MET330_Unit 2 Software Problem Assignment 2

Task 1 You are employed as a mechanical engineer within an unnamed research center, specializing in the development of innovative air conditioning systems. Your division is tasked with providing computer-based modeling and design solutions using computational fluid dynamics through ANSYS software. Your primary responsibilities involve the analysis of horizontal channel dynamics to meet specific criteria. Under the guidance of your immediate supervisor, you have been assigned unique responsibilities within an ongoing project. As a member of the research team, your role includes constructing an appropriate model and executing a sequence of simulation iterations to explore and enhance channel performance. Figure 1 provides a visualization of the horizontal channel under consideration. Consider 2D, incompressible, steady flow in a horizontal channel at a Reynolds number of 150. The schematic below illustrates the channel flow, not drawn to scale. For simplicity, neglect gravity. The…

Task 1 You are employed as a mechanical engineer within an unnamed research center, specializing in the development. of innovative air conditioning systems. Your division is tasked with providing computer-based modeling and design solutions using computational fluid dynamics through ANSYS software. Your primary responsibilities. involve the analysis of horizontal channel dynamics to meet specific criteria. Under the guidance of your immediate supervisor, you have been assigned unique responsibilities within an ongoing project. As a member of the research team, your role includes constructing an appropriate model and executing a sequence of simulation. iterations to explore and enhance channel performance. Figure 1 provides a visualization of the horizontal channel under consideration. Consider 2D, incompressible, steady flowin a horizontal channel at a Reynolds number of 150. The schematic below illustrates the channel flow, not drawn to scale. For simplicity, neglect gravity. The…

SUBJECT COURSE: ERGONOMICS REQUIRED: CONCLUSION AND RECOMMENDATION FOR THE FOLLOWING SCENARIO: (should be 2 paragraphs with 7 sentences each) We carried out a lab experiment on the stroop test. According to the results of our analysis using Minitab ANOVA, there was no error made when we were carrying out the task. here are the objectives of the task: Students should be able to: 1. Understand how human brains process information. 2. Demonstrate compatibility and interference issues. 3. Determine how noise or interference affects perception.

Subject  :- Mechanical engineering

Per Bartleby honor code only 3 subparts of a question can be answered per submission. I have submitted 10, 11, 12, and 13 previously. Please answer 14, 15, 16

Department of Mechanical Engineering PRINCIPLES OF COMPUTER AIDED ENGINEERING – MENG303 Please solve the problem by keupordDepartment of Mechanical Engineering PRINCIPLES OF COMPUTER AIDED ENGINEERING – MENG303 Please solve the problem by keupord

Mech. Engg. Dept. 4th year 2022-2023 Solar Energy Spring course MEC364 Dr. Mahmoud U. Jasim Review/Recap Sheet Q1- Answer with true or false and rewrite the false statements completely in correct form, otherwise no mark will be put on the false statements. 1 2 To represent a location on earth surface you need to define its altitude and longitude angles. 3 Solar zenith and solar incidence angles have the same value for horizontal surface. At sunset time the value of solar altitude angle is maximum. 4 The angle which represents the inclination of a given surface is the zenith angle 5 6 7 8 When the absolute value of sun-wall azimuth angle exceeds 90' this means that the sun rays are reaching the receiving plane. The solar irradiance and the solar irradiation have the same physical meaning. In the case of clear sky weather, the beam solar irradiation on a horizontal surface is less than the diffused irradiation. The total solar radiation received by a tilted surface is the same as that…

I need problems 6 and 7 solved.  I got it solved on 2 different occasions and it is not worded correctly. NOTE: Problem 1 is an example of how it should be answered. Below are 2 seperate links to same question asked and once again it was not answered correctly. 1. https://www.bartleby.com/questions-and-answers/it-vivch-print-reading-for-industry-228-class-date-name-review-activity-112-for-each-local-note-or-c/cadc3f7b-2c2f-4471-842b-5a84bf505857 2. https://www.bartleby.com/questions-and-answers/it-vivch-print-reading-for-industry-228-class-date-name-review-activity-112-for-each-local-note-or-c/bd5390f0-3eb6-41ff-81e2-8675809dfab1

What letter choice is for number one

2 and3

Southern Technical University OETC STU Fluid Mechanic/Second Class Basra Technical Collage Thermal Mechanical Engineering Dep. Lecturer/ Farah A. Al-Salam H.W: what is the bulk modulus of elasticity of a liquid which is compressed in a cylinder from a volume 0.0125m' at 80N/cm2 pressure to a volume of 0.0124m' at 150N/cm2 pressure?

Enginooring Mochanics: Sutca (1 Fint Scitester, Firt yoat, Academic yer 2020-2021 Deputtane of Civil Engnoeg Callege of Engincenng Lasenaty ut Mis Cm link on Miodle Instructor: Dr. Murtada Abass Mid-term Examination of E113 1 year 2020-2021 Date: March 5, 2021 Time: 20 Minutes Answer one question only which is assigned for you only Your Question is assigned via Mloodle in Ouizzes Section Your answer to the question will be submitted via Zoom Question: Determine the reactions of the truss shown in the Figure, 5 KN lom A جميلة محمد 15 کشيش lom IDM Page15

1. And 2

Please give me the answers for this i been looking at this for a hour and my head hurts

Help!!! Please answer all Correctly!!! Please

Answer letter C. Thank you

Task 1 You have been moved into the laboratory for the fluid testing for hydraulic devices and a considerable amount of research has been carried out in an attempt to understand the exact nature of the temperature variation of viscosity. Inspect the table given below and note the relative values of viscosity for each Newtonian fluid at a given temperature. Compare the results of a viscosity test and comment on why the viscosity of ethanol and water is considerably lower than motor oil and explain any discrepancies. Temperature [°C] Water (μ) Ethanol (μ) Motor oil (SAE 15W-40) (μ) [mPa s]/ cP [mPa s]/ cP [mPa s]/ cP 10 1.30600 1.4475 582.95 20 1.00160 1.1841 287.23 30 0.79722 0.9764 155.31 40 0.65272 0.8151 91.057 50 0.54650 0.694 57.172 60 0.46602 0.6034 38.071 70 0.40353 0.5231 26.576 80 0.35404 0.01043 19.358 90 0.31417 0.01074 14.588 100 0.28158 0.1104 11.316 To complete this task, it is required to evaluate the effects of shear force on three Newtonian and three non-Newtonian…

Problem 1: You are working in a consulting company that does a lot of hand calculations for designs in Aerospace Industry for mechanical, thermal, and fluidic systems. You took the Virtual engineering course, and you want to convince your boss and the team you work to move to modelling and simulation in computers using a certain software (Ansys, Abaqus, etc). Discuss the benefits and pitfalls of computer based models used within an industrial environment to solve problems in engineering.

I need parts 1, 2, and 3 answered pertaining to the print provided. NOTE: If you refuse to answers all 3 parts and insist on wasting my question, then just leave it for someone else to answer. I've never had an issue until recently one single tutor just refuses to even read the instructions of the question and just denies it for a false reasons or drags on 1 part into multiple parts for no reason.

Please give a complete solution in Handwritten format. Strictly don't use chatgpt,I need correct answer. Engineering dynamics

I Blackboard @ Texas Tech Uni x Bb MasteringEngineering - Spri x E MasteringEngineering Maste X C Suppose That H = 3.8 M . (Fi x X Mathway | Calculus Problem x y! how to take a full page scree A session.masteringengineering.com/myct/itemView?assignmentProblemID=12360392&offset=next ABP O Tp E G KAssignment #3 Fundamental Problem 2.29 5 of 6 > I Review Part A Find the magnitude of the projected component of the force along the pipe AO. (Figure 1) Express your answer to three significant figures and include the appropriate units. µA FAO = Value Units Submit Request Answer Figure 4 m F = 400 N 6 m 5 m B 4 m 10:31 PM O Type here to search 2/7/2021

Drilling and Completion Engineering II An exploration well is to be drilled to a total depth of 19000 ft, relevant data are as follows: Safety factors for collapse and burst are 0.9 and 1.05 respectively. Design suitable casing strings for the given hole sizes, taking into consideration the available casing grades and the maximum expected pressures. The answer by hand written in a clear way

What letter choice is for number eight

b) After leaving CBU you are running company dealing in material design, manufacturing customer has asked your company to test a few samples which you suspect to be mild steel. You have therefore asked your subordinates, technicians, to carry out these tests. Results are as shown in Fig.1. For you to write a report, which is critical if your company has to be paid, explain the following to your customer: and testing. A Curve Y Curve X Stres Fig.1: Stress-strain ourves 1) Material properties labelled A, B, C and D 2) How do you detemine the material's Young's modulus? 3) What's the difference between Curve X and Curve Y? 4) What measurements would you take if you are to determine Poisson's ratio Stress

Help!!! Please answer part B correctly!!! Please

Help!!! Please answer part b correctly like part A. Please!!!!

A Team of Engineers asked for an internal combustion engine to use it in a designed car. Your role is to describe the operation sequence of different types of available engines, explain their mechanical efficiency, and deliver a detailed technical report to show your approach in solving and discussing the following tasks and issues.  You must follow the following steps to help the team:  STEP 1  Describe the operational sequence of four-stroke spark ignition and four-stroke compression ignition engines with the aid of sketches by constructing simple sketch representing the operation and plotting the P-V diagrams for each process during the cycle to show the following:  The input and output heat and net output work The expansion and compression strokes The air-fuel mixture intake and exhaust gasses The spark plug when it is in the active mode The complete cycle of ideal Otto and Diesel cycles that shows the input and output heat and net output work. STEP 2  Explain the mechanical…

You are assigned as the head of the engineering team to work on selecting the right-sized blower that will go on your new line of hybrid vehicles.The fan circulates the warm air on the inside of the windshield to stop condensation of water vapor and allow for maximum visibility during wintertime (see images). You have been provided with some info. and are asked to pick from the bottom table, the right model number(s) that will satisfy the requirement. Your car is equipped with a fan blower setting that allow you to choose between speeds 0, 1,2 and 3. Variation of the convection heat transfer coefficient is dependent upon multiple factors, including the size and the blower configuration.You can only use the following parameters:

1. HI CAN YOU HELP ME WITH MY ASSIGNMENT. PLEASE WRITE IT PROPERLY, DONT WRITE IT.      Faculty members and staff from ABC University had a meeting on how they will conduct the virtual flag ceremony every Monday. There are reported 12 faculty members, 3 office staff, 4 heads from the different courses and 1 student leader attended a secret meeting in a room which is 15 meters wide by 10.5 meters long and a ceiling of 3.87meters. The room is completely sealed off and insulated. Each persons gives off 150kcal per hour of heat and occupies a volume of 0.2 cubic meter. The room has an initial pressure of 14.696psi and temperature of 522.27 Rankine. • Calculate the room temperature after 15.5 minutes In Celcius • What is the mass of air in kilograms

task 4 please

E1 16l| 46l Asiacell ZAIN IQ Y:YAI O Mid-Mechanic.. University of Misan Engineering College Mechanical Engineering Department Subject: Mechanics of Materials Stage: 2d Stage Time: 1.5 hour Date: 25/2/ 2021 Mid Examination/ First Semester Note: The total mark 15 Q1\ A copper bar consists from three sections: sections 1 is of 25 mm diameter and 60 mm long, section 2 is of 15 mm diameter and 50 mm long and section 3 is 20 mm square and 40 mm long. The bar is subjected to an axial tensile load which induces a stress of 20 MN/m? on the smallest cross section. Determine the total increase in the length of the bar when the load is applied. For copper E=100 GN/m?. (Smark) Q2\ A compound bar is formed from copper rod of diameter 30 mm and a coaxial steel tube of cross-sectional area 1500 mm? which are firmly attached at their ends. Determine the stress in the copper and in the steel when the temperature of the bar is dropped by 40°C and a compressive force of 100 kN is applied. For copper, E =…

Case Study – The New Engineer   Jeff was just hired by GSI, Inc. to be their Environmental and Safety Coordinator.  This is Jeff's first position after completing his engineering degree.  He had taken a course in safety engineering as part of his studies and felt confident that he could handle the job.   Management at GSI, Inc. has assured him that they are committed to maintaining a safe workplace.  They have never had an individual dedicated to this task full-time.  They will implement his recommendations if he can justify them.   As Jeff begins to get familiar with the operations, he spends considerable time on the production floor.  He notices workers clean their tools before break with a liquid from an unmarked 55-gallon drum.  They also use this liquid to clean residue from their skin.  They use paper towels to dry their tools and hands, throw these towels in the trash, and head to the break room for a snack and/or smoke.   In talking with the workers, Jeff learns of some of…