MindTap Engineering for Das/Sobhan's Principles of Geotechnical Engineering, 9th Edition, [Instant Access], 2 terms (12 months)
9th Edition
ISBN: 9781305971257
Author: Braja M. Das; Khaled Sobhan
Publisher: Cengage Learning US
expand_more
expand_more
format_list_bulleted
Concept explainers
Question
Chapter 12, Problem 12.8P
(a)
To determine
Find the inclination of the failure plane with the major principal plane.
(b)
To determine
Find the normal and shear stress on a plane inclined at
Explain why the specimen did not fail along this plane.
Expert Solution & Answer
Trending nowThis is a popular solution!
Students have asked these similar questions
A triaxial shear test was performed on a well-drained sand sample. The normal stress on the failure plane and the shear stress on the failure plane, at failure were determined to be 6100 psf and 4600 psf, respectively.
a. Determine the angle of internal friction of the sand?
b. Determine the angle of the failure plane?
c. Determine the maximum principal stress?
Please answer this asap. For upvote. Thank you very much
2. A triaxial shear test was performed on a well-drained sand
sample. The normal stress on the failure plane and the shear
stress on the failure plane, at failure was determined to be
6,300 psf and 4,200 psf, respectively.
a. Determine the angle of internal friction of the sand.
b. Determine the angle of failure plane.
c. Determine the maximum principal stress.
A consolidated drained (CD) triaxial test was carried out on a normally consolidated clay. The specimen was consolidated under a cell pressure of 100 kPa and back pressure of 30 kPa. The axial deviatoric stress was increased very slowly to failure, so that there was no excess pore water pressure developed during the shearing. The specimen failed under a deviatoric stress of 130 kPa. The back pressure of 30 kPa was maintained throughout the test.
(i) What is the friction angle in terms of effective stresses? (ii) What are the shear stress and normal stress acting on the failure plane?
Solution fast please
Chapter 12 Solutions
MindTap Engineering for Das/Sobhan's Principles of Geotechnical Engineering, 9th Edition, [Instant Access], 2 terms (12 months)
Ch. 12 - Prob. 12.1PCh. 12 - Prob. 12.2PCh. 12 - Prob. 12.3PCh. 12 - Prob. 12.4PCh. 12 - Prob. 12.5PCh. 12 - Prob. 12.6PCh. 12 - Prob. 12.7PCh. 12 - Prob. 12.8PCh. 12 - Prob. 12.9PCh. 12 - Prob. 12.10P
Ch. 12 - Prob. 12.11PCh. 12 - Prob. 12.12PCh. 12 - Prob. 12.13PCh. 12 - Following are the results of...Ch. 12 - Prob. 12.15PCh. 12 - Prob. 12.16PCh. 12 - Prob. 12.17PCh. 12 - Prob. 12.18PCh. 12 - Prob. 12.19PCh. 12 - Prob. 12.20PCh. 12 - Prob. 12.21PCh. 12 - Prob. 12.22PCh. 12 - Prob. 12.23PCh. 12 - Prob. 12.24PCh. 12 - Prob. 12.1CTP
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.Similar questions
- Question 3 The results of two consolidated-drained test triaxial tests on a clay are given below: Specimen No. Chamber Pressure Deviator Stress 220 400 105 II 210 1. Determine the angle of internal friction. 2. Determine the cohesion of the clay. 3. Determine the normal stress on the point on the failure plane of the 2"d specimen. O Question 1: A. 26.744 O Question 1: B. 26.042 O Question 1: C. 27.871 O Question 1: D. 27.486 O Question 2: A. 10.737 O Question 2: B. 12.141 O Question 2: C. 17.372 O Question 2: D. 14.836 O Question 3: A. 317.694 O Question 3: B. 232.575 O Question 3: C. 230.306 O Question 3: D. 322.194 O O O O O O O COarrow_forwardA consolidated un-drained triaxial test was performed on a specimen of saturated clay with a kg chamber pressure o =2.0. At failure, cm² and the failure plane angle 0 = 57°. and (2) shear stress T on the failure surface and (3) the kg 0₁-03 2.8- cm u=1.8- cm Calculate (1) the normal stress maximum shear stress on the specimen.arrow_forward5. A consolidated, undrained triaxial test is being caried out on a normally consolidated clay where c = 0 and 41= 26'. The triaxial specimen was consolidated under a cell pressure of 300 kPa and backpressure of 80 kPa. Skempton's A parameter at failure is estimated to be 0.80. The drainage valve has since been dosed and the vertical deviator stress increased to failure. What would be the deviator stress and pore water pressure at failure?arrow_forward
- Answer any one asap 1.A triaxial test is performed on a normally consolidated clay. The sample is further consolidated by the test of all-around confining pressure prior to the application of the axial load. The axial force is applied very slowly. The equipment pore pressure lines remain open so that drainage of the soil pore water can occur during the test. The sample fails when minor principal stress is 49 kPa and the major principal stress is 91 kPa. Determine the angle of internal friction with no decimal places. 