(a)
Find the magnitude and line of action of the propulsive thrust developed by the engine when the speed of the airplane is
(a)
Answer to Problem 14.74P
The magnitude of airplane is
The line of action of the propulsive thrust developed by the engine when the speed of the airplane is
Explanation of Solution
Given information:
The mass
The initial velocity
The velocity
Calculation:
Sketch the free body diagram of airplane as shown in Figure 1.
Refer to Figure 1.
Here, F is force that the plane exerts on the air.
Express the force that the plane exerts on air by using impulse momentum principle.
Take a moment about B,
Find the unit mass flow rate from
Here,
Substitute
Find the magnitude (F) of airplane using the relation as follows:
Substitute
Thus, the magnitude of airplane is
Find the line of action of the propulsive thrust developed by the engine when the speed of the airplane is
From Equation (2).
Substitute
Substitute
Thus, the line of action of the propulsive thrust developed by the engine when the speed of the airplane is
(b)
Find the magnitude and line of action of the propulsive thrust developed by the engine when the speed of the airplane is
(b)
Answer to Problem 14.74P
The magnitude of airplane is
The line of action of the propulsive thrust developed by the engine when the speed of the airplane is
Explanation of Solution
Calculation:
Find the magnitude (F) of airplane using the relation as follows:
Substitute
Thus, the magnitude of airplane is
Find the line of action of the propulsive thrust developed by the engine when the speed of the airplane is
Substitute
Thus, the line of action of the propulsive thrust developed by the engine when the speed of the airplane is
Want to see more full solutions like this?
Chapter 14 Solutions
EBK VECTOR MECH...,COMBINED
- The nozzle shown discharges water at the rate of 200 gal/min. Knowing that at both B and C the stream of water moves with a velocity of magnitude 100 ft/s, and neglecting the weight of the vane, determine the force-couple system that must be applied at A to hold the vane in place (1 ft3 = 7.48 gal).arrow_forwardThe main propulsion system of a space shuttle consists of three identical rocket engines, each of which burns the hydrogen-oxygen propellant at the rate of 750 lb/s and ejects it with a relative velocity of 12,000 ft/s. Determine the total thrust provided by the three engines.arrow_forwardThe jet engine shown scoops in air at A at a rate of 200 lb/s and discharges it at B with a velocity of 2000 ft/s relative to the airplane. Determine the magnitude and line of action of the propulsive thrust developed by the engine when the speed of the airplane is (a) 300 mi/h, (b) 600 mi/h.arrow_forward
- A nozzle at A discharges water with an initial velocity of 36 ft/s at an angle a with the horizontal. Determine (a) the distance d to the farthest point B on the roof that the water can reach, (b) the corresponding angle a. Check that the stream will clear the edge of the roof.arrow_forwardShow that the speeds of a projectile are the same at any two pointsin its path which are at the same elevation.arrow_forwardA rocket weighs 2600 lb, including 2200 lb of fuel, which is consumed at the rate of 25 lb/s and ejected with a relative velocity of 13,000 ft/s. Knowing that the rocket is fired vertically from the ground, determine (a) its acceleration as it is fired, (b) its acceleration as the last particle of fuel is being consumed, (c) the altitude at which all the fuel has been consumed, (d) the velocity of the rocket at that time.arrow_forward
- A circular reentrant orifice (also called Borda’s mouthpiece) of diameter D is placed at a depth h below the surface of a tank. Knowing that the speed of the issuing stream is v= 2gh and assuming that the speed of approach v1 is zero, show that the diameter of the stream is d= DI 2. (Hint: Consider the section of water indicated, and note that P is equal to the pressure at a depth h multiplied by the area of the orifice.)arrow_forwardThe rocket used to launch the 540-kg spacecraft of Prob. 14.95 is redesigned to include two stages A and B , each of mass 9.5 Mg, including 8.9 Mg of fuel. The fuel is again consumed at a rate of 225 kg/s and ejected with a relative velocity of 3600 m/s. Knowing that when stage A expels its last particle of fuel, its casing is released and jettisoned, determine (a) the speed of the rocket at that instant, (b) the maximum speed imparted to the spacecraft.Reference to Problem 14.95:arrow_forwardThe missile weighs 47000 lb. The constant thrust provided by the turbojet engine isT = 18000 lb. Additional thrust is provided by two rocket boosters B. The propellant ineach booster is burned at a constant rate of 175 lb/s, with a relative exhaust velocity of 2000f t/s. If the mass of the propellant lost by the turbojet engine can be neglected, determinethe velocity of the missile after the 6 s burn time of the boosters. The initial velocity ofthe missile is 150 mi/h. Using your integration procedure from the previous labs solve thisproblem with n = 5, n = 10 and n = 100.arrow_forward
- Determine the altitude reached by the spacecraft of Prob. 14.95 when all the fuel of its launching rocket has been consumed.Reference to Problem 14.95:A 540-kg spacecraft is mounted on top of a rocket with a mass of 19 Mg, including 17.8 Mg of fuel. Knowing that the fuel is consumed at a rate of 225 kg/s and ejected with a relative velocity of 3600 m/s, determine the maximum speed imparted to the spacecraft if the rocket is fired vertically from the ground.arrow_forwardThe helicopter shown can produce a maximum downward air speed of 80 ft/s in a 30-ft-diameter slipstream. Knowing that the weight of the helicopter and its crew is 3500 lb and assuming y= 0.076 lb/ft3 for air, determine the maximum load that the helicopter can lift while hovering in midair.arrow_forwardA pump is located near the edge of the horizontal platform shown. The nozzle at A discharges water with an initial velocity of 22 ft/s at an angle of 55° with the vertical. Determine the range of values of the height h for which the water enters the opening BC. The range of values of h is ____ft < h < _____ft.arrow_forward
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY