Pls answer this question with solutions. In 20x1, LUMINOUS SHINING Co. recalled a product due to a possible defect caused by malfunctioning factory equipment. The products recalled will be repaired free of charge. LUMINOUS is uncertain whether all products recalled will have the possible defect. However, the following estimate was made by LUMINOUS’s engineers and managerial accountants and approved by the board of directors. Repair cost Probability 80,000,000 5% 60,000,000 20% 40,000,000 35% 20,000,000 40% 100% How much is the provision to be recognized? a. 38Mc. 48Mb. 50Md. 32M
Q: Roses and Thorns Inc. involved in selling chocolate bar. During 2016, 100,000 bars were sold for a u...
A: Degree of operating leverage = Contribution margin / Earnings before interest and taxes where, Cont...
Q: Which is not a step in analyzing the cost driver for manufacturing overhead?A. identify the costB. i...
A: All indirect expenses involved during in the manufacturing process are referred to as manufacturing ...
Q: Exclusive Souvenirs Hut does customize, hand-crafted memorabilia for hotels, in which each batch of ...
A: Job costing is customer specific and is used when heterogeneous products are manufactured
Q: Discuss how the lease liability would be measured at lease inception.
A: Lease Liability is the present value of the financial obligation of the lease for the lease payments...
Q: For the coming year, Cleves Company anticipates a unit selling price of $80, a unit variable cost of...
A: Formula: Break even sales units = Fixed cost / unit Contribution margin
Q: equired: 1. Set up a Chart using the table below. 2. Record the January 1 balances immediately under...
A: An accounting equation is a mathematical equation showing assets and liabilities. The total of asset...
Q: Shamrock Windows manufactures and sells custom storm windows for three-season porches. Shamrock also...
A: Find the due amount customer purchase price=2370 payment made on sept.1.2020=1920 balance paid on 15...
Q: Presented here are summarized data from the balance sheets and income statements of Wiper Inc.: Dear...
A: Earnings per share = earnings afte tax/ number of shares outstanding 2020 ($in million 2...
Q:
A: Purchase price of Equipment: $4.2million Useful life: 6years. Residual value $341 thousand a) Depr...
Q: Francis Company has 24,000 shares of common stock outstanding at the begining of 2019. Francis issue...
A: 1. Calculation of weighted average number of outstanding shares as,
Q: On January 1, 2020, Nun Company had ordinary and preference shares outstanding. The incorporators or...
A: Dividends: Dividends are provided by the company to their investors in respect of the shares acquire...
Q: Identify the applicable qualitative characteristics referred to in the Conceptual Framework for Fina...
A: Facts in the given question are mentioned below: Profits are based on Director's Bonuses. Their mai...
Q: On September 1, Jerry's Lighting purchased merchandise with a list price of $12,500 with credit term...
A: Total amount paid = Net Purchase - discount amount where, Net Purchase = list price - purchase retur...
Q: Project L requires an initial outlay at t = 0 of $35,000, its expected cash inflows are $8,000 per y...
A: Answer:
Q: The schedule presents the trial balance for MM Cafe at the end of the fiscal year. The following inf...
A: Adjusting entries are prepared by management to ensure the accrual basis accounting system. It is pr...
Q: ayroll expense will usually Multiple Choice a)be more than the cash amount paid to an employee ...
A: Solution: Payroll expense consist of employee gross pay and employer's statutory contributions. Howe...
Q: (a) What are long-term liabilities? Give three examples. (b) What is a bond?
A: Liability seems to be a debt owing by one firm to an individual or company who is not the owner of t...
Q: Pens and Prints manufactures and sells T-shirts imprinted with college names and slogans. Last year,...
A: Solution: Last year contribution margin per unit = $7.50 - $2.25 = $5.25 per unit Before tax net inc...
Q: A review of the accounting records of Baird Manufacturing indicated that the compan the month of Mar...
A: In this question, we have to find out the amount of payroll cost in SG&A , and cost of goods sol...
Q: Nevada Corporation has 53,200 shares of $18 par stock outstanding that has a current market value of...
A: Introduction: Stock Split: Stock split means splitting of its share face value in to parts. Before a...
Q: Which of the following decisions do NOT influence the cash from operating activities slide? Which s...
A: Operating Activities are company core business activities such as manufacturing , distributing , mar...
Q: Which one of the following statements correctly describes a characteristic of an entity purchase agr...
A: In this question we will explain that which is the correct option or a suitable characteristic of a...
Q: Which of the following is true? a. A credit entry will increase a long-term loan A credit entry wi...
A: Answer) Rules of Accounting: Debit Increases all Assets, Expenses, Losses and Drawings. Credit Incr...
Q: Received a statement of account for the services Delgado, for drafting and filing the Articles of In...
A: These are the accounting transactions that are having a monetary impact on the financial statement o...
Q: describing a Limited Liability Partnership in which would be involved in. Indicate specific provisi...
A: This is theory based question and we explain here Limited Liability Partnership in which would be in...
Q: On January 1, 2020, Nun Company had ordinary and preference shares outstanding, The incorporators or...
A:
Q: On October 1, Jerry's Lighting purchased merchandise with a list price of $8,700 with credit terms o...
A: Total amount paid = Net Purchase - discount amount where, Net Purchase = list price - purchase retur...
Q: Last period Hartig Corporation soid 40.000 units, total sales were $303.000, total variabie expenses...
A: Formula: Contribution margin ratio = ( Contribution margin / Total sales ) x 100
Q: Krueger Corporation manufactures a single product whose selling price is $134 per unit and whose var...
A: Formula: Contribution margin = Sales - variable cost
Q: A donated fixed asset （from a governmental unit) for which the fair value has been determined should...
A: The resources that a firm employs in its commercial activities are referred to as assets. A donated ...
Q: 9. The Standard requires every stock corporation to disclose the amount of unrestricted retained ear...
A: Retained earnings is the company's Cumulative earnings of net profit and held for future use. Retain...
Q: a. By what percentage amount did the exchange rate between the yuan and dollar change from January 1...
A: In the international market, exchange rates between currencies hold an important value. The exchange...
Q: A company had net income of $282,000. Depreciation expense is $26,000. During the year, accounts rec...
A: Introduction: Statement of cash flows: All cash in and out flows are shown in cash flow statements. ...
Q: unrealized gain or loss?
A: During 2020 , Boston Company purchased marketable securities as a trading investment. At the end of ...
Q: Enterprise X manufactures pianos in Malaysia. Enterprise Y distributes these from Hong Kong. Both X ...
A: 1. Explain meaning of associated enterprises? According to Sec 92A of Income Tax Act, an associate...
Q: Which of these statements is not one of the financial statements?A. income statementB. balance sheet...
A: The financial statement, often known as the final account, depicts the organization's financial perf...
Q: In January direct labor was 40% of conversion cost. If the manufacturing overhead cost for the month...
A: Conversion costs= Direct Labor + Manufacturing Overheads.
Q: Calculate the amount of discount paid. Ordinary EOM ROG
A: Discount is the amount of money which a buyer gets from the purchases which has been made by him or ...
Q: A. G Company manufactures two products: Product S and Product T. During January, 50 units of Product...
A: Lets understand the basics. For calculating overhead rate, we will need to use below formula. Overhe...
Q: On March 12, Medical Waste Services provides services on account to Grace Hospital for $10,700, term...
A: Introduction: Journals: Recording of a business transactions in a chronological order. First step in...
Q: Monona Company reported net income of $29,975 for 2019. During all of 2019, Monona had 1,000 shares ...
A: Earnings per share refer to the amount that is earned by the stockholders on every share held by the...
Q: Two transactions are recorded incorrectly in a worksheet. The fi rst error is a transaction of $1000...
A: Accounting Equation :- Assets = Liabilities + Owner's equity It means total of assets is equal to ...
Q: Your client has made all of the following transfers. Which of these transfers will be excluded from ...
A: Solution Gift tax Means If the total value of money received by an individual during a financial ye...
Q: Maple Enterprises sells a single product with a selling price of $75 and variable costs per unit of ...
A: I am answering the first three sub-parts of the question as per bartleby guidelines. Please re-submi...
Q: A company purchased a computer system on January 1,2021 for S1,600,00 and sold it one year later on ...
A: Formula: Straight line method depreciation: = ( Asset cost - Salvage value ) / Useful life
Q: Why is the power to tax is something called something the power destroy
A: The Government run but it is the people who pay the Taxes and who elect the government to run the c...
Q: 7. Refer to the problem below and compute for the Shareholder's Equity at December 31, 2021. * The c...
