Physics for Scientists and Engineers, Technology Update, Hybrid Edition (with Enhanced WebAssign Multi-Term LOE Printed Access Card for Physics)
Physics for Scientists and Engineers, Technology Update, Hybrid Edition (with Enhanced WebAssign Multi-Term LOE Printed Access Card for Physics)
9th Edition
ISBN: 9781305116429
Author: Raymond A. Serway, John W. Jewett
Publisher: Cengage Learning
bartleby

Videos

Textbook Question
Book Icon
Chapter 20, Problem 20.61AP

An aluminum rod 0.500 m in length and with a cross sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 3(H) K. (a) If one-halt of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool, (b) If the circular surface of the upper end of the rod is maintained at 300 K. what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 YV/m · K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)

(a)

Expert Solution
Check Mark
To determine

The volume of helium boil off by the time the inserted half cools is 4.20K .

Answer to Problem 20.61AP

The volume of helium boil off by the time the inserted half cools to 4.20K is 17.2L .

Explanation of Solution

Given info: The length of the aluminum rod is 0.500m , the cross sectional area of the aluminum rod is 2.50cm2 , the initial temperature of the aluminum rod is 300K and the final temperature of the aluminum rod and helium is 4.20K .

Write the expression for the mass of the substance.

m=ρV (1)

Here,

ρ is the density of the aluminum.

V is the volume of the rod.

The expression for the volume of the rod is,

V=Al

Here,

A is the area of the rod.

l is the length of the rod.

Substitute Al for V in above equation.

m=ρAl

For the mass of the aluminum rod:

Substitute mAl for m , 2700kg/m3 for ρ and 0.500m for l and 2.50cm2 for A in the above equation.

mAl=(2700kg/m3)(2.50cm2×104m21cm2)(0.500m2)=0.16875kg

Thus, the mass of the aluminum rod is 0.16875kg .

For the mass of the helium:

Substitute mHe for m , and 125kg/m3 for ρ in the equation (1).

mHe=125kg/m3VHe

Here,

VHe is the volume of the helium.

Write the expression for the amount of heat lost by the aluminum rod due to the change in temperature.

QAl=mAlcAl(TiTf)

Here,

mAl is the mass of the aluminum rod.

cAl is the specific heat of the aluminum rod.

Tf is the final temperature of the aluminum rod.

Ti is the initial temperature of the aluminum rod.

Substitute 0.16875kg for mAl , 900J/kgK for cAl , 4.20K for Tf and 300K for Ti in above equation.

QAl=(0.16875kg)(900J/kgK)((300K4.20K))=44924.625J

Thus, the heat lost by the aluminum rod is 44924.625J .

Write the expression for the heat gained by the helium.

QHe=mHeLHe

Here,

mHe is the mass of the helium.

LHe is the latent heat of the helium.

Substitute 125kg/m3VHe for mHe and 2.09×104J/kg for LHe in the above equation.

QHe=(125kg/m3VHe)(2.09×104J/kg)=2612500VHe

From the law of the conservation of energy, the heat lost is equal to the heat gained.

Write the expression for the heat lost by the aluminum rod is equal to the heat gained by the helium.

QHe=QAl

Substitute 2612.5VHe for QHe and 44924.625J for QAl in the above equation.

2612500VHe=44924.625JVHe0.0172m3×1000L1m3=17.2L

Thus, the volume of helium boil off by the time the inserted half cools to 4.20K is 17.2L .

Conclusion:

Therefore, the volume of helium boil off by the time the inserted half cools to 4.20K is 17.2L .

(b)

Expert Solution
Check Mark
To determine

The boil off rate of liquid helium when the lower half reached 4.20K .

Answer to Problem 20.61AP

The boil off rate of liquid helium when the lower half reached 4.20K is 0.351L/s .

Explanation of Solution

Given info: The length of the aluminum rod is 0.500m , the cross sectional area of the aluminum rod is 2.50cm2 , the initial temperature of the aluminum rod is 300K and the final temperature of the aluminum rod and helium is 4.20K .

Write the expression for the rate at which energy is supplied to the rod.

P=kA(TiTfdx)

Here,

k is the thermal conductivity of aluminum.

A is the cross sectional area of the aluminum rod.

dx is the change in length of the aluminum rod.

Substitute 3100W/m for k , 2.50cm2 for A , 0.5002m for dx , 4.20K for Tf and 300K for Ti in above equation.

P=(3100W/m)(2.50cm2×104m21cm2)(300K4.20K0.5002m)917W

Thus, the rate at which energy is supplied to the rod is 917W .

Write the expression for the boil off rate of liquid helium after the lower half reaches 4.2K .

R=PρLHe

Substitute 917W for P , 125kg/m3 for ρ and 2.09×104J/kg for LHe in above equation.

R=917W125kg/m3×2.09×104J/kg3.51×104m3/s×1000L1m3=0.351L/s

Conclusion:

Therefore, the boil off rate of liquid helium when the lower half reached 4.20K is 0.351L/s .

