Lewis Emma_Pronunciation Assignment 7

I was going over the equations for the notes in class and I had a thought. Based on the equations in the image, you could get negative propellant mass. So, I coded it in matlab and I got negative mass. How is that possible? I think I used practical values for the velocity and mass ratio and so on. Did I do something wrong?

The first photo is the question, where the 2nd shows some problem solving strategies

You are assigned as the head of the engineering team to work on selecting the right-sized blower that will go on your new line of hybrid vehicles.The fan circulates the warm air on the inside of the windshield to stop condensation of water vapor and allow for maximum visibility during wintertime (see images). You have been provided with some info. and are asked to pick from the bottom table, the right model number(s) that will satisfy the requirement. Your car is equipped with a fan blower setting that allow you to choose between speeds 0, 1,2 and 3. Variation of the convection heat transfer coefficient is dependent upon multiple factors, including the size and the blower configuration.You can only use the following parameters:

I need the answers to this part, I have submitted this question three times on this site and all three times received way different answers...as I am unsure which tutor to listen to, I am uploading this question for the third time and I am asking a very highly knowledgable tutor to help me solve this. If you are uncertain, please leave it for another tutor.

Choose the correct answer, please, I need the solution as soon as possible

Please do only C part with breif explanation. I want typed solution. Not hand written

Important instruction: These questions use the last three-digit value (L3D) of individual student matrix numbers. For example, if the matrix number is CD180264 then the L3D value is 264 (since the last three digits is 264). Some data require multiplication of the L3D value, for example, 10(L3D) means 10 x L3D   subject name is INDUSTRIAL ENGINEERING

Don't Use Chat GPT Will Upvote And Give Handwritten Solution Please

Create an illustration or diagram of the amusement park ride called THE BUMPER CAR RIDE, then proceed to add labels based on the guidelines provided within the image. The screenshot is the example of the diagram BUT THAT IS A DIAGRAM OF THE GRAVITRON RIDE. I need an illustration DIAGRAM OF THE BUMPER CAR RIDE, do not answer using AI.

PLEASE: Can you write out the answers. Typing it out doesn't make sense all together

Please do not use Ai . I need correct solution in handwritten format

I drew it but I don't know where I have to connect it. Where do I put dashed lines (if needed) where are the solid lines? Did I do it right?

I need help solving these 3 simple parts, if you can not answer all 3 parts then please leave it for another tutor, thank you.

Matlab code: Read images from a folder with the directory using the MATLAB code. Be specific and don't write general answer.

Q4: Create a Visual Basic Project to find the value of the following series: h? h4 h3 cos(h) = h – 2! 3! 4! Write the code program so that the value of angle (h) is entered into inputbox. Estimate the value of series (cos(h)) so that the absolute value of any term is greater or equal to 10-6. Display the required number of terms (N) which it used in this series in a text box and display the result of series (cos(h)) in another separate text box.

No need guideline answer ok.  Solve both write RRL. ABOUT THESE 2 ITEMS.  NOTE NO NEED EXTRA EXPLANATION ONLY NEED FOR OTH 1 PARAGRAPH EACH PUT REF END POINTS OK. DONT NEED GUIDELINE OKK. IF ANSWER GUIDELINE I WILL DISLIKE OKK 1. height of sweet potato plants; 2. programable  speed of a rover: . something that says that a rover is programmed via speed, that it doesn't matter if the weight of the rover is decreasing from time to time. something that says that if you programmed a rover to go 5kph it will remain 5kph even if you put something heavy on it.

Please draw the right side view.   Don't copy from anywhere else. Please write the dimensions as well.

Help me solve this ENGINEERING GRAPHICS question Use 0.25 cartesian paper or 0.25 Isometric paper please.

I think I drew it wrong but can it please be drawn on the isometric paper on my image!

AutoSave STATICS - Protected View• Saved to this PC - O Search (Alt+Q) Off ERIKA JOY DAILEG EJ File Home Insert Draw Design Layout References Mailings Review View Help Acrobat O Comments E Share PROTECTED VIEW Be careful-files from the Internet can contain viruses. Unless you need to edit, it's safer to stay in Protected View. Enable Editing Situation 9 - A 6-m long ladder weighing 600 N is shown in the Figure. It is required to determine the horizontal for P that must be exerted at point C to prevent the ladder from sliding. The coefficient of friction between the ladder and the surface at A and B is 0.20. 25. Determine the reaction at A. 26. Determine the reaction at B. 27. Determine the required force P. 4.5 m 1.5 m H=0.2 30° Page 5 of 5 671 words D. Focus 100% C ЕPIC GAMES ENG 7:24 pm w US 16/02/2022 IZ

In the automotive industry, supercars are highly accredited with how they are manufacture; from the type of car chassis used to the type of materials employed. Often enough, companies like BMW, Mercedes & Audi produces supercars that exemplifies a better reliability compared to other automotive manufacturing companies. This is because they pay close attention to the details on how the car is manufactured; right from raw materials to a finished supercar. The task given to you is to watch the video link provided below & explain the electrostatic process acquired for the two different models of BMW vehicles. https://www.youtube.com/watch?v=sUqKUbmdOr0 Pls watch the video before answering

I need help solving this problem.

Please make the exact graph that you see in the picture, along with the graph are numbers that are data. Please make the exact graph do not make anything thing different, the blue and orange circles should be there and the lines should be the same including the titles. Please make sure everything is exactly the same. Use MATLAB, and send the code and please make sure no error signs comes up. Take your time please I need help.

Every time I use this code the two lies come up but they keep on showing up separately. I need one line on top of the other or make it look like one line just like it’s shown on the picture I need the two line together and make it one line. If you can please make the lines less curved make it look line the line on the picture. With what I’m asking from you please fix it using this code using MATLAB and send back the code. % Sample data for Diesel and Petrol cars carPosition = linspace(1, 60, 50); % Assumed positions of cars % Fix the random seed for reproducibility rng(45); % Assumed positions of cars CO2Diesel = 25 + 5*cos(carPosition/60*2*pi) + randn(1, 50)*5; % Random data for Diesel CO2Petrol = 20 + 5*sin(carPosition/60*2*pi) + randn(1, 50)*5; % Random data for Petrol % Fit polynomial curves pDiesel = polyfit(carPosition, CO2Diesel, 3); pPetrol = polyfit(carPosition, CO2Petrol, 3); % Generate points for best fit lines fitDiesel = polyval(pDiesel, carPosition); fitPetrol =…

Chrome File Edit View History Bookmarks People Tab Window Help McGraw-Hill Campus - ALEKS Science - CHM1045 GEN CHEM 1 BLENDED 669113 A bconline.broward.edu/d21/le/content/466883/fullscreen/12868783/View McGraw-Hill Campus - ALEKS Science O GASES Interconverting pressure and force A chemistry graduate student is designing a pressure vessel for an experiment. The vessel will contain gases at pressures up to 470.0 MPa. The student's design calls for an observation port on the side of the vessel (see diagram below). The bolts that hold the cover of this port onto the vessel can safely withstand a force of 2.80 MN. pressure vessel bolts side View port Calculate the maximum safe diameter w of the port. Round your answer to the nearest 0.1 cm. O cm Explanation Check O2021 McGraw-Hill Education. All Rights Reserved. Terms of Use FEB

I need this quickly please please please its in mechanical engineering: dynamic please please please i need this

Draw it on the graph provided please!

The Weather Monitor. Your South American expedition splits into two groups: one that stays at home base, and yours that goes off to set up a sensor that will monitor precipitation, temperature, and sunlight through the upcoming winter. The sensor must link up to a central communications system at base camp that simultaneously uploads the data from numerous sensors to a satellite. In order to set up and calibrate the sensor, you will have to communicate with base camp to give them specific location information. Unfortunately, the group's communication and navigation equipment has dwindled to walkie-talkies and a compass due to a river-raft mishap, which means your group must not exceed the range of the walkie-talkies (3.0 miles). However, you do have a laser rangefinder to help you measure distances as you navigate with the compass. After a few hours of hiking, you find the perfect plateau on which to mount the sensor. You have carefully mapped your path from base camp around lakes and…

Need correctly all parts

The class I'm taking is physics for scientists and engineers! **** I need help with part  D only*****  Can you please write out the solution and not type out the solution? I had to reask this question because the last tutor typed out the solution and it was very hard for me to follow . Please and thank you for the special request. I have attached the problem. Please view attachment before answering. Thank you!

There is a small space between the orange and purple line could you please connect the two lines together also can you please make the purple line shorter and then connect the purple line to the orange line, please take out the box that says “Diesel, petrol, Diesel best fit, petrol best fit”. Also when ever I run this code the graph shows up but there are still errors that comes up could you please fix them when you are running this on MATLAB. Please use this code on MATLAB and fix it. % Sample data for Diesel and Petrol cars carPosition = linspace(1, 60, 50); % Assumed positions of cars % Fix the random seed for reproducibility rng(50); % Assumed CO2 emissions for Diesel and Petrol CO2Diesel = 25 + 5*cos(carPosition/60*2*pi) + randn(1, 50)*5; % Random data for Diesel CO2Petrol = 20 + 5*sin(carPosition/60*2*pi) + randn(1, 50)*5; % Random data for Petrol % Fit polynomial curves pDiesel = polyfit(carPosition, CO2Diesel, 3); pPetrol = polyfit(carPosition, CO2Petrol, 3); % Generate…

Document1 - Word File Home Insert Design Layout References Mailings Review View O Tell me what you want to do... Sign in 2 Share X Cut Calibri (Body) - A A 今し P Find - 11 Aa - AaBbCcDc AaBbCcDc AaBbC AABBCCC AaB AaBbCcC AaBbCcD AaBbCcD AaBbCcD AaBbCcDc AaBbCcD AaBbCcD AABBCCD AABBCCDI AaBbCcD Ee Copy ab. Replace Paste B I U - abe x, A - aly - A - 1 Normal 1 No Spac. Heading 1 Heading 2 Title Subtitle Subtle Em. Emphasis Intense E. Strong Quote Intense Q. Subtle Ref.. Intense Re. Book Title x' Format Painter A Select - Clipboard Font Paragraph Styles Editing At a hydraulic plant the propeller type turbine are rated at 48,000 HP at 82 rpm under a 14 meters head, the diameter is 7 meters, for a geometrical similar turbine to develop 36,000 HP under a 11 meters head. After resolving the percentage change in probable flow, determine the following: What diameter, in meter, of the impeller to be used? O 70.00 O 22.86 O 40.00 O 7.25 O 13.06 What is the speed, in RPM, should be used? O 40.00 O…

You are a biomedical engineer working for a small orthopaedic firm that fabricates rectangular shaped fracture fixation plates from titanium alloy (model = "Ti Fix-It") materials. A recent clinical report documents some problems with the plates implanted into fractured limbs. Specifically, some plates have become permanently bent while patients are in rehab and doing partial weight bearing activities. Your boss asks you to review the technical report that was generated by the previous test engineer (whose job you now have!) and used to verify the design. The brief report states the following... "Ti Fix-It plates were manufactured from Ti-6Al-4V (grade 5) and machined into solid 150 mm long beams with a 4 mm thick and 15 mm wide cross section. Each Ti Fix-It plate was loaded in equilibrium in a 4-point bending test (set-up configuration is provided in drawing below), with an applied load of 1000N. The maximum stress in this set-up was less than the yield stress for the Ti-6Al-4V…

reply fast