EBK VECTOR MECH...,COMBINED
EBK VECTOR MECH...,COMBINED
11th Edition
ISBN: 9780077687434
Author: BEER
Publisher: MCGRAW-HILL HIGHER EDUCATION
bartleby

Concept explainers

bartleby

Videos

Question
Book Icon
Chapter 17.1, Problem 17.20P

(a)

To determine

The angular velocity of gymnast and the force exerted on his hands after he has rotated through θ=90°.

(a)

Expert Solution
Check Mark

Answer to Problem 17.20P

The angular velocity of gymnast and the force exerted on his hands after he has rotated through θ=90° is 3.94rad/s_.

The force exerted on gymnast’s hands after he has rotated through θ=90° is 271lb_.

Explanation of Solution

Given information:

The weight (W) of the gymnast is 160 lb.

The centroidal radius of gyration (k¯) of gymnast’s body is 1.5 ft.

Calculation:

Find the mass (m) of the gymnast using the equation:

m=Wg

Here, g is the acceleration due to gravity.

Substitute 160 lb for W.

m=16032.2=4.9689lbs2/ft

Find the mass moment of inertia (I¯) using the equation:

I¯=12mk2

Substitute 4.9689lbs2/ft for m and 1.5 ft for k.

I¯=12(4.9689)(1.5)2=5.59lbs2ft

Consider position 1 of the gymnast is directly above the bar.

The elevation (h1) of at position 1 is 3.5 ft.

Find the potential energy (V1) of the gymnast at position 1 using the equation:

V1=Wh1

Substitute 160 lb for W, and 3.5 ft for h1.

V1=(160)(3.5)=560ftlb

At initial position, the gymnast is at rest. Therefore, the velocity (v¯1), angular velocity (ω1), and kinetic energy (T1) of the gymnast are zero.

Consider position 2 of the gymnast in which the body of gymnast at level of bar after rotating 90°.

Sketch the free body diagram and kinetic diagram of the position 2 as shown in Figure (1).

EBK VECTOR MECH...,COMBINED, Chapter 17.1, Problem 17.20P , additional homework tip  1

Refer Figure (1),

At the position 2, the body is in horizontal. Therefore, potential energy (V1) at position 2 is zero.

Find the equation of velocity (v¯2) of gymnast at position 2.

v¯2=h1ω2

Substitute 3.5 ft for h1.

v¯2=3.5ω2

Write the equation of kinetic energy (T2) of the gymnast at position 2.

T2=12mv¯22+I¯ω22

Substitute 4.9689lbs2/ft for m, 3.5ω2 for v¯2 and 5.59lbs2ft for I¯.

T2=12(4.9689)(3.5ω2)2+(5.59)ω22=36.025ω22

Apply the Principle of conservation of energy.

T1+V1=T2+V2

Substitute 0 for T1, 560lbft for V1, 36.025ω22 for T2, and 0 for V2.

0+560=36.025ω22+0ω2=3.94rad/s

Thus, the angular velocity of gymnast and the force exerted on his hands after he has rotated through θ=90° is 3.94rad/s_.

Refer Figure (2),

Find the acceleration (at) of gymnastic along horizontal axis using kinematics.

at=hα

Here, α is the angular acceleration of gymnast.

Substitute 3.5 ft for h.

at=3.5α

Find the acceleration (at) of gymnastic along vertical axis using kinematics.

an=hω22

Substitute 3.5 ft for h and 3.94rad/s for ω2.

an=(3.5)(3.94)2=54.3326ft/s2

Take moment about mass canter O.

ΣMO=Σ(M0)effmgh=math+mk2αgh=ath+k2α

Substitute 32.2ft/s2 fo g, 3.5α for at, 3.5 ft for h, and 1.5 ft for α.

32.2(3.5)=(3.5α)(3.5)+(1.5)2α112.7=12.25α+2.25αα=7.7724rad/s2

Find the horizontal force (Rx) exerted on gymnast’s hands after he has rotated through θ=90°.

Consider equilibrium along horizontal axis.

Rx=man

Substitute 4.9689lbs2/ft for m and 54.3326ft/s2 for an.

Rx=(4.9689)(54.3326)=270lb

Find the vertical force (Rx) exerted on gymnast’s hands after he has rotated through θ=90°.

Consider equilibrium along vertical axis.

Rymg=mat

Substitute 3.5α for at.

Rymg=m(3.5α)

Substitute 4.9689lbs2/ft for m, 32.2ft/s2 for g, and 7.7724rad/s2 for α.

Ry(4.9689)(32.2)=(4.9689)(3.5×7.7724)Ry=24.83lb

Find the force (R) exerted on gymnast’s hands after he has rotated through θ=90° using the equation:

R=Rx2+Ry2

Substitute 270lb for Rx and 24.83lb for Ry.

R=2702+24.832=271lb

Thus, the force exerted on gymnast’s hands after he has rotated through θ=90° is 271lb_.

(b)

To determine

The angular velocity of gymnast and the force exerted on his hands after he has rotated through θ=180°.

(b)

Expert Solution
Check Mark

Answer to Problem 17.20P

The angular velocity of gymnast and the force exerted on his hands after he has rotated through θ=180° is 5.58rad/s_.

The force exerted on gymnast’s hands after he has rotated through θ=180° is 701lb_.

Explanation of Solution

Calculation:

Consider position 3 of the gymnast is directly below the bar after rotating 180°.

The elevation (h1) of at position 3 is 3.5ft.

Find the potential energy (V1) of the gymnast at position 3 using the equation:

V3=Wh3

Substitute 160 lb for W, and 3.5ft for h1.

V3=(160)(3.5)=560ftlb

At initial position, the gymnast is at rest. Therefore, the velocity (v¯1), angular velocity (ω1), and kinetic energy (T1) of the gymnast are zero.

Consider position 2 of the gymnast in which the body of gymnast at level of bar after rotating 90°.

Sketch the free body diagram and kinetic diagram of the position 3 as shown in Figure 2.

EBK VECTOR MECH...,COMBINED, Chapter 17.1, Problem 17.20P , additional homework tip  2

Refer Figure (2),

Find the equation of velocity (v¯2) of gymnast at position 3.

v¯3=h3ω3

Substitute 3.5 ft for h3.

v¯2=3.5ω2

Write the equation of kinetic energy (T2) of the gymnast at position 2.

T2=12mv¯22+I¯ω22

Substitute 4.9689lbs2/ft for m, 3.5ω2 for v¯2 and 5.59lbs2ft for I¯.

T2=12(4.9689)(3.5ω2)2+(5.59)ω22=36.025ω22

Find the angular velocity (ω3) of gymnast and the force exerted on his hands after he has rotated through θ=180°.

Apply the Principle of conservation of energy.

T1+V1=T3+V3

Substitute 0 for T1, 560lbft for V1, 36.025ω22 for T3, and 560ftlb for V3.

0+560=36.025ω32560ω3=5.58rad/s

Thus, the angular velocity of gymnast and the force exerted on his hands after he has rotated through θ=180° is 5.58rad/s_.

Refer Figure (2),

The acceleration (at) of gymnastic along horizontal axis at position 3 is zero.

at=0

Find the acceleration (at) of gymnastic along vertical axis using kinematics.

an=hω32

Substitute 3.5 ft for h and 5.58rad/s for ω2.

an=(3.5)(5.58)2=108.98ft/s2

Find the horizontal force (Rx) exerted on gymnast’s hands after he has rotated through θ=180°

Consider equilibrium along horizontal axis.

Rx=mat

Substitute 0 for at.

Rx=m(0)=0

Find the vertical force (Rx) exerted on gymnast’s hands after he has rotated through θ=180°

Consider equilibrium along vertical axis.

Rymg=man

Substitute 4.9689lbs2/ft for m, 32.2ft/s2 for g, and 108.98ft/s2 for an.

Ry(4.9689)(32.2)=(4.9689)(108.98)Ry701lb

Find the force (R) exerted on gymnast’s hands after he has rotated through θ=180° using the equation:

R=Rx2+Ry2

Substitute 0 for Rx and 701lb for Ry.

R=02+7012=701lb

Thus, the force exerted on gymnast’s hands after he has rotated through θ=180° is 701lb_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Chapter 17 Solutions

EBK VECTOR MECH...,COMBINED

Ch. 17.1 - PROBLEM 17.6 The flywheel of a punching machine...Ch. 17.1 - Prob. 17.7PCh. 17.1 - Prob. 17.8PCh. 17.1 - The 10-in.-radius brake drum is attached to a...Ch. 17.1 - Prob. 17.10PCh. 17.1 - Prob. 17.11PCh. 17.1 - Prob. 17.12PCh. 17.1 - Prob. 17.13PCh. 17.1 - The double pulley shown has a mass of 15 kg and a...Ch. 17.1 - Gear A has a mass of 1 kg and a radius of gyration...Ch. 17.1 - Prob. 17.16PCh. 17.1 - Prob. 17.17PCh. 17.1 - A slender 9-lb rod can rotate in a vertical plane...Ch. 17.1 - An adapted golf device attaches to a wheelchair to...Ch. 17.1 - Prob. 17.20PCh. 17.1 - A collar with a mass of 1 kg is rigidly attached...Ch. 17.1 - A collar with a mass of 1 kg is rigidly attached...Ch. 17.1 - Two identical slender rods AB and BC are welded...Ch. 17.1 - Prob. 17.24PCh. 17.1 - Prob. 17.25PCh. 17.1 - Prob. 17.26PCh. 17.1 - Greek engineers had the unenviable task of moving...Ch. 17.1 - A small sphere of mass m and radius r is released...Ch. 17.1 - Prob. 17.29PCh. 17.1 - A half-cylinder with mass m and radius r is...Ch. 17.1 - Prob. 17.31PCh. 17.1 - Two uniform cylinders, each of weight W = 14 lb...Ch. 17.1 - Prob. 17.33PCh. 17.1 - A bar of mass m = 5 kg is held as shown between...Ch. 17.1 - The 1.5-kg uniform slender bar AB is connected to...Ch. 17.1 - The motion of the uniform rod AB is guided by...Ch. 17.1 - Prob. 17.37PCh. 17.1 - Prob. 17.38PCh. 17.1 - The ends of a 9-lb rod AB are constrained to move...Ch. 17.1 - The mechanism shown is one of two identical...Ch. 17.1 - The mechanism shown is one of two identical...Ch. 17.1 - Each of the two rods shown is of length L = 1 m...Ch. 17.1 - The 4-kg rod AB is attached to a collar of...Ch. 17.1 - If in Prob. 17.43 the angular velocity of the...Ch. 17.1 - 17.45 The uniform rods AB and BC weigh 2.4 kg and...Ch. 17.1 - The uniform rods AB and BC weigh 2.4 kg and 4 kg,...Ch. 17.1 - The 80-mm-radius gear shown has a mass of 5 kg and...Ch. 17.1 - Prob. 17.48PCh. 17.1 - Three shafts and four gears are used to form a...Ch. 17.1 - Prob. 17.50PCh. 17.1 - Prob. 17.51PCh. 17.2 - The 350-kg flywheel of a small hoisting engine has...Ch. 17.2 - Prob. 17.2IMDCh. 17.2 - Prob. 17.3IMDCh. 17.2 - Prob. 17.52PCh. 17.2 - Prob. 17.53PCh. 17.2 - Prob. 17.54PCh. 17.2 - A uniform 144-lb cube is attached to a uniform...Ch. 17.2 - Prob. 17.56PCh. 17.2 - Prob. 17.57PCh. 17.2 - Prob. 17.58PCh. 17.2 - Prob. 17.59PCh. 17.2 - Each of the double pulleys shown has a centroidal...Ch. 17.2 - Each of the gears A and B has a mass of 675 g and...Ch. 17.2 - Prob. 17.62PCh. 17.2 - Prob. 17.63PCh. 17.2 - Prob. 17.64PCh. 17.2 - Prob. 17.65PCh. 17.2 - Show that, when a rigid body rotates about a fixed...Ch. 17.2 - Prob. 17.68PCh. 17.2 - A flywheel is rigidly attached to a 1.5-in.-radius...Ch. 17.2 - A wheel of radius r and centroidal radius of...Ch. 17.2 - Prob. 17.71PCh. 17.2 - 17.72 and 17.73 A 9-in.·radius cylinder of weight...Ch. 17.2 - 17.72 and 17.73 A 9-in.·radius cylinder of weight...Ch. 17.2 - Two uniform cylinders, each of mass m = 6 kg and...Ch. 17.2 - Prob. 17.75PCh. 17.2 - Prob. 17.76PCh. 17.2 - A sphere of radius r and mass m is projected along...Ch. 17.2 - A bowler projects an 8.5-in.-diameter ball...Ch. 17.2 - Prob. 17.79PCh. 17.2 - A satellite has a total weight (on Earth) of 250...Ch. 17.2 - Two 10-lb disks and a small motor are mounted on a...Ch. 17.2 - Prob. 17.82PCh. 17.2 - Prob. 17.83PCh. 17.2 - Prob. 17.84PCh. 17.2 - Prob. 17.85PCh. 17.2 - Prob. 17.86PCh. 17.2 - Prob. 17.87PCh. 17.2 - Prob. 17.88PCh. 17.2 - A 1.8-kg collar A and a 0.7-kg collar B can slide...Ch. 17.2 - Prob. 17.90PCh. 17.2 - A small 4-lb collar C can slide freely on a thin...Ch. 17.2 - Rod AB has a weight of 6 lb and is attached to a...Ch. 17.2 - Prob. 17.93PCh. 17.2 - Prob. 17.94PCh. 17.2 - The 6-lb steel cylinder A of radius r and the...Ch. 17.3 - A uniform slender rod AB of mass m is at rest on a...Ch. 17.3 - Prob. 17.5IMDCh. 17.3 - Prob. 17.6IMDCh. 17.3 - At what height h above its center G should a...Ch. 17.3 - A bullet weighing 0.08 lb is fired with a...Ch. 17.3 - In Prob. 17.97, determine (a) the required...Ch. 17.3 - A 16-lb wooden panel is suspended from a pin...Ch. 17.3 - Prob. 17.100PCh. 17.3 - A 45-g bullet is fired with a velocity of 400 m/s...Ch. 17.3 - A 45-g bullet is fired with a velocity of 400 m/s...Ch. 17.3 - Prob. 17.103PCh. 17.3 - Prob. 17.104PCh. 17.3 - Prob. 17.105PCh. 17.3 - A uniform slender rod AB is at rest on a...Ch. 17.3 - A bullet of mass m is fired with a horizontal...Ch. 17.3 - Determine the height h at which the bullet of...Ch. 17.3 - A uniform slender bar of length L = 200 mm and...Ch. 17.3 - A uniform slender rod of length L is dropped onto...Ch. 17.3 - A uniform slender rod AB has a mass m, a length L,...Ch. 17.3 - 17.113 The slender rod AB of length L = 1 m forms...Ch. 17.3 - The trapeze/lanyard air drop (t/LAD) launch is a...Ch. 17.3 - The uniform rectangular block shown is moving...Ch. 17.3 - The 40-kg gymnast drops from her maximum height of...Ch. 17.3 - Prob. 17.117PCh. 17.3 - Prob. 17.118PCh. 17.3 - A 1-oz bullet is fired with a horizontal velocity...Ch. 17.3 - For the beam of Prob. 17.119, determine the...Ch. 17.3 - Prob. 17.121PCh. 17.3 - Prob. 17.122PCh. 17.3 - A slender rod AB is released from rest in the...Ch. 17.3 - Prob. 17.124PCh. 17.3 - Block A has a mass m and is attached to a cord...Ch. 17.3 - Prob. 17.126PCh. 17.3 - 17.127 and 17.128Member ABC has a mass of 2.4 kg...Ch. 17.3 - 17.127 and 17.128Member ABC has a mass of 2.4 kg...Ch. 17.3 - Prob. 17.129PCh. 17.3 - Prob. 17.130PCh. 17.3 - A small rubber ball of radius r is thrown against...Ch. 17.3 - Sphere A of mass m and radius r rolls without...Ch. 17.3 - In a game of pool, ball A is rolling without...Ch. 17 - A uniform disk, initially at rest and of constant...Ch. 17 - The 8-in.-radius brake drum is attached to a...Ch. 17 - A uniform slender rod is placed at corner B and is...Ch. 17 - The motion of the slender 250-mm rod AB is guided...Ch. 17 - Prob. 17.141RPCh. 17 - Disks A and B are made of the same material, are...Ch. 17 - Disks A and B are made of the same material, are...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Dynamics - Lesson 1: Introduction and Constant Acceleration Equations; Author: Jeff Hanson;https://www.youtube.com/watch?v=7aMiZ3b0Ieg;License: Standard YouTube License, CC-BY