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
A 2.00-mol sample of helium gas initially at 300 K, and 0.400 atm is compressed isothermally to 1.20 atm. Noting that the helium behaves as an ideal gas, find (a) the final volume of the gas, (b) the work is done on the gas, and (c) the energy transferred by heat.
Liquid helium has a very low boiling point, 4.2 K, as well as a very low latent heat of vaporization, 2.00 x 104 J/kg. If energy is transferred to a container of liquid helium at the boiling point from an immersed electric heater at a rate of 10.0 W, how long does it take to boil away 2.00 kg of the liquid?
A 50-m-long section of a steam pipe whose outer diameteris 10 cm passes through an open space at 15°C. The averagetemperature of the outer surface of the pipe is measured to be150°C. If the combined heat transfer coefficient on the outer surfaceof the pipe is 20 W/m2·K, determine (a) the rate of heat lossfrom the steam pipe; (b) the annual cost of this energy lost if steamis generated in a natural gas furnace that has an efficiency of 75percent and the price of natural gas is $0.52/therm (1 therm =105,500 kJ); and (c) the thickness of fiberglass insulation(k = 0.035 W/m·K) needed in order to save 90 percent of the heatlost. Assume the pipe temperature to remain constant at 150°C.

Chapter 20 Solutions

Physics for Scientists and Engineers, Technology Update, Hybrid Edition (with Enhanced WebAssign Multi-Term LOE Printed Access Card for Physics)

Ch. 20 - Ethyl alcohol has about one-half the specific heat...Ch. 20 - The specific heat of substance A is greater than...Ch. 20 - Beryllium has roughly one-half the specific heat...Ch. 20 - Prob. 20.9OQCh. 20 - A 100-g piece of copper, initially at 95.0C, is...Ch. 20 - Prob. 20.11OQCh. 20 - If a gas is compressed isothermally, which of the...Ch. 20 - Prob. 20.13OQCh. 20 - If a gas undergoes an isobaric process, which of...Ch. 20 - Prob. 20.15OQCh. 20 - Prob. 20.1CQCh. 20 - You need to pick up a very hot cooking pot in your...Ch. 20 - Prob. 20.3CQCh. 20 - Prob. 20.4CQCh. 20 - Prob. 20.5CQCh. 20 - In 1801, Humphry Davy rubbed together pieces of...Ch. 20 - Prob. 20.7CQCh. 20 - Prob. 20.8CQCh. 20 - Prob. 20.9CQCh. 20 - When camping in a canyon on a still night, a...Ch. 20 - Pioneers stored fruits and vegetables in...Ch. 20 - Prob. 20.12CQCh. 20 - Prob. 20.1PCh. 20 - Consider Joules apparatus described in Figure...Ch. 20 - Prob. 20.3PCh. 20 - The highest waterfall in the world is the Salto...Ch. 20 - What mass of water at 25.0C must be allowed to...Ch. 20 - The temperature of a silver bar rises by 10.0C...Ch. 20 - In cold climates, including the northern United...Ch. 20 - A 50.0-g sample of copper is at 25.0C. If 1 200 J...Ch. 20 - An aluminum cup of mass 200 g contains 800 g of...Ch. 20 - If water with a mass mk at temperature Tk is...Ch. 20 - A 1.50-kg iron horseshoe initially at 600C is...Ch. 20 - An electric drill with a steel drill bit of mass m...Ch. 20 - An aluminum calorimeter with a mass of 100 g...Ch. 20 - A 3.00-g copper coin at 25.0C drops 50.0 m to the...Ch. 20 - Two thermally insulated vessels are connected by a...Ch. 20 - A 50.0-g copper calorimeter contains 250 g of...Ch. 20 - Prob. 20.17PCh. 20 - How much energy is required to change a 40.0-g ice...Ch. 20 - A 75.0-g ice cube at 0C is placed in 825 g of...Ch. 20 - A 3.00-g lead bullet at 30.0C is fired at a speed...Ch. 20 - Steam at 100C is added to ice at 0C. (a) Find the...Ch. 20 - A 1.00-kg Mock of copper at 20.0C is dropped into...Ch. 20 - In an insulated vessel, 250 g of ice at 0C is...Ch. 20 - Prob. 20.24PCh. 20 - An ideal gas is enclosed in a cylinder with a...Ch. 20 - Prob. 20.26PCh. 20 - One mole of an ideal gas is warmed slowly so that...Ch. 20 - (a) Determine the work done on a gas that expands...Ch. 20 - An ideal gas is taken through a quasi-static...Ch. 20 - A gas is taken through the cyclic process...Ch. 20 - Consider the cyclic process depicted in Figure...Ch. 20 - Why is the following situation impossible? An...Ch. 20 - A thermodynamic system undergoes a process in...Ch. 20 - A sