Thermodynamics: An Engineering Approach
Thermodynamics: An Engineering Approach
8th Edition
ISBN: 9780073398174
Author: Yunus A. Cengel Dr., Michael A. Boles
Publisher: McGraw-Hill Education
bartleby

Videos

Question
Book Icon
Chapter 14.7, Problem 83P

a)

To determine

The rate of heat transfer of air stream.

a)

Expert Solution
Check Mark

Answer to Problem 83P

The rate of heat transfer of air stream is 255.6Btu/min.

Explanation of Solution

Write the expression to obtain the vapor pressure of air (Pv1).

Pv1=ϕ1Pg1=ϕ1Psat@90°F (I)

Here, saturated pressure is Psat, relative humidity is ϕ1, and saturation pressure of water is Pg1.

Write the expression to obtain the atmospheric pressure of an ideal gas mixture (P1).

P1=Pa1+Pv1 (II)

Here, vapor pressure at state 1 is Pv1 and dry air partial pressure at state 1 is Pa1.

Write the expression to obtain the specific volume of circular duct (v1).

v1=RaT1Pa1 (III)

Here, inlet temperature is T1 and gas constant of air is Ra.

Write the expression to obtain the specific humidity (ω1) of incoming air.

ω1=0.622Pv1P1Pv1 (IV)

Write the expression to obtain the enthalpy at state 1 (h1).

h1=cpT1+ω1hg1 (V)

Here, specific heat of air is cp, initial temperature is T1, and initial condition of enthalpy at saturation vapor is hg1.

Write the expression to obtain the exit vapor pressure of air (Pv2).

Pv2=ϕ2Pg2=ϕ2Psat@70°F (VI)

Here, saturated pressure is Psat, relative humidity is ϕ1, and saturation pressure of water is Pg1.

Write the expression to obtain the atmospheric pressure of an ideal gas mixture (P2) at outlet conditions.

P2=Pa2+Pv2 (VII)

Here, vapor pressure at state 2 is Pv2 and dry air partial pressure at state 2 is Pa2.

Write the expression to obtain the specific volume of circular duct (v2) at outlet conditions.

v2=RaT2Pa2 (VIII)

Here, final temperature is T2 and gas constant of air is Ra.

Write the expression to obtain the specific humidity (ω2) of leaving air.

ω2=0.622Pv2P2Pv2 (IX)

Write the expression to obtain the enthalpy at state 2 (h2).

h2=cpT2+ω2hg2 (X)

Here, specific heat of air is cp, final temperature is T2, and final condition of enthalpy at saturation vapor is hg2.

Write the expression to obtain the volume flow rate (V˙1).

V˙1=V1A1=V1(πD24) (XI)

Here, diameter is D, and velocity of air is V1.

Write the expression to obtain the mass flow rate of dry air through the cooling section (m˙a1).

m˙a1=V˙1v1 (XII)

Here, volume flow rate of air entering the cooling section is V1.

Apply the water mass balance equation to the combined cooling and dehumidification section.

m˙w,i=m˙w,em˙a1ω1=m˙a2ω2+m˙wm˙w=m˙a1(ω2ω1) (XIII)

Here, initial and final mass flow rate of dry air is m˙a1 and m˙a2, specific humidity of air entering  and leaving the cooling coils is ω1 and ω2, and mass flow rate of vapor is m˙w.

Apply the water energy balance equation to the combined cooling and dehumidification section.

E˙inE˙out=ΔE˙system(steady)E˙inE˙out=0E˙in=E˙out

m˙ihi=Q˙out+m˙eheQ˙out=m˙a1h1(m˙a2h2+m˙whw)Q˙out=m˙a1(h1h2)m˙whw (XIV)

Here, the amount of energy rate required for cooling coils is E˙in, amount of rate of energy rejected from cooling coils is E˙out, change in the energy rate of a system is ΔE˙system, and rate of heat removal from air is Q˙out.

Conclusion:

Refer Table A-4E, “Saturated water – Temperature table”, write the value of saturation pressure of liquid (Pv) as 0.69904 psia at a temperature of 90°F.

Substitute 0.69904 psia for Psat@90°F and 0.6 for ϕ1 in Equation (I).

Pv1=(0.6)(0.69904psia)=0.42psia

Refer Table A-5E, “Saturated water – Temperature table”, obtain the properties of water at a temperature of 90°F.

