1-A 4 pole shunt generator with wave-wound armature has 41 slots, each having 12 conductors. The armature resistance is 0.05 Q and shunt field resistance is 200 0. The flux per pole is 25mWb. If a load resistance 10 0 is connected across the armature terminals, calculate the voltage across the load when generator is driven at 1000 r.p.m

1-A 4 pole shunt generator with wave-wound armature has 41 slots, each having 12 conductors. The armature resistance is 0.05 Q and shunt field resistance is 200 0. The flux per pole is 25mWb. If a load resistance 10 0 is connected across the armature terminals, calculate the voltage across the load when generator is driven at 1000 r.p.m

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter12: Power System Controls

Section: Chapter Questions

Problem 12.11P

See similar textbooks

Similar questions

A 220V short-shunt compound generator has armature resistance, series field resistance and shunt field resistances of 0.6, 0.44 and 300 - 16 respectively. If the generator supplies a 10+16 kW load at a rated voltage, find the induced voltage in the armature. Ignore armature reaction. Find the efficiency if the mech and core loss is 500W
A shunt generator supplies a 31kW load at 230V through cables of resistance, R = 122mΩ. If the field winding resistance, Rf =50Ω and the armature resistance, Ra =51mΩ. Determine the following below: The terminal voltage is, Answer and unit for part 1 The e.m.f. generated in the armature is,
A 3 phase 4MVA, 12 kV star connected synchronous generator has Zs= 0.8+J30 ohm. Using circle diagram only, find: 1. The output power developed at unity power factor with excitation equal to 1.25 of rated voltage. 2. The load angle and power factor if the generator supplies (1500 KW) at rated voltage and excitation lequal to (1.2) of rated voltage. 3. Repeat part (2) when .armature resistance is neglected
A short shunt compound generator has an armature; series field and shunt field resistances of 0.031Ω, 0.04Ω and 100Ω respectively. At rated load condition, the terminal voltage is 400V while the armature is developing an emf of 409V. Find the kW delivered to the load at rated condition.
A separately excited generator has no-load voltage of 125V. A certain load rated at 1200W, 120V is then connected at the terminal. Calculate the series resistance needed to connect to the armature circuit in order for the load to operate at rated condition if the armature resistance is 0.0692Ω.
A long-shunt compound d.c. generator with armature, series field and shunt field resistance of 0.5, 0.4 and 250 Ω respectively gave the following readings when run at constant speed : Load current (A) : 0 10 20 30 40Terminal p.d. (V) : 480 478 475 471 467 Plot the curve of internal generated e.m.f. against load current. Explain fully the steps by which this curve is obtained and tabulate the values from which it is plotted.
A long shunt cumulative compound dc generator delivers a load current of 60A at 440V. The shunt field resistance , series field resistance and armature resistance are 80, 0.9 and 0.4 respectively. Calculate the induced emf and load resistance.
Q2)A. Explain compound DC generator, also describe its types and terminal characteristics of compound DC generator. proper explanation and diagram
A shunt generator supplies a 30kW load at 215V through cables of resistance, R = 110mn. If the field winding resistance, Rf =680 and the armature resistance, Ra =45mn. Determine the following below: The terminal voltage is, The e.m.f. generated in the armature is,
A 3 phase, star connected synchronous generator supplies current of 10A having phase angle of 20º lagging at 400V. Find the load angle and the components of armature current Id and Iq if Xd = 10 ohm and Xq = 6.5 ohm Assume armature resistances to be negligible
A 10 kW shunt generator having an armature circuit resistance of 0.75 ohm and a field resistance of 125 ohm, generates a terminal voltage of 250V at full load. Determine the efficiency of the generator at full load, assuming the iron, friction and windage losses amount to 600W.
The output of a shunt generator is 66 A at 100 volts. Armature and field resistances are, respectively, 0.04 ohm and 25 ohms. If the efficiency at this load is 88%, determine the core and friction losses