Concept explainers
BIO ULTRASOUND IMAGING. A typical ultrasound transducer used for medical diagnosis produces a beam of ultrasound with a frequency of 1.0 MHz. The beam travels from the transducer through tissue and partially reflects when it encounters different structures in the tissue. The same transducer that produces the ultrasound also detects the reflections. The transducer emits a short pulse of ultrasound and waits to receive the reflected echoes before emitting the next pulse. By measuring the time between the initial pulse and the arrival of the reflected signal, we can use the speed of ultrasound in tissue, 1540 m/s, to determine the distance from the transducer to the structure that produced the reflection.
As the ultrasound beam passes through tissue, the beam is attenuated through absorption. Thus deeper structures return weaker echoes. A typical attenuation in tissue is −100 dB/m · MHz; in bone it is −500 dB/m · MHz. In determining attenuation, we take the reference intensity to be the intensity produced by the transducer.
16.77 If the deepest structure you wish to image is 10.0 cm from the transducer, what is the maximum number of pulses per second that can be emitted? (a) 3850; (b) 7700; (c) 15,400; (d) 1,000,000.
16.78 After a beam passes through 10 cm of tissue, what is the beam’s intensity as a fraction of its initial intensity from the transducer? (a) 1 × 10−11; (b) 0.001; (c) 0.01; (d) 0.1.
Want to see the full answer?
Check out a sample textbook solutionChapter 16 Solutions
University Physics (14th Edition)
Additional Science Textbook Solutions
Lecture- Tutorials for Introductory Astronomy
College Physics (10th Edition)
Essential University Physics: Volume 1 (3rd Edition)
The Cosmic Perspective Fundamentals (2nd Edition)
Life in the Universe (4th Edition)
Tutorials in Introductory Physics
- Ultrasound is used in medicine both for diagnostic imaging (Fig. P17.9, page 526) and for therapy. For diagnosis, short pulses of ultrasound are passed through the patients body. An echo reflected from a structure of interest is recorded, and the distance to the structure can be determined from the time delay for the echos return. To reveal detail, the wavelength of the reflected ultrasound must be small compared to the size of the object reflecting the wave. The speed of ultrasound in human tissue is about 1 500 m/s (nearly the same as the speed of sound in water). (a) What is the wavelength of ultrasound with a frequency of 2.40 MHz? (b) In the whole set of imaging techniques, frequencies in the range 1.00 MHz to 20.0 MHz are used. What is the range of wavelengths corresponding to this range of frequencies?arrow_forwardA sinusoidal wave travels down a taut, horizontal string with a linear mass density of =0.060 kg/m. The magnitude of maximum vertical acceleration of the wave is aymax=0.90 cm/s2 and the amplitude of the wave is 0.40 m. The string is under a tension of FT=600.00 N. The wave moves in the negative x-direction. Write an equation to model the wave.arrow_forwardConsider a diagnostic ultrasound of frequency 5.00 MHz that is used to examine an irregularity in soft tissue. (a) What is the wavelength in air of such a sound wave if the speed of sound is 343 m/s? (b) If the speed of sound in tissue is 1800 m/s, what is the wavelength of this wave in tissue?arrow_forward
- Write an expression that describes the pressure variation as a function of position and time for a sinusoidal sound wave in air. Assume the speed of sound is 343 m/s, = 0.100 m, and Pmax = 0.200 Pa.arrow_forwardThe area of a typical eardrum is about 5.00 X 10-5 m2. (a) (Calculate the average sound power incident on an eardrum at the threshold of pain, which corresponds to an intensity of 1.00 W/m2. (b) How much energy is transferred to the eardrum exposed to this sound lor 1.00 mill?arrow_forwardA skyrocket explodes 100 m above the ground (Fig. P14.24). Three observers are spaced 100 m apart, with the first (A) directly under the explosion. (a) What is the ratio of the sound intensity heard by observer A to that heard by observer B? (b) What is the ratio of the intensity heard by observer A to that heard by observer C? Figure P14.24arrow_forward
- A fireworks rocket explodes at a height of 100 m above the ground. An observer on the ground directly under the explosion experiences an average sound intensity of 7.00 102 W/m2 for 0.200 s. (a) What is the total amount of energy transferred away from the explosion by sound? (b) What is the sound level (in decibels) heard by the observer?arrow_forwardA person wears a hearing aid that uniformly increases the intensity level of all audible frequencies of sound by 30.0 dB. The hearing aid picks up sound having a frequency of 250 Hz at an intensity of 3.0 1011 W/m2. What is the intensity delivered to the eardrum?arrow_forwardA tuning fork is known to vibrate with frequency 262 Hz. When it is sounded along with a mandolin siring, four beats are heard every second. Next, a bit of tape is put onto each line of the tuning fork, and the tuning fork now produces five beats per second with the same mandolin siring. What is the frequency of the string? (a) 257 Hz (b) 258 Hz (c) 262 Hz (d) 266 Hz (e) 267 Hzarrow_forward
- A church bell in a steeple rings once. At 300 m in from of the church, the maximum sound intensity is 2 W/m2. At 950 in behind the church, the maximum intensity is 0.2 W/m2. What is the main reason for the difference in the intensity? (a) Most of the sound is absorbed by the air before it gels far away from the source, (b) Most of the sound is absorbed by the ground as it travels away from the source, (c) The bell broadcasts the sound mostly toward the front, (d) At a larger distance, the power is spread over a larger area.arrow_forwardA driver travels northbound on a highway at a speed of 25.0 m/s. A police car. traveling southbound at a speed of 40.0 m/s. approaches with its siren producing sound at a frequency of 2 500 Hz. (a) What frequency does the driver observe as the police car approaches? (b) What frequency does the driver detect after the police car passes him? (c) Repeat parts (a) and (b) for the case when the police car is behind the driver and travels northbound.arrow_forward(a) What is the intensity of a sound that has a level 7.00 dB lower than a 4.00109W/m2 sound? (b) What is the intensity of a sound that is 3.00 dB higher than a 4.00109W/m2 sound?arrow_forward
- Principles of Physics: A Calculus-Based TextPhysicsISBN:9781133104261Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPhysics for Scientists and Engineers, Technology ...PhysicsISBN:9781305116399Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningUniversity Physics Volume 1PhysicsISBN:9781938168277Author:William Moebs, Samuel J. Ling, Jeff SannyPublisher:OpenStax - Rice University
- Physics for Scientists and EngineersPhysicsISBN:9781337553278Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPhysics for Scientists and Engineers with Modern ...PhysicsISBN:9781337553292Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningCollege PhysicsPhysicsISBN:9781285737027Author:Raymond A. Serway, Chris VuillePublisher:Cengage Learning