Tdp=Tsat@Pv=Tsat@0.69904 psia=74.2°F

Rewrite Equation (II) and substitute 14.4 psia for P1 and 0.42psia for Pv1 in Equation (II).

Pa1=P1Pv1=14.4psia0.42psia=13.98psia

Convert the unit of T1 from °F to R.

T1=90°F=(90+460)R=550R

Refer the Table “Ideal gas specific heats of various common gases”, write the value of Ra for air as 0.3707psiaft3/lbmR.

Substitute 0.3704psiaft3/lbmR for Ra, 550 R for T1, and 13.98 psia for Pa1 in Equation (III).

v1=(0.3704psiaft3/lbmR)(550R)(13.98psia)=14.57ft3/lbmdryair

The mass flow rate of dry air remains constant, but the amount of moisture in the air decreases due to the dehumidification (ω2<ω1).

Substitute 0.42 psia for Pv1 and 14.4 psia for P1 in Equation (IV).

ω1=0.622(0.42psia)14.4psia0.42psia=0.0187lbmH2O/lbmdryair

Refer Table A-4E, “Saturated water – Temperature table”, write the value of hg1 as 1,100.4Btu/lbm at a temperature of 90°F.

Refer the Table “Ideal gas specific heats of various common gases”, write the value of cp for air as 0.24Btu/lbm°F.

Substitute 0.24Btu/lbm°F for cp, 90°F for T1, 0.0187lbmH2O/lbmdryair for ω1, and 1,100.4Btu/lbm for hg1 in Equation (V).

h1=(0.24Btu/lbm°F)(90°F)+[(0.0187lbmH2O/lbmdryair)(1,100.4Btu/lbm)]=42.18Btu/lbmdryair

Refer Table A-4E, “Saturated water – Temperature table”, write the value of saturated pressure (Psat) as 0.36 psia at a temperature of 70°F.

Substitute 0.36 psia for Psat@70°F and 1.00 for ϕ in Equation (VI).

Pv2=(1.00)(0.36psia)=0.36psia

Rewrite Equation (VII) and substitute 14.4 psia for P2 and 0.36 psia for Pv2.

Pa2=P2Pv2=14.4psia0.36psia=14.04psia

Convert the unit of T2 from °F to R.

T2=70°F=(70+460)R=530R

Substitute 0.3704psiaft3/lbmR for Ra, 530 R for T1, and 14.04 psia for Pa2 in Equation (VIII).

v2=(0.3704psiaft3/lbmR)(530R)(14.04psia)=14.00ft3/lbmdryair

Substitute 0.36 psia for Pv2 and 14.4 psia for P2 in Equation (IX).

ω2=0.622(0.36psia)14.4psia0.36psia=0.0159lbmH2O/lbmdryair

Refer Table A-4E, “Saturated water – Temperature table”, write the value of hg2 as 1,091.8Btu/lbm at a temperature of 70°F.

Substitute 0.24Btu/lbm°F for cp, 70°F for T2, 0.0159lbmH2O/lbmdryair for ω2, and 1,091.8Btu/lbm for hg2 in Equation (X).

h2=(0.24Btu/lbm°F)(70°F)+[(0.0159lbmH2O/lbmdryair)(1,091.8Btu/lbm)]=34.16Btu/lbmdryair

Refer Table A-4E, “Saturated water – Temperature table”, write the value of enthalpy at saturation liquid (hf@70°Fhw) as 38.08Btu/lbm at a temperature of 70°F.

Substitute 1 ft for D and 600ft/min for V1 in Equation (XI).

V˙1=600ft/min(π(1ft)24)=471ft3/min

Substitute 471ft3/min for V˙1, and 14.57ft3/lbmdryair for v1 in Equation (XII).

m˙a1=471ft3/min14.57ft3/lbmdryair=32.3lbm/min

Substitute 32.3lbm/min for m˙a1, 0.0159lbmH2O/lbmdryair for ω2, and 0.0187lbmH2O/lbmdryair for ω1 in Equation (XIII).

m˙w=32.3lbm/min(0.0159lbmH2O/lbmdryair0.0187lbmH2O/lbmdryair)=0.0904lbm/min

Substitute 38.08Btu/lbm for hw, 0.0904lbm/min for m˙w, 32.3lbm/min for m˙a1, 42.18Btu/lbmdry air for h1, and 34.16Btu/lbmdry air for h2 in Equation (XIV).

