An amino acid of interest was produced in a fed-batch culture using glucose in the feed medium. The initial volume of the quasi-steady-state culture was V0= 500 L, and the nutrient solution containing glucose was added at a constant flow rate of F = 50 L/h. Data: X0 (at the beginning of feeding) = 20 g/L, S0 = 300 g/L, max = 0.2 h-1, KS = 0.5 g/L and Y x/s= 0.3 g/g a) Determine the volume of the culture at t = 10h b) Determine the concentration of glucose at t = 10 h c) determine the concentration and total mass of cells at t = 10 h d) If product is associated with growth with α = 1.5 and P0 = 0.1 g/L, determine the concentration of product at t = 10h.

An amino acid of interest was produced in a fed-batch culture using glucose in the feed medium. The initial volume of the quasi-steady-state culture was V0= 500 L, and the nutrient solution containing glucose was added at a constant flow rate of F = 50 L/h. Data: X0 (at the beginning of feeding) = 20 g/L, S0 = 300 g/L, max = 0.2 h-1, KS = 0.5 g/L and Y x/s= 0.3 g/g a) Determine the volume of the culture at t = 10h b) Determine the concentration of glucose at t = 10 h c) determine the concentration and total mass of cells at t = 10 h d) If product is associated with growth with α = 1.5 and P0 = 0.1 g/L, determine the concentration of product at t = 10h.

Curren'S Math For Meds: Dosages & Sol

11th Edition

ISBN:9781305143531

Author:CURREN

Publisher:CURREN

Chapter9: Parenteral Medication Labels And Dosage Calculation

Section: Chapter Questions

Problem 1.2P

See similar textbooks

Similar questions

Five dialysis bags, impermeable to sucrose, were filled with various concentrations of sucrose and then placed in separate beakers containing an initial concentration of 0.6 M sucrose solution. At 10 minute intervals, the bags were weighed and the percent change in mass of each bag was graphed. Which line represents the bag that contained a solution isotonic to the 0.6 M solution at the beginning of the experiment? Which line represents the bag with the highest initial concentration of sucrose? Which line or lines represent bags that contain a solution that is still hypertonic at the end of 60 minutes? What is the best explanation for the shape of line e. after 50 minutes?
Assume that you are adding 300 microliters of 1% substrate solution per well in a 24-well plate. If we can order 5 milligrams of fibronectin for $871.00, how much would it cost to have enough to use every well of the 24-well culture plate?
volume of the quasi-steady-state culture was V0= 500 L, and the nutrient solution containing glucose was added at a constant flow rate of F = 50 L/h.Data: X0 (at the beginning of feeding) = 20 g/L, S0 = 300 g/L, max = 0.2 h-1, KS = 0.5 g/L and Y x/s= 0.3 g/g a) Determine the volume of the culture at t = 10hb) Determine the concentration of glucose at t = 10 hc) determine the concentration and total mass of cells at t = 10 hd) If product is associated with growth with α = 1.5 and P0 = 0.1 g/L, determine the concentration of product at t = 10h. (answer:P = 67,55 g/L)
How would you make two-fold serial dilutions such that the last tube is a 1:32 dilution of the original, concentrated material? Assume that you need to have at least 500 µl of each dilution, and you should be able to perform the dilutions in microfuge tubes with a maximum capacity of 1.5 ml.
During cell couting, when the data are plotted in an ordinary graph or on a cross-section paper, why is the log value of the cell concentration used?
For an exponentially growing culture that increases from 5 *106cells/ml to 5 * 108cells/ml in 8 h, calculate g, n, and k forthis culture.
A gel filtration column was calibrated by measuring elution volumes for two proteins of known mass: glutamate dehydrogenase, 290 kDa with elution volume 20.8 mL; serum albumin, 37 kDa with elution volume 42.5 mL Use these values to determine the equation of the straight line graph that relates log molar mass to elution volume. The elution volume of an unknown protein was 32.2 mL. Use the equation just determined above to estimate the molar mass of the protein in kDa units. Don't round your answer until the end to ensure your answer is within the accepted range. Round your answer to the nearest whole number (e.g. If you calculated 27.52, input your answer as 28).
In this experiment, a culture was serially diluted to the concentrations below. Each plate was plated with 0.25mL of the dilution. Using the most diluted plate, what is the correct concentration of the original culture? A) 2.0 X 10^-3 cells/mL B) 2.0 X 10^5 cells/mL C) 4.0 X 10^5 cells/mL D) 5.0 X 10^4 cells/mL
Consider the sterilization of a sodium gluconate production medium in the holding section of a continuous sterilizer. Assuming constant temperature, the specific death rate constant of the contaminant is 20 s-1 . If the average residence time in the holding section is 10 seconds, calculate the Del factor for the following and explain the results. i. For Pe = 400 ii. For Pe = 400, assuming plug flow iii. For Pe = 100 iv. For Pe = 100, assuming plug flow
Using a P-1000 micropipette, you transfer 800 microliter of ddH2O to a beaker and measure its weight. It turns out to be only 780 milligram; what is the percent error of this micropipette?
How do you calculate the initial concentration of a sample? How would you make a 1:10 dilution of a broth culture if the final volume of the dilution is 10 ml? How much broth, and how much diluent, would you add? If you made a series of tenfold dilutions, exactly the same way as you described in question 1, what would be the dilution factor in the fifth tube? The following are errors that people commonly make when they perform serial dilutions. Indicate whether you think that the number of cfu/ ml calculated would be too high or too low if you make this mistake. You intend to add 0.9 ml of diluent to each tube and 0.1 ml of culture. Instead, you add 0.5 ml of diluent to each tube and 0.1 ml of culture to the first tube. Then, you make a serial dilution of 0.1 ml into and from each tube as described. You prepare 0.9 ml of diluents in each tube. You add 0.1 ml of culture (from the overnight culture provided) to every tube. You add 0.9 ml of diluent to each tube. You add 0.1 ml of…
50 g of food is homogenized in 450 mL of water. From this, 1 mL is added to 29 mL of water, and then a 1:90 dilution is made from this, and then 1 mL from this is added to 99 mL of water, and then 100 uL of this last dilution is plated and after incubation 164 colonies are counted.a) What was the overall dilution factor?b) What was the total CFU/g of the original sample?