Concept explainers
In a chemical processing plant, a reaction chamber of fixed volume V0 is connected to a reservoir chamber of fixed volume 4V0 by a passage containing a thermally insulating porous plug. The plug permits the chambers to be at different temperatures. The plug allows gas to pass from either chamber to the other, ensuring that the pressure is the same in both. At one point in the processing, both chambers contain gas at a pressure of 1.00 atm and a temperature of 27.0°C. Intake and exhaust valves to the pair of chambers are closed. The reservoir is maintained at 27.0°C while the reaction chamber is heated to 400°C. What is the pressure in both chambers after that is done?
Trending nowThis is a popular solution!
Chapter 19 Solutions
Physics for Scientists and Engineers, Technology Update (No access codes included)
- For a temperature increase of 10 at constant volume, what is the heat absorbed by (a) 3.0 mol of a dilute monatomic gas; (b) 0.50 mol of a dilute diatomic gas; and (c) 15 mol of a dilute polyatomic gas?arrow_forwardAn aluminum rod 0.500 m in length and with a cross-sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 300 K. (a) If one-half of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool. (b) If the circular surface of the upper end of the rod is maintained at 300 K, what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 W/m K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)arrow_forwardIn a chemical processing plant, a reaction chamber of fixed volume V0 is connected to a reservoir chamber of fixed volume 4V0 by a passage containing a thermally insulating porous plug. The plug permits the chambers to be at different temperatures. The plug allows gas to pass from either chamber to the other, ensuring that the pressure is the same in both. At one point in the processing, both chambers contain gas at a pressure of 1.00 atm and a temperature of 27.0C. Intake and exhaust valves to the pair of chambers are closed. The reservoir is maintained at 27.0C while the reaction chamber is heated to 400C. What is the pressure in both chambers after that is done?arrow_forward
- A certain ideal gas has a molar specific heat of Cv = 72R. A 2.00-mol sample of the gas always starts at pressure 1.00 105 Pa and temperature 300 K. For each of the following processes, determine (a) the final pressure, (b) the final volume, (c) the final temperature, (d) the change in internal energy of the gas, (e) the energy added to the gas by heat, and (f) the work done on the gas. (i) The gas is heated at constant pressure to 400 K. (ii) The gas is heated at constant volume to 400 K. (iii) The gas is compressed at constant temperature to 1.20 105 Pa. (iv) The gas is compressed adiabatically to 1.20 105 Pa.arrow_forwardTwo 5-cm-diameter, 15-cm-long aluminum bars (k = 176 W/m·K) with ground surfaces are pressed against each other with a pressure of 20 atm. The bars are enclosed in an insulation sleeve and, thus, heat transfer from the lateral surfaces is negligible. If the top and bottom surfaces of the two-bar system are maintained at temperatures of 150°C and 20°C, respectively, determine (a) the rate of heat transfer along the cylinders under steady conditions and (b) the temperature drop at the interface.arrow_forwardBefore beginning a long trip on a hot day, a driver inflates an automobile tire to a gauge pressure of 1.57 atm at 300 K. At the end of the trip, the gauge pressure has increased to 2.07 atm. (a) Assuming the volume has remained constant, what is the temperature of the air inside the tire? K(b) What percentage of the original mass of air in the tire should be released so the pressure returns to its original value? Assume the temperature remains at the value found in part (a) and the volume of the tire remains constant as air is released. %arrow_forward
- Consider a well-insulated horizontal rigid cylinder that is divided into two compartments by a piston that is free to move, but does not allow either gas to leak into the other side. Initially, one side of the piston contains 1 m3 of N2 gas at 500 kPa and 120°C while the other side contains 1 m3 of He gas at 500 kPa and 40°C. Now thermal equilibrium is established in the cylinder as a result of heat transfer through the piston. Using constant specific heats at room temperature, determine the final equilibrium temperature in the cylinder. What would your answer be if the piston were not free to move?arrow_forwardConsider the two-sided chamber shown, where the right half has a volume of V = 490 L and the left half has a volume of 2V. The chamber has a seal that separates the right from the left half. The chamber is sealed and an ideal gas is pumped into the right side at a pressure P = 3.2 atm and temperature T = 72° C. The seal between the two sides is then opened. If the physical temperature decreases by a factor of 2 while the gas fills the chamber, what is the new pressure, in kilopascals?arrow_forwardA large freshwater fish has a swim bladder with a volume of 5.0×10−4 m3 . The fish descends from a depth where the absolute pressure is 3.0 atm to deeper water where the swim bladder is compressed to 60% of its initial volume. As the fish descends, the gas pressure in the swim bladder is always equal to the water pressure, and the temperature of the gas remains at the internal temperature of the fish's body. To adapt to its new location, the fish must add gas to reinflate its swim bladder to the original volume. This takes energy to accomplish. Part A What's the minimum amount of work required to expand the swim bladder back to its original volume? Express your answer to two significant figures and include the appropriate units.arrow_forward
- Consider the two-sided chamber shown,where the right half has a volume of V = 490 L and the left half has a volume of 2V. The chamber has a seal which separates the right from the left half. The chamber is sealed and an ideal gas is pumped into the right side at a pressure P = 3.2 atm and temperature T = 72° C. The seal between the two sides is then opened. (A) If the physical temperature decreases by a factor of 2 while the gas fills the chamber, what is the new pressure, in kilopascals? (B)The chamber is then sealed again, trapping 2/3 of the gas molecules in the left side. The temperature of the left side is then doubled, back to the original temperature T. What is the pressure in the left side of the chamber now, in kilopascals?arrow_forwardConsider the two-sided chamber shown,where the right half has a volume of V = 490 L and the left half has a volume of 2V. The chamber has a seal which separates the right from the left half. The chamber is sealed and an ideal gas is pumped into the right side at a pressure P = 3.2 atm and temperature T = 72° C. The seal between the two sides is then opened. (A) If the physical temperature decreases by a factor of 2 while the gas fills the chamber, what is the new pressure, in kilopascals? (B) The chamber is then sealed again, trapping 2/3 of the gas molecules in the left side. The temperature of the left side is then doubled, back to the original temperature T. What is the pressure in the left side of the chamber now, in kilopascals?arrow_forwardA cylinder contains 0.100 mol of an ideal monatomic gas. Initially, the gas is at a pressure of 1.00 x 10^5 Pa and occupies a volume of 2.50 x 10^ -3 cubic meter. If the gas is allowed to expand to twice the initial volume, what is the final temperature if the expansion is adiabatic? A. 289 K B. 89 K C. 189 K D. 389 Karrow_forward
- Principles of Physics: A Calculus-Based TextPhysicsISBN:9781133104261Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPhysics for Scientists and Engineers, Technology ...PhysicsISBN:9781305116399Author:Raymond A. Serway, John W. JewettPublisher:Cengage Learning
- Physics for Scientists and Engineers: Foundations...PhysicsISBN:9781133939146Author:Katz, Debora M.Publisher:Cengage Learning