A: Calculation of shareholders equity. Adjustment a):- Preference retired- 4000*280= 1,120,000. Rem...
Q: Helsinki Inc. produces premium bottled water. Helsinki purchases artesian water, stores the water in...
A: Costing Techniques: Costing Techniques are those methods which enable a production firm to know abou...
Q: ABD Company manufactures wooden rocking chairs. ABD identified the following three material costs in...
A: Indirect material cost is the cost of materials used in production that is not directly traceable to...
Q: Ali Baba Company uses the perpetual inventory system and the FIFO method. The following information ...
A: Under Perpetual Inventory system cost of goods sold is recorded as when the goods are sold , thus th...
Step by step
Solved in 2 steps
- Feinan Sports, Inc., manufactures sporting equipment, including weight-lifting gloves. A national sporting goods chain recently submitted a special order for 4,600 pairs of weight-lifting gloves. Feinan Sports was not operating at capacity and could use the extra business. Unfortunately, the orders offering price of 12.80 per pair was below the cost to produce them. The controller was opposed to taking a loss on the deal. However, the personnel manager argued in favor of accepting the order even though a loss would be incurred; it would avoid the problem of layoffs and would help maintain the community image of the company. The full cost to produce a pair of weight-lifting gloves is presented below. No variable selling or administrative expenses would be associated with the order. Non-unit-level activity costs are a small percentage of total costs and are therefore not considered. Required: 1. Assume that the company would accept the order only if it increased total profits. Should the company accept or reject the order? Provide supporting computations. 2. Suppose that Feinan Sports has negotiated with the potential customer, and has determined that it can substitute cheaper materials, reducing direct materials cost by 0.95 per unit. In addition, the companys engineers have found a way to reduce direct labor cost by 0.50 per unit. Should the company accept or reject the order? Provide supporting computations. 3. Consider the personnel managers concerns. Discuss the merits of accepting the order even if it decreases total profits.Nabors Company had actual quality costs for the year ended June 30, 20x5, as given below. At the zero-defect state, Nabors expects to spend 375,000 on quality engineering, 75,000 on vendor certification, and 50,000 on packaging inspection. Assume sales to be 25,000,000. Required: 1. Prepare a long-range performance report for 20x5. What does this report tell the management of Nabors? 2. Explain why quality costs still are present for the zero-defect state. 3. What if Nabors achieves the zero-defect state reflected in the report? What are some of the implications of this achievement?Defective work Herbert Electronics manufactures an integrated transistor circuit board for repeat customers but also accepts special orders for the same product. Job No. JM4 incurred the following unit costs for 1,000 circuit boards manufactured: When the completed products were tested, 50 circuit boards were found to be defective. The costs per unit of correcting the defects follow: Record the journal entry for the costs to correct the defective work: a. If the cost of the defective work is charged to factory overhead. b. If the cost of the defective work is charged to the specific job.
- Boston Executive. Inc., produces executive limousines and currently manufactures the mini-bar inset at these costs: The company received an offer from Elite Mini-Bars to produce the insets for $2,100 per Unit and supply 1,000 mini-bars for the coming years estimated production. If the company accepts this offer and shuts down production of this part of the business, production workers and supervisors will be reassigned to other areas. Assume that for the short-term decision-making process demonstrated in this problem, the companys total labor costs (direct labor and supervisor salaries) will remain the same if the bar inserts are purchased. The specialized equipment cannot be used and has no market value. However, the space occupied by the mini bar production can be used by a different production group that will lease it for $55,000 per year. Should the company make or buy the mini-bar insert?At the beginning of the last quarter of 20x1, Youngston, Inc., a consumer products firm, hired Maria Carrillo to take over one of its divisions. The division manufactured small home appliances and was struggling to survive in a very competitive market. Maria immediately requested a projected income statement for 20x1. In response, the controller provided the following statement: After some investigation, Maria soon realized that the products being produced had a serious problem with quality. She once again requested a special study by the controllers office to supply a report on the level of quality costs. By the middle of November, Maria received the following report from the controller: Maria was surprised at the level of quality costs. They represented 30 percent of sales, which was certainly excessive. She knew that the division had to produce high-quality products to survive. The number of defective units produced needed to be reduced dramatically. Thus, Maria decided to pursue a quality-driven turnaround strategy. Revenue growth and cost reduction could both be achieved if quality could be improved. By growing revenues and decreasing costs, profitability could be increased. After meeting with the managers of production, marketing, purchasing, and human resources, Maria made the following decisions, effective immediately (end of November 20x1): a. More will be invested in employee training. Workers will be trained to detect quality problems and empowered to make improvements. Workers will be allowed a bonus of 10 percent of any cost savings produced by their suggested improvements. b. Two design engineers will be hired immediately, with expectations of hiring one or two more within a year. These engineers will be in charge of redesigning processes and products with the objective of improving quality. They will also be given the responsibility of working with selected suppliers to help improve the quality of their products and processes. Design engineers were considered a strategic necessity. c. Implement a new process: evaluation and selection of suppliers. This new process has the objective of selecting a group of suppliers that are willing and capable of providing nondefective components. d. Effective immediately, the division will begin inspecting purchased components. According to production, many of the quality problems are caused by defective components purchased from outside suppliers. Incoming inspection is viewed as a transitional activity. Once the division has developed a group of suppliers capable of delivering nondefective components, this activity will be eliminated. e. Within three years, the goal is to produce products with a defect rate less than 0.10 percent. By reducing the defect rate to this level, marketing is confident that market share will increase by at least 50 percent (as a consequence of increased customer satisfaction). Products with better quality will help establish an improved product image and reputation, allowing the division to capture new customers and increase market share. f. Accounting will be given the charge to install a quality information reporting system. Daily reports on operational quality data (e.g., percentage of defective units), weekly updates of trend graphs (posted throughout the division), and quarterly cost reports are the types of information required. g. To help direct the improvements in quality activities, kaizen costing is to be implemented. For example, for the year 20x1, a kaizen standard of 6 percent of the selling price per unit was set for rework costs, a 25 percent reduction from the current actual cost. To ensure that the quality improvements were directed and translated into concrete financial outcomes, Maria also began to implement a Balanced Scorecard for the division. By the end of 20x2, progress was being made. Sales had increased to 26,000,000, and the kaizen improvements were meeting or beating expectations. For example, rework costs had dropped to 1,500,000. At the end of 20x3, two years after the turnaround quality strategy was implemented, Maria received the following quality cost report: Maria also received an income statement for 20x3: Maria was pleased with the outcomes. Revenues had grown, and costs had been reduced by at least as much as she had projected for the two-year period. Growth next year should be even greater as she was beginning to observe a favorable effect from the higher-quality products. Also, further quality cost reductions should materialize as incoming inspections were showing much higher-quality purchased components. Required: 1. Identify the strategic objectives, classified by the Balanced Scorecard perspective. Next, suggest measures for each objective. 2. Using the results from Requirement 1, describe Marias strategy using a series of if-then statements. Next, prepare a strategy map. 3. Explain how you would evaluate the success of the quality-driven turnaround strategy. What additional information would you like to have for this evaluation? 4. Explain why Maria felt that the Balanced Scorecard would increase the likelihood that the turnaround strategy would actually produce good financial outcomes. 5. Advise Maria on how to encourage her employees to align their actions and behavior with the turnaround strategy.Lloyd Industries manufactures electrical equipment from specifications received from customers. Job X10 was for 1,000 motors to be used in a specially designed electrical complex. The followingcosts were determined for each motor: At final inspection, Lloyd discovered that 33 motors did not meet the exacting specifications established by the customer. Anexamination indicated that 18 motors were beyond repair andshould be sold as spoiled goods for 75 each. The remaining15 motors, though defective, could be reconditioned as first-qualityunits by the addition of 1,650 for materials, 1,500 for labor, and1,200 for factory overhead. Required: Prepare the journal entries to record the following: 1. The scrapping of the 18 motors, with the income from spoiledgoods treated as a reduction in the manufacturing cost of thespecific job. 2. The correction of the 15 defective motors, with the additionalcost charged to the specific job. 3. The additional cost of replacing the 18 spoiled motors with newmotors. 4. The sale of the spoiled motors for 75 each. 5. If the reconditioned motors sell for 400 each, is Lloyd betteroff reconditioning the defective motors or selling them as isfor 75 as spoiled goods?
- In 20x5, Major Company initiated a full-scale, quality improvement program. At the end of the year, Jack Aldredge, the president, noted with some satisfaction that the defects per unit of product had dropped significantly compared to the prior year. He was also pleased that relationships with suppliers had improved and defective materials had declined. The new quality training program was also well accepted by employees. Of most interest to the president, however, was the impact of the quality improvements on profitability. To help assess the dollar impact of the quality improvements, the actual sales and the actual quality costs for 20x4 and 20x5 are as follows by quality category: All prevention costs are fixed (by discretion). Assume all other quality costs are unit-level variable. Required: 1. Compute the relative distribution of quality costs for each year and prepare a pie chart. Do you believe that the company is moving in the right direction in terms of the balance among the quality cost categories? Explain. 2. Prepare a one-year trend performance report for 20x5 (compare the actual costs of 20x5 with those of 20x4, adjusted for differences in sales volume). How much have profits increased because of the quality improvements made by Major Company? 3. Estimate the additional improvement in profits if Major Company ultimately reduces its quality costs to 2.5 percent of sales revenues (assume sales of 10 million).Walloon Company produced 150 defective units last month at a unit manufacturing cost of 30. The defective units were discovered before leaving the plant. Walloon can sell them as is for 20 or can rework them at a cost of 15 and sell them at the regular price of 50. What is the total relevant cost of reworking the defective units? a. 2,250 b. 3,000 c. 4,500 d. 6,750Trifecta Distributors has decided to discontinue manufacturing its X Plus model. Currently, the company has 4,600 partially completed X Plus models on hand. The government has put a recall on a particular part in the X Plus model, so each base model must now be reworked to accommodate the style of the new part. The company has spent $110 per unit to manufacture these X Plus models to their current state. Reworking each X Plus model will cost $20 for materials and $20 for direct labor. In addition, $7 of variable overhead and $32 of allocated fixed overhead (relating primarily to depreciation of plant and equipment) will be allocated per unit. Il Trifecta completes the X Plus models, it can sell them for $160 per unit. On the other hand, another manufacturer is interested in purchasing the partially completed units for $104 each and converting them into Z Plus models. Prepare a differential analysis per unit to determine if Trifecta should complete the X Plus models or sell them in their current state.
- Regal Executive, Inc., produces executive motor coaches and currently manufactures the cent awnings that accompany them at these costs: The company received an offer from Saied Tents to produce the awnings for $3,200 per unit and supply 1,000 awnings for the coming years estimated production. If the company accepts this offer and shuts down production of this part of the business, production workers and supervisors will be reassigned to other areas. Assume that for the short-term decision-making process demonstrated in this problem, the companys total labor costs (direct labor and supervisor salaries) will remain the same if the bar inserts are purchased. The specialized equipment cannot be used and has no market value. However, the space occupied by the awning production can be used by a different production group that will lease it for $60,000 per year. Should the company make or buy the awnings?One of the tennis rackets that Ace Sporting Goods manufactures is a titanium model (Slam) that sells for 149. The cost of each Slam consists of: Job 100 produced 100 Slams, of which six were spoiled and classified as seconds. Seconds are sold to discount stores for 50 each. Required: 1. Under the assumption that the loss from spoilage will be distributed to all jobs produced during the current period, use general journal entries to (a) record the costs of production, (b) put spoiled goods into inventory, and (c) record the cash sale of spoiled units. 2. Under the assumption that the loss due to spoilage will be charged to Job 100, use general journal entries to (a) record the costs of production, (b) put spoiled goods into inventory, and (c) record the cash sale of spoiled units.Suppose that Kicker had the following sales and cost experience (in thousands of dollars) for May of the current year and for May of the prior year: In May of the prior year, Kicker started an intensive quality program designed to enable it to build original equipment manufacture (OEM) speaker systems for a major automobile company. The program was housed in research and development. In the beginning of the current year, Kickers accounting department exercised tighter control over sales commissions, ensuring that no dubious (e.g., double) payments were made. The increased sales in the current year required additional warehouse space that Kicker rented in town. (Round ratios to four decimal places. Round sales dollars computations to the nearest dollar.) Required: 1. Calculate the contribution margin ratio for May of both years. 2. Calculate the break-even point in sales dollars for both years. 3. Calculate the margin of safety in sales dollars for both years. 4. CONCEPTUAL CONNECTION Analyze the differences shown by your calculations in Requirements 1, 2, and 3.