2.A dry sand sample was tested in direct shear and yielded a shear strength of 132 kPa under a normal stress of 215 kPa. Lab results indicate the soil's wet unit weight is 18.1 kN/m3 and the saturated unit weight is 20.2 kN/m3. Determine the shear strength, in kPa, within the native sand deposit at a depth of 2.5 m below the water table. The water table is 3 m below ground surface. Provide your answer with 2 decimal places, do not include the units and assume a unit…arrow_forwardA consolidated drained (CD) triaxial test was carried out on a normally consolidated clay. The specimen was consolidated under a cell pressure of 100 kPa and back pressure of 30 kPa. The axial deviatoric stress was increased very slowly to failure, so that there was no excess pore water pressure developed during the shearing. The specimen failed under a deviatoric stress of 130 kPa. The back pressure of 30 kPa was maintained throughout the test. (1) What is the friction angle in terms of effective stresses? (ii) What are the shear stress and normal stress acting on the failure plane?arrow_forward9. A consolidated drained test was carried out on a sandy clay under a cell pressure of 250 kPa. A constant back pressure of 120 kPa applied throughout the test. The dimensions of the sample were 76 mm x 38 mm. Addional test data recorded at failure were: Load transducer force = 368 N 3 Measured change in volume = 2.42 x 10 m³ Axial deformation = 2.05 mm Determine the major principal stress, o, at failure. (455 kPa)arrow_forward
- Question-3: (a) In a consolidated drained triaxial test, a specimen of saturated sand failed under an deviator stress of 250 kN/m², when the cell pressure was 100 kN/m². i. Illustrate by drawing the Mohr circle for the failure stress condition. Solve for ø' and the theoretical inclination of the failure plane to the ii. horizontal. iii. failure. iv. Solve for the shear stress on the failure plane and maximum shear stress at Solve for factor of safety with respect to shear strength on the plane of maximum shear stress?arrow_forwardIn a triaxial test, a specimen of saturated [normally consolidated] clay was consolidated under a chamber confining pressure of 80 kPa. The axial stress on the specimen was then increased through the allowing the drainage from the specimen. The specimen fails when 120 kPa. The pore water pressure at the time was 50 kPa. What is the consolidated undrained friction angle [phi]?arrow_forwardProblem 3: A consolidated-drained triaxial test is carried out on a sand specimen that is subjected to 80 kN/m? confining pressure. The vertical deviator stress was increased slowly such that there is no built-up of pore water pressure within the specimen. The specimen failed when the addition axial stress reached 240 kN/m?. Find the friction angle of the sand. If another identical sand specimen was subjected to 150 kN/m? confining pressure, what would be the deviator stress at failure.arrow_forward
- A triaxial shear test was performed on a well-drained sand sample. The normal stress on the failure plane and the shearing stress on the failure plane were determined to be 75kPa and 42kPa, respectively. Determine the angle of internal friction of the sand, in degrees.Determine the axial stress applied to the specimen, in kPa.arrow_forwardc. An undisturbed soil sample, 110 mm in diameter and 220 mm in height, was tested in a triaxial machine. The sample sheared under an additional axial load of 3.35 kN with a vertical deformation of 21 mm. The failure plane was inclined at 50° to the horizontal and the cell pressure was 300 kN/m². i. Draw the Mohr circle diagram representing the above stress conditions, and from it determine: - Coulomb's equation for the shear strength of the soil, in terms of total stress; - the magnitude and obliquity of the resultant stress on the failure plane. ii. A further undisturbed sample of the soil was tested in a shear box under the same drainage conditions as used for the previous test. If the area of the box was 3600 mm² and the normal load was 500 N, what would you expect the failure stress to have been?arrow_forwardFriction angle of dry sand is 35°. In a direct shear test on this sand, a normal stress of 150kPa was applied. What shear stress will cause the failure? (a) 150kPa (b) 50kPa (c) 78kPa (d) 105kPaarrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
- Principles of Geotechnical Engineering (MindTap C...Civil EngineeringISBN:9781305970939Author:Braja M. Das, Khaled SobhanPublisher:Cengage LearningFundamentals of Geotechnical Engineering (MindTap...Civil EngineeringISBN:9781305635180Author:Braja M. Das, Nagaratnam SivakuganPublisher:Cengage LearningPrinciples of Foundation Engineering (MindTap Cou...Civil EngineeringISBN:9781337705028Author:Braja M. Das, Nagaratnam SivakuganPublisher:Cengage Learning
- Principles of Foundation Engineering (MindTap Cou...Civil EngineeringISBN:9781305081550Author:Braja M. DasPublisher:Cengage Learning
Principles of Geotechnical Engineering (MindTap C...
Civil Engineering
ISBN:9781305970939
Author:Braja M. Das, Khaled Sobhan
Publisher:Cengage Learning
Fundamentals of Geotechnical Engineering (MindTap...
Civil Engineering
ISBN:9781305635180
Author:Braja M. Das, Nagaratnam Sivakugan
Publisher:Cengage Learning
Principles of Foundation Engineering (MindTap Cou...
Civil Engineering
ISBN:9781337705028
Author:Braja M. Das, Nagaratnam Sivakugan
Publisher:Cengage Learning
Principles of Foundation Engineering (MindTap Cou...
Civil Engineering
ISBN:9781305081550
Author:Braja M. Das
Publisher:Cengage Learning