Q˙out=(32.3lbm/min(42.18Btu/lbmdry air34.16Btu/lbmdry air)(0.0904lbm/min)(38.08Btu/lbm))=255.6Btu/min

Thus, rate of heat transfer of air stream is 255.6Btu/min.

b)

To determine

The mass flow rate of cooling water.

b)

Expert Solution
Check Mark

Answer to Problem 83P

The mass flow rate of cooling water is 18.3lbm/min.

Explanation of Solution

Write the expression to obtain the mass flow rate of cooling water (m˙coolingwater).

m˙coolingwater=Q˙wcpΔT (XV)

Here, specific heat of water is cp, rate of heat transfer of water is Q˙w, and change in temperature of air is ΔT.

Conclusion:

Substitute 1.0Btu/lbm°F for cp, 14°F for ΔT, and 255.6Btu/min for Q˙w in Equation (XV).

m˙coolingwater=255.6Btu/min(1.0Btu/lbm°F)(14°F)=18.3lbm/min

Thus, the mass flow rate of cooling water is 18.3lbm/min.

c)

To determine

The exit velocity of the airstream.

c)

Expert Solution
Check Mark

Answer to Problem 83P

The exit velocity is 577ft/min.

Explanation of Solution

Apply the conservation of mass of dry air to calculate exit velocity (V2).

m˙a1=m˙a2V1Av1=V2Av2V2=v2v1V1 (XVI)

Conclusion:

Substitute 14ft3/lbmdryair for v2, 14.57ft3/lbmdryair for v1, and 600ft/min for V1 in Equation (XVI).

V2=(14ft3/lbmdryair)(14.57ft3/lbmdryair)(600ft/min)=577ft/min

Thus, the exit velocity is 577ft/min.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Chapter 14 Solutions

