Concept explainers
One line voltage of a balanced Y-connected source is
Answer:
Want to see the full answer?
Check out a sample textbook solutionChapter 12 Solutions
FUNDAMENTALS OF ELEC.CIRC.(LL)-W/ACCESS
- Exercise 1: A three-phase 3Φ transmission line has an impedance of 0.62+j35.06Ω/phase and supplies a three-phase load of 100MW with a power factor (fp) of 0.8 lagging at 200kV. Taking 100MVA and 215kV as a base, we ask: a-) Calculate the impedance of the line in p.u;b-) Calculate the current consumed by the load in p.u;c-) Calculate the load voltage in p.u; PLEASE, TYPE, HAND WRITING GETS UNDERSTANDING.arrow_forwardS.4) the length of a three-phase power transmission line with a Nominal operating voltage of 69 kV is 16km. The impedance of the transmission line per unit length is 0.125 + j0.4375 ohm/km. From the end of the line, a 56 MW star connected load is fed with a power coefficient of 0.8 back under a 64 kV interphase voltage. If the line head voltage of the transmission line is 69 kV, calculate the capacity and power of the star-connected capacitor to be shunted into the load connected to the end of the line.arrow_forwardA 4200-V, three-phase transmission line has an impedance of 4+j ohms per phase. If it supplies a load of 1 MVA at 0.75 power factor, find: (a) the complex power (b) the power loss in the line (c) the voltage at the sending end. *Ans. S=0.75+j0.66 MVA, PL=25.14 kW and VS=4.492∠ − 1.912°kV Use four decimal places.arrow_forward
- I need all steps answer A 3-phase overhead transmission line delivers a load of 80 MW at 0.8 pf legging 220 KV between the lines. Its total series impedance per phase and shunt admittance per phase is 200∠80° ohms and 0.0013 ∠90° mhos per phase respectively. Using nominal T method determine (i)A,B,C,D constants of the line (ii) Sending end voltage (iii) Sending end current (iv) Sending end power factor (v) Transmission efficiency of the line.arrow_forwardA 3 - phase , 50 Hz 50 km long overhead line supplies 1800 kW at 11 kv . 0.8 p.f. lagging . The line resistance is 0,015 0 per phase per km and 0.8 ml per phase per km . Calculate the sending end voltage , voltage regulation and efficiency of transmission Sending End Voltage Voltage Regulation Transmission efficiencyarrow_forwardA 3-phase RYB sequence, 4-wire distributor supplies a balanced line-neutral voltage of 230 V to the Y connected loads: Phase R: 20KW, unity power factorPhase Y: 24.89 KW, 0.866 laggingPhase B: 24.89 KW, 0.866 leadinga) Calculate the current in each line.b) Clearly draw the voltage and current phasor diagram.c) Calculate the current in the neutral.arrow_forward
- A 3-phase, 50-Hz overhead transmission line 100 km long has the following constants : Resistance/km/phase = 0.1 Ω Inductive reactance/km/phase = 0·2 Ω Capacitive susceptance/km/phase = 0·04 × 10− 4 siemens Determine sending end voltage when supplying a balanced load of 10,000 kW at 66 kV, p.f. 0·8 lagging. Use nominal T method . Select one: a. 330 kV b. 52 kV c. None of the above d. 69.5 kVarrow_forwardA single – phase transmission line supplies a reactive load at a lagging power factor. The load draws 1.2 pu current at 0.6 pu voltage while drawing 0.5 pu (true) power. If the base voltage is 20 kV and the base current is 160 A, calculate the power factor and the ohmic value of the resistance of the load.arrow_forwardA single phase 11 kV line with a length of 15 km is to transmit 500 kVA. The inductive reactance of the line is 0·5 Ω/km and the resistance is 0·3 Ω/km. Calculate the efficiency and regulation of the line for 0·8 lagging power factor. [97·74%, 3·34%]arrow_forward
- SOLVE FOR THE UNKNOWN CURRENTS AND VOLTAGES ASKED source: 208V balanced line to line Line 1: Conductors with impedance per line of 0.4+j1.2 Line 2: Conductors with impedance per line of 0.7+j1.7 Load 1: Y-connected with impedance per phase of 30+j40 Load 2: delta-connected with impedance per phase of 60+j42 (convert to WYE) Load 3: Y-connected with impedance per phase of 0.0-j23 previous answer is incorrect, i will downvote if answer is wrong, answer allarrow_forwardA balanced 3-phase load of 30 MW is supplied at 144.3 kV and 0.85 pf lagging by means of transmission line. The sending end voltage is 141.1 kV. The value of constant A is 0.9. Find the %regulation of the transmission linearrow_forwardA 110 kV, 50 Hz, three phase 300km delivers 20 MW of power at power factor of 0.8 lagging. The line has the following parameters: R' = 0.16 0/km, X'= 0.250/km. y'=j1.5 u mho/km, calculate: a) The sending end voltage and current b) Voltage regulation c) Transmission efficiencyarrow_forward
- Introductory Circuit Analysis (13th Edition)Electrical EngineeringISBN:9780133923605Author:Robert L. BoylestadPublisher:PEARSONDelmar's Standard Textbook Of ElectricityElectrical EngineeringISBN:9781337900348Author:Stephen L. HermanPublisher:Cengage LearningProgrammable Logic ControllersElectrical EngineeringISBN:9780073373843Author:Frank D. PetruzellaPublisher:McGraw-Hill Education
- Fundamentals of Electric CircuitsElectrical EngineeringISBN:9780078028229Author:Charles K Alexander, Matthew SadikuPublisher:McGraw-Hill EducationElectric Circuits. (11th Edition)Electrical EngineeringISBN:9780134746968Author:James W. Nilsson, Susan RiedelPublisher:PEARSONEngineering ElectromagneticsElectrical EngineeringISBN:9780078028151Author:Hayt, William H. (william Hart), Jr, BUCK, John A.Publisher:Mcgraw-hill Education,