A cylindrical rod with a length of 380 mm and a diameter of 10 mm is to be subjected to a tensile load. The rod must not experience plastic deformation or an increase in length of more than 0.9 mm when a load of 24.5 kN is applied. Which of the four materials listed in the accompanying table are possible candidates? Justify your answer.
Learn your wayIncludes step-by-step video
Chapter 1 Solutions
Materials For Civil And Construction Engineers In Si Units
Additional Engineering Textbook Solutions
Foundation Design: Principles and Practices (3rd Edition)
Artificial Intelligence: A Modern Approach
Starting Out with Java: Early Objects (6th Edition)
Objects First with Java: A Practical Introduction Using BlueJ (6th Edition)
Introduction To Programming Using Visual Basic (11th Edition)
Thinking Like an Engineer: An Active Learning Approach (3rd Edition)
- Question 1: A 25mm diameter aluminum rod is loaded axially in tension with a load of 100kN. The rod is 4 m in length. Aluminum has a modulus of elasticity of 69GPa and a Poisson’s ratio of 0.35. 1) What is the decrease in diameter of the rod due to the applied load? 2) What is the new length of the rod?arrow_forwardA rod made of aluminum alloy, with a gauge length of 100 mm, diameter of 10 mm, and yield strength of 150 MPa, was subjected to a tensile load of 5.85 kN. If the gauge length was changed to 100.1 mm and the diameter was changed to 9.9967 mm,calculate the modulus of elasticity and Poisson’s ratio.arrow_forwardA cylindrical rod 500 m (20.0 in) long, having a diameter of 12.7 mm (0.50 in.), is to be subjected to a tensile load. If the rod is to be experienced neither plastic deformation nor an elongation of more than 1.3 mm (0.05 in.) when the applied load is 29,000 N (6500 lb), which of the four metals or alloys listed are possible candidates? Justify your choice(s).arrow_forward
- A rod made of aluminum alloy with a gauge length of 200 mm, diameter of 11mm, and yield strength of 150 MPa, was subjected to a tensile load of 5.85 kN. If the gauge length was changed to 100.10 mm and the diameter was changed to 9.9967mm, calculate the modulus of elasticity and Poison’s ratio. Are the numbers in line with standard numbers for Aluminum Alloy?arrow_forwardA specimen is originally 300 mm long, has a diameter of 12 mm, and is subjected to a force of 2.4 kN. When the force is increased from 2.4 kN to 9 kN, the specimen elongates 0.250 mm. Determine the modulus of elasticity for the material if it remains linear elastic. Express your answer to three significant figures and include the appropriate units.arrow_forwardA plastic cube with a 100 mm X 100 mm X 100 mm. is placed in a pressurechamber and subjected to a pressure of 100 MPa. If the modulus of elasticityis 7 GPa and Poisson’s ratio is 0.39, what will be the decrease in each side ofthe block, assuming that the material remains within the linear elastic region?What will be the decrease in the volume of the cube?arrow_forward
- A 10 cm long rectangular bar (when subjected to a tensile load) deforms by 0.1 mm. Calculate the normal strain.arrow_forwardA plastic cube with a 4 in. x 4 in. x 4 in. is placed in a pressure chamber and subjected to a pressure of 15,000 psi. If the modulus of elasticity is 1,000 ksi and Poisson’s ratio is 0.49, what will be the decrease in each side of the block, assuming that the material remains within the linear elastic region? What will be the decrease in the volume of the cube?arrow_forwardA rigid steel container is partially filled with 1.232-liters of liquid at 15 atm. At a pressure of 30 atm, the volume of the liquid is 1.231-liters. a. What is the bulk modulus of elasticity of the given liquid in kPa? b. What is the compressibility of the given liquid?arrow_forward
- A specimen is originally 300mm long, has a diameter of 14mm, and is subjected to a force of 2 kN. When the force is increased from 2 kN to 8 kN, the specimen elongates 0.225 mm. Determine the modulus of elasticity for the material if it remains linear elastic. Express your answer to three significant figures and include the appropriate units.arrow_forwardA plastic cube with a 4 in. * 4 in. * 4 in. is placed in a pressure chamber and subjected to a pressure of 15,000 psi. If the modulus of elasticity is 1000 ksi and Poisson’s ratio is 0.49, what will be the decrease in each side of the block,assuming that the material remains within the linear elastic region? What will be the decrease in the volume of the cube?arrow_forwardA piece of steel wire 100 feet long, with a cross-sectional area of 0.004 aq. in., must be stretched with a pull of 16 pounds when in use . if the modulus of elacticity of steel is 30,000 psi: a) what is the total elognation in the entire length of the wire? b) what tensile stress is producted by the pull?arrow_forward
- Materials Science And Engineering PropertiesCivil EngineeringISBN:9781111988609Author:Charles GilmorePublisher:Cengage Learning