What is the molarity of an unknown HCl solution with a specific gravity of 1.10 and an assay percentage of 18.5 %? (atomic weight: H = 1.00794, Cl = 35.4527)
Q: Ten pints of a 5% solution are diluted with 30 pints of diluent, what is the percentage strength of…
A: Initial amount = 10 pints Diluted by 30 pints. So, final amount = 10+30 = 40 pints. So, dilution…
Q: The standard addition method is used to analyze a sample of a river water for mercury. Solution A is…
A: Given, Percent transmittance value of solution A = 56 % Percent transmittance value of solution B =…
Q: The standard addition method is used to analyze a sample of a river water for mercury. Solution A is…
A: A question based on tools in analytical chemistry that is to be accomplished.
Q: A stock solution of potassium permanganate (KMn04) was prepared by dissolving 13.0g KMn04 with DI in…
A: Record the given data, The given weight of KMnO4 = 13.0 gm The molecular weight of KMnO4 = 158 g/mol…
Q: What volume (mL) of the prepared high alcoholic elixir is needed if the prescription requires 100 mL…
A: Given: Final volume of solution requrired = 100 mL. Final %(v/v) of the alcohol = 65 % And the…
Q: Calculate the solubility of barium fluoride (BaF2) in each of the following solutions. Ksp at 25 °C…
A:
Q: You are required to prepare working standard solutions of 1.00 × 10−5, 2.00 × 10−5, 5.00 × 10−5, and…
A: Given M₁ = 0.100M stock solution V₁ = volume of Stock solution M₂ = Working standard V₂ = Volume of…
Q: A 100.0-ml sample of boiler feed water, analyzed for hardness, required 36.8 ml of 0.0386 M EDTA to…
A:
Q: (Concentration) You are tasked to prepare 62.5 ppm of a caffeine standard for an analysis. You need…
A: Concentration in ppm=(mass of solute/Mass of solvent) × 10^6 Previously Concentration 0.025gm…
Q: What are the principles behind caffeine being extracted from coffee using the above items?
A: Caffeine extraction from coffee
Q: Part A Are the following solutions isotonic, hypotonic, or hypertonic compared with physiokogical…
A:
Q: lews SEC # Evaluation of Commercial Bleaching Solutions 22 DATA SHEET Brand name of commercial…
A: Concentration of NaOCl = M1 = 0.175M VOlume of NaOCl = V1 Concentration of KI = M2 = 0.225M Volume…
Q: A 100.0-ml sample of boiler feed water, analyzed for hardness, required 23.8 ml of 0.0146 M EDTA to…
A:
Q: 1. A 4.59 mL sample of HCl, specific gravity 1.3, required 50.5 mL of 0.9544N NaOH in a titration.…
A:
Q: A solution composed of 50% ethanol (ETOH), 10% methanol (MEOH), and 40% water (H20) is fed at the…
A: Given: 50% ethanol,10 % methanol and 40 % water assuming no reaction in=outso starting with the…
Q: (Concentration) You are tasked to prepare 300.000 ppb of a sodium carbonate standard for a…
A: Parts per billion (ppb) concentration is defined as: mass of solute (in grams)volume of solution (in…
Q: The standard addition method is used to analyze a sample of a river water for mercury. Solution A is…
A: Given, Percent transmittance of solution A = 56 % Percent transmittance of solution B = 33 % Percent…
Q: Calculation of the volume of 1.25 M NaOH (aq.) required to extract 1.0 gram of 2-naphthol. Use 20%…
A: Given: The molarity of NaOH (sodium hydroxide) is 1.25 M The mass of 2-naphthol is 1.0 g The amount…
Q: The standard addition method is used to analyze a sample of a river water for mercury. Solution A is…
A: Cold vapour atomic absorption spectroscopy or CVAAS is one of the primary techniques for mercury…
Q: An environmental chemist working for the Environmental Protection Agency (EPA) was directed to…
A: Varying amounts of 85.0 ppb (μg/L) Cd2+ standard solution were added to the unknown sample solution.…
Q: What volume (mL) of the prepared low alcoholic elixir is needed if the prescription requires 120 mL…
A: Given: %(v/v) of the final solution = 35 % Volume of final solution required = 120 mL. %(v/v) of low…
Q: A chemist receive different mixtures for analysis with the statement that it contain NaOH, NaHCO3 ,…
A: NaOH and NaHCO3 can't be present together in a mixture since they react to form Na2CO3. Thus,…
Q: K QRSTU v Q2b: Serial Dilution (M,V=M,V2) Dilute aliquots of the previously made solution solution…
A:
Q: A solution of Ca(OH)2 (FM = 74.09) was used in determining the equivalent weight of an unknown acid.…
A: The number of moles of KHP can be determined as follows: Number of moles of KHP = Given mass of…
Q: The peak integrations of a chromatogram resulting from a GC analysis of a mixture containing…
A: Area under the curve of GC is correspond to mass of that component.
Q: Explain in detail how you would make the solution from the previous question (50.00 mL a 300 ug/dL…
A: We have to prepare 50.00 mL of a 300 μg/dL solution from a 1500 μg/dL stock solution. So, here the…
Q: Based on the following molarities obtained,1.00 x10^-1 , 1.04 x10^-1 and 1.0 2x10^-1. fine the…
A: First the average molarity from given 3 values is calculated by adding those values and dividing it…
Q: ± 0.00098 18 Bromocresol green 0.08641 ± 0.00113 29 Is the difference between indicators
A: 95 % confidence interval for a population mean can be represented as
Q: 1-3: A stock solution of 70% v/v ethanol was diluted with distilled water to prepare 1L of 21% v/v…
A:
Q: Calculate the concentration of concentrated HCl in molarity. Concentrated HCl has 38% (w/w) HCl and…
A:
Q: If the solubility of a compound A in ether is 30g/100 ml, and the solubility of A in water is 15 g…
A: distribution ratio(ξ)=concentration of A in etherconcentration of A in water…
Q: -Volume of unknown acid___ -Average molarity of NaOH from above__ -mL of NaOH at equivalence point__…
A: Solutions- Given data- Sheet of pH readings, Molarity of NaOH etc.
Q: 1. What is the MW of the analyte? 2. What is the meq of the analyte? 3. What is the weight (in…
A: Since you have asked a question with multiple subparts we will answer the first three for you. To…
Q: 1. How many mg of sodium acetate (MW=82.03, feg=1) is equivalent to 1 ml of 0.5 N sulfuric acid? 2.…
A: According to law of equivalence, A reactant exactly reacts with the same number of equivalents of…
Q: Calculate the volume of concentrated (98% v.v) H2SO4 that you will need to prepare 250ml of an 5.4 M…
A: Given: Concentrated solution is 98% v/v Volume of diluted solution = 250 ml Molarity of diluted…
Q: Perform the necessary calculations for the preparation of: d) 100 mL of sulfuric acid (98.08 g /…
A: NOTE: please note according to our policies , we can only answer one question at one time. you have…
Q: A 3mL sample of NaOCl solution was diluted with water and treated with 2g of KI and 10mL Acetic…
A: Here 3ml of sample of NaOCl solution was treated with 2g of KI and 10 ml CH3COOH . The solution…
Q: 1-3: A stock solution of 70% v/v ethanol was diluted with distilled water to prepare 1L of 21% v/v…
A: a
Q: A wet pipette was used to transfer 10.00 mL of 1M HNO3 in the determination of ΔHrxn. [magnitude of…
A: Since you have posted multiple questions, we are entitled to answer the first only.
Q: A weight of 0.50 g was taken impure container containing sodium carbonate and bicarbonate. Dissolved…
A: In the carbonate composition analysis, the mixture containing unknown amounts of sodium carbonate…
Q: ▪ A pharmaceutical analyst needs to do quality control of a sodium furosemide solution. The max for…
A: Absorbance = Absorptivity coefficient × Concentration × Path length Path length = 1 cm Absorptivity…
Q: Cg 162 liters of a liquid chemical with a dimension less Henry's volatility constant of KG° Caq…
A:
Q: 17 g of unknown organic sample was dissolve in 564 mL of Dicloromethane (DCM). The boiling point of…
A: NOTE: It will be benzene only and not DCM as the data is given for benzene and there is a typo error…
Q: 20 Carbamazepine tablets were found to weigh 10.000 g in total. The tablets were ground to a fine…
A: This problem employs unitary method, dilution equation and absorbance equation. Absorbance is…
Q: 5mL 10% NaoH solution theo mmol diper theo mass divemakcetone mASs recovered mmol alacetorie mmol eg…
A: The questions are based on the concepts of experimental Chemistry. We have to calculate mass, moles…
Q: 1-3: A stock solution of 70% v/v ethanol was diluted with distilled water to prepare 1L of 21% v/v…
A:
Q: concentration of the total suspended solid. In the laboratory, 5 mL of the water sample was…
A: Initial weight of glass fiber filter = 0.2431 g = 243.1 mg and Glass fiber filter + suspended solid…
Q: 1-3: A stock solution of 70% v/v ethanol was diluted with distilled water to prepare 1L of 21% v/v…
A: Since you have posted multiple questions, we will answer the very first question. kindly repost the…
Q: Data Sheet with Sample Results Note: results that require calculations are purposely left blank and…
A: (7) Mass of NaCl dissolved : Mass of NaCl dissolved = (Mass of 50mL beaker + Stirring bar + NaCl) -…
Q: Which of the following methods of preparing 0.0010M HCl solution from 1.0M stock HCl Solution will…
A: The task is to determine overall uncertainty while preparing 0.0010 M HCl solution from 1.0 M stock…
What is the molarity of an unknown HCl solution with a specific gravity of 1.10 and an assay percentage of 18.5 %? (atomic weight: H = 1.00794, Cl = 35.4527)
PLS SHOW SOLUTION
Trending now
This is a popular solution!
