A chromatographic analysis is performed with a sample containing toluene and benzene. The column length was 25 m and the flow rate 45 mL/min. Solute tr air 1.75 benzene (A) 7.00 1.85 toluene (B) 16.10 1.65 Calculate the theoretical plate height for each peak. Benzene: 109 mm/plate and Toluene 16 mm/plate Benzene: 105 mm/plate and Toluene 49.7 mm/plate Benzene: 172 mm/plate and Toluene 175 mm/plate Benzene: 119 mm/plate and Toluene 181 mm/plate

A chromatographic analysis is performed with a sample containing toluene and benzene. The column length was 25 m and the flow rate 45 mL/min. Solute tr air 1.75 benzene (A) 7.00 1.85 toluene (B) 16.10 1.65 Calculate the theoretical plate height for each peak. Benzene: 109 mm/plate and Toluene 16 mm/plate Benzene: 105 mm/plate and Toluene 49.7 mm/plate Benzene: 172 mm/plate and Toluene 175 mm/plate Benzene: 119 mm/plate and Toluene 181 mm/plate

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

4. The paper chromatogram of an unknown mixture is shown below: final solvent level 5.3 ст 6.0 cm B 2.0 cm A 1.0 cm origin A. Using the measured distances find the retention factor of components A, B, and C. B. If the paper was run using hexane as the solvent, (a) which compound is the most polar? (b) the least polar? Explain your answer. C. What would you expect to happen to the Rf values if acetone was used instead of hexane as the solvent?
6. The concentration of caffeine in an energy soft drink was determined by standard addition using HPLC. The following procedure was used: a standard caffeine solution was prepared by adding 0.09850g of caffeine to 25.0 cm3 of water.A series of solutions were prepared by adding known volumes of the standard solution to the soft drink before diluting to 100 cm3. The volume of standard and the caffeine peak area are shown in the table: Energy Drink (cm3) Added caffeine Std (cm3) Peak area 15 0 965 15 5 1352 15 10 1739 15 15 2126 15 20 2513 Determine the concentration of caffeine in the soft drink as mg cm-3. A. 3.3 B. 2.3 C. 4.3 D. 7.3
A new method is proposed to simultaneously detectand separatefour foodadditives by reversed-phase liquid chromatography. The data were obtained using theliquid chromatographic column with a flow rate of 0.5 mL per min and with the followingparameters: Pore size 100 A Particle Size 3.5 Internal diameter 4.6 mm Length 150 mm The food additives found in the sample resulted in the following data: ( see image for table) a.Calculate the number of plates from each peak. b.Calculate the plate height for the column. c.Retention factor for each peak.
please help me find average and standard deviation
I have set up my spreadsheet and was able to reproduce the result with a pKa of 4.64. TRUE OR FALSE
Chromatographic analysis using gas-liquid chromatography with a 40-cm packed column gave the following data: retention time, Compound width, min min Air 1.9 C7H14 (a 10.0 0.76 cycloalkane) C7H12 (a 10.9 0.82 cycloalkene) Toluene 13.4 1.00 Determine the average number of plates. 2014.678 2718.045 3098.354 None of the above
A chromatographic column was found to have the following constants: A= 0.01 cm, B= 0.30 cmis and C=0.015s. What are the optimum flow rate? A none of the choices Bp-15 cmis p-45 cm/s D u-3.6 cmis E-26 cm/s
Chloroform is an internal standard in the determination of the pesticide DDT in a polarographic analysis in which each compound is reduced at an electrode surface. A mixture containing 0.500 mM chloroform and 0.800 mM DDT gave signals of 15.3 µA for chloroform and 10.1 µA for DDT. An unknown solution (10.00 mL) containing DDT was placed in a 100-ml volumetric flask and 10.2 ul of chloroform (MW = 119.39, density = 1.484 g/mL) were added. After dilution to the mark with solvent, polarographic signals of 29.4 and 8.7 µA were observed for the chloroform and DDT, respectively. Find the concentration of DDT in the unknown.
Find the mean sand standard deviation of each sample.
The results in the table below were obtained from the analyses of Mg2+ content in an orange juice sample using a flame-AAS. Based on these results answer the following questions: (i) (ii) Replicate 1 2 3 4 Mg²+(ppm) 7.08 7.21 7.12 7.09 Calculate the mean, standard deviation and coefficient of variation (or %RSD) for the results obtained. If the certified value of the Mg2+ content of the apple juice sample is 7.45 ppm. What is the percentage of recovery for this analysis?
The data in the following table were extracted from a gas chromatographic analysis of a two- component mixture. Air nonane decane Retention time (s) 5 26 32 Peak width, baseline (s) 5 4 (i) Calculate the capacity factor, k, for the two compounds. (ii) Calculate the selectivity factor, a, for the two compounds.
Plot a professional quality standard curve (absorbance vs. protein amount in µg) with an appropriate title and caption underneath the plot from the data give above. The caption should include the best-fit data.