Thermodynamics: An Engineering Approach

Ch. 14.7 - A tank contains 15 kg of dry air and 0.17 kg of...Ch. 14.7 - Prob. 12PCh. 14.7 - Prob. 13PCh. 14.7 - 14–13 A room contains air at 20°C and 98 kPa at a...Ch. 14.7 - A room contains air at 85F and 13.5 psia at a...Ch. 14.7 - An 8-m3 tank contains saturated air at 30C, 105...Ch. 14.7 - Prob. 17PCh. 14.7 - Prob. 18PCh. 14.7 - Prob. 19PCh. 14.7 - Andy and Wendy both wear glasses. On a cold winter...Ch. 14.7 - In summer, the outer surface of a glass filled...Ch. 14.7 - In some climates, cleaning the ice off the...Ch. 14.7 - Prob. 23PCh. 14.7 - Prob. 24PCh. 14.7 - Prob. 25PCh. 14.7 - Prob. 26PCh. 14.7 - A thirsty woman opens the refrigerator and picks...Ch. 14.7 - Prob. 28PCh. 14.7 - The air in a room has a dry-bulb temperature of...Ch. 14.7 - Prob. 31PCh. 14.7 - Prob. 32PCh. 14.7 - How do constant-enthalpy and...Ch. 14.7 - At what states on the psychrometric chart are the...Ch. 14.7 - How is the dew-point temperature at a specified...Ch. 14.7 - Can the enthalpy values determined from a...Ch. 14.7 - Prob. 37PCh. 14.7 - Prob. 39PCh. 14.7 - Prob. 41PCh. 14.7 - Prob. 42PCh. 14.7 - Prob. 43PCh. 14.7 - Prob. 44PCh. 14.7 - What does a modern air-conditioning system do...Ch. 14.7 - How does the human body respond to (a) hot...Ch. 14.7 - Prob. 47PCh. 14.7 - How does the air motion in the vicinity of the...Ch. 14.7 - Consider a tennis match in cold weather where both...Ch. 14.7 - Prob. 50PCh. 14.7 - Prob. 51PCh. 14.7 - Prob. 52PCh. 14.7 - What is metabolism? What is the range of metabolic...Ch. 14.7 - What is sensible heat? How is the sensible heat...Ch. 14.7 - Prob. 55PCh. 14.7 - Prob. 56PCh. 14.7 - Prob. 57PCh. 14.7 - Prob. 58PCh. 14.7 - Repeat Prob. 1459 for an infiltration rate of 1.8...Ch. 14.7 - An average person produces 0.25 kg of moisture...Ch. 14.7 - An average (1.82 kg or 4.0 lbm) chicken has a...Ch. 14.7 - How do relative and specific humidities change...Ch. 14.7 - Prob. 63PCh. 14.7 - Prob. 64PCh. 14.7 - Prob. 65PCh. 14.7 - Humid air at 40 psia, 50F, and 90 percent relative...Ch. 14.7 - Air enters a 30-cm-diameter cooling section at 1...Ch. 14.7 - Prob. 68PCh. 14.7 - Prob. 69PCh. 14.7 - Why is heated air sometimes humidified?Ch. 14.7 - Air at 1 atm, 15C, and 60 percent relative...Ch. 14.7 - Prob. 72PCh. 14.7 - An air-conditioning system operates at a total...Ch. 14.7 - Prob. 74PCh. 14.7 - Why is cooled air sometimes reheated in summer...Ch. 14.7 - Prob. 76PCh. 14.7 - Prob. 77PCh. 14.7 - Air enters a 40-cm-diameter cooling section at 1...Ch. 14.7 - Repeat Prob. 1479 for a total pressure of 88 kPa...Ch. 14.7 - Prob. 81PCh. 14.7 - Prob. 83PCh. 14.7 - Prob. 84PCh. 14.7 - Prob. 85PCh. 14.7 - Atmospheric air at 1 atm, 32C, and 95 percent...Ch. 14.7 - Prob. 88PCh. 14.7 - Prob. 89PCh. 14.7 - Does an evaporation process have to involve heat...Ch. 14.7 - Prob. 93PCh. 14.7 - Prob. 94PCh. 14.7 - Air at 1 atm, 20C, and 70 percent relative...Ch. 14.7 - Two unsaturated airstreams are mixed...Ch. 14.7 - Consider the adiabatic mixing of two airstreams....Ch. 14.7 - Prob. 98PCh. 14.7 - Two airstreams are mixed steadily and...Ch. 14.7 - A stream of warm air with a dry-bulb temperature...Ch. 14.7 - Prob. 104PCh. 14.7 - How does a natural-draft wet cooling tower work?Ch. 14.7 - What is a spray pond? How does its performance...Ch. 14.7 - The cooling water from the condenser of a power...Ch. 14.7 - Prob. 108PCh. 14.7 - A wet cooling tower is to cool 60 kg/s of water...Ch. 14.7 - Prob. 110PCh. 14.7 - Prob. 111PCh. 14.7 - Prob. 112PCh. 14.7 - Prob. 113RPCh. 14.7 - Prob. 114RPCh. 14.7 - Prob. 115RPCh. 14.7 - Prob. 116RPCh. 14.7 - Prob. 117RPCh. 14.7 - Prob. 118RPCh. 14.7 - Prob. 119RPCh. 14.7 - Prob. 120RPCh. 14.7 - 14–121 The relative humidity inside dacha of Prob....Ch. 14.7 - Prob. 122RPCh. 14.7 - Prob. 124RPCh. 14.7 - 14–126E Air at 15 psia, 60°F, and 70 percent...Ch. 14.7 - Prob. 127RPCh. 14.7 - Air enters a cooling section at 97 kPa, 35C, and...Ch. 14.7 - Prob. 129RPCh. 14.7 - Humid air at 101.3 kPa, 36C dry bulb and 65...Ch. 14.7 - 14–131 Air enters an air-conditioning system that...Ch. 14.7 - Prob. 132RPCh. 14.7 - Prob. 133RPCh. 14.7 - Conditioned air at 13C and 90 percent relative...Ch. 14.7 - Prob. 138RPCh. 14.7 - A room is filled with saturated moist air at 25C...Ch. 14.7 - Prob. 141FEPCh. 14.7 - A 40-m3 room contains air at 30C and a total...Ch. 14.7 - Prob. 143FEPCh. 14.7 - The air in a house is at 25C and 65 percent...Ch. 14.7 - On the psychrometric chart, a cooling and...Ch. 14.7 - On the psychrometric chart, a heating and...Ch. 14.7 - An airstream at a specified temperature and...Ch. 14.7 - Prob. 148FEPCh. 14.7 - Air at a total pressure of 90 kPa, 15C, and 75...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
The Refrigeration Cycle Explained - The Four Major Components; Author: HVAC Know It All;https://www.youtube.com/watch?v=zfciSvOZDUY;License: Standard YouTube License, CC-BY