3/kmolK×329K2m3=509.4kPa

Substitute 4.772kg for mN2, 0.8079kg for mHe, 5kg for mCu, 0.386kJ/kg°C for cv,Cu, 52.5°C for T1,Cu, 5.1926kJ/kg°C for cp,He, 1.039kJ/kg°C for cp,N2, 0.2968kPam3/kgK for RN2, 2.0769kPam3/kgK for RHe, 329K for T2, 353K for T1,N2, 298K for T1,He, 509.4kPa for P2, and 500kPa for P1 in Equation (V).

S˙gen={[4.772kg(1.039kJ/kg°C×ln(329K353K)0.2968kPam3/kgK×ln509.2kPa500kPa)]+[0.8079kg(5.1926kJ/kg°C×ln(329K353K)2.0769kPam3/kgK×ln509.2kPa500kPa)]+5kg×0.386kJ/kg°C×ln(329K325.5K)}=0.03047kJ/K

Substitute 298K for T0 and 0.03047kJ/K for S˙gen in Equation (VI).

X˙dest=(298K)×0.03047kJ/K=9.08kJ

Thus, the amount of wasted work potential for the process is 9.08kJ.

Substitute 4.772kg for mN2, 0.8079kg for mHe, 5kg for mCu, 0.386kJ/kg°C for cv,Cu, 330.2K for T2, 353K for T1,N2, 298K for T1,He, 52.5°C for T1,Cu, 0.743kJ/kg°C for cv,N2, and 3.1156kJ/kg°C for cv,He in Equation (VII).

S˙gen={[4.772kg(0.743kJ/kg°C×ln329K353K)]+[0.8079kg(3.1156kJ/kg°C×ln329K353K)]+5kg×0.386kJ/kg°C×ln(329K325.5K)}=0.02104kJ/K

Substitute 298K for T0 and 0.02104kJ/K for S˙gen in Equation (VI).

X˙dest=(298K)×0.02104kJ/K=6.27kJ

Thus, the amount of wasted work potential for the process when piston is restricted from moving is 6.27kJ.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
A piston-cylinder device contains 1 kg of hydrogen gas at 1600 kPa and 1327°C. Hydrogen gas is now allowed to cool at constant pressure until the temperature drops to 127°C. This is then followed by a second process in which the gas undergoes a constant volume process to a pressure of 400 kPa. In the final process, the gas is compressed in an isothermal process to a pressure of 1000 kPa. Using the gas constant, R of 4.12 kJ/kg.K for hydrogen, i. Determine the volume for all the states (m³) ii. Show and label all the processes on a P-V diagram. iii. Determine the mass of the air in your bedroom (kg). iv. Can the temperature and volume of the air in your bedroom be used to determine all the other properties of the air in your bedroom. Provide a brief explanation for your answer.
A 0.5m³ rigid tank containing hydrogen at 20°C and 600 kPa is connected by a valve to another 0.5m³ rigid tank that holds hydrogen at 30°C and 150 kPa. Now the valve is opened and the system is allowed to reach thermal equilibrium with the surroundings, which are at 15°C. Determine the final pressure in the tank. R of hydrogen is 4125.52 J/kg-K.
A 14-ft3 tank contains oxygen initially at 14.7 psia and 80°F. A paddle wheel within the tank is rotated until the pressure inside rises to 20 psia. During the process 20 Btu of heat is lost to the surroundings. Determine the paddle-wheel work done. Neglect the energy stored in the paddle wheel. The gas constant and molar mass of oxygen are R = 0.3353 psia-ft3/lbm-R and M = 32 lbm/lbmol. The specific heat of oxygen at the average temperature of Tavg = (735+540)/2= 638 R is cv,avg= 0.160 Btu/lbm.R. The paddle-wheel work done is Btu.
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
First Law of Thermodynamics, Basic Introduction - Internal Energy, Heat and Work - Chemistry; Author: The Organic Chemistry Tutor;https://www.youtube.com/watch?v=NyOYW07-L5g;License: Standard youtube license