Step by step
Solved in 2 steps with 2 images
- Patients undergoing an upper gastrointestinal tract laboratory test are typically given an X-ray contrast agent that aids with the radiologic imaging of the anatomy. One such contrast agent is sodium diatrizoate, a nonvolatile water-soluble compound. A 0.378-m solution is prepared by dissolving 38.4 g sodium diatrizoate (NaDTZ) in.l.60 102 mL water at 3 1.2C (the density of water at 31.2C is 0.995 g/cm3). What is the molar mass of sodium diatrizoate? What is the vapor pressure of this solution if the vapor pressure of pure water at 31.2C is 34.1 torr?Preparation of 100 ml 1.0 molar (1.0M) H2SO4 solution (specific gravity, 1.8 g/ml and purity, 98%). H2SO4 molecular weight is 98 grams.Mass solute needed to prepare 0.500L of 0.2 M NaCO3 from a solid NaCO3 with a purity of 92.0wt%
- A mixture of pure BaCO3 and pure Na2CO3 weighs 1.000 g and has the total neutralizing power of 15.37 meq of CaCO3. Calculate the percentage of combined CO2 in the mixture and the weight of Li2CO3 that has the same neutralizing power as 1.000 g of the above mixture. Instructions: Include up to 4 decimal places See sample photo for the format of solutionThe first goal is to make the oxalic acid standard solution. You measure 1.5232 g of oxalic acid on an analytical balance, add it to a 250-mL volumetric flask and add deionized H2O to a final volume of 250.0 mL. Molar mass of H2C2O4•2H2O = 126.07 g/mol Mass of H2C2O4•2H2O = 1.5232g Volume of H2C2O4•2H2O solution = 250.0mL What is the Molarity H2C2O4 standard solution ?A mixture of pure BaCO3 and pure Na2CO3 weighs 1.000 g and has the total neutralizing power of 15.37 meq of CaCO3. Calculate the percentage of combined CO2 in the mixture and the weight of Li2CO3 that has the same neutralizing power as 1.000 g of the above mixture. Note: include up to 4 decimal places Please explain each step
- Objective: To determine the percent NaCl (w/v) of a water sample 5.00 mL sample diluted to 50 mL solution 0.1000 M AgNO3 Volume of AgNO3 trial 1=15.30 mL trial 2=14.90 mL trial 3=15.10 mlA STOCK SOLUTION containing 0.1581 g/L K2CrO4 was prepared.In order to make the CALIBRATION STANDARD, 5 ml of the STOCK was transferredinto a 50ml volumetric flask and then diluted with an appropriate solvent.Calculate:(a) The ppm of K2CrO4 in the CALIBRATION STANDARD.(b) The molarity of K2CrO4 in the CALIBRATION STANDARD. (c) Calculate the molar absorptivity of K2CrO4 (at 371.0 nm). Assume that Beer's Law isobeyed over this concentration range.At 371.0 nm, this CALIBRATION STANDARD in a cell of path length 1.00 cm gave a %T of 59.752.Prepare 1500mL of 0.5N H2SO4 solution with specific gravity of 1.84g/mL and assay of 97%
- A 18 g of unknown organic sample was dissolve in 756 mL of benzene. The boiling point of benzene was increased by 3.36oC. As the first step of analysis, determine the moecular weight of the unknow sample? Kb of benzene= 2.64oC/m Bb of benzene = 80.09 oC density of benzene = 0.874 g/mL at 25 °C Answer in whole number, no units required.Measure the mass of 0.400g of Co(NO3)2 + 6H2O and dissolve it in 15mL of distilled or deionized water using a clean beaker Then while using a graduated cylinder, measure out 10.0mL of a prepared 0.10-M Na3PO4 soultion. Determine which compound Na3PO4 or Co(NO3)2 *6H2O will be the limliting reagent. Then detrimine the theiretical yeildThe thiourea in a 1.455 g sample of organic material was extracted into a dilute sulfuric acid solution and titrated with 37.31 mL of 0.009372 M Hg2+ via reaction: 4(NH2)2CS + Hg2+ →[(NH2)2CS]4 Hg2+ P.S. Answer only the last two letters of the following questions. (Only C and D) a. Is this an example of total analysis technique or concentration technique? Explain. b. Calculate the percent (NH2)2CS ( 76.12 g/mol) in the sample. c. What is classification of the analysis based on the amount of sample and amount of analytes present? Explain. d. If the true value is 10.00%, calculate the absolute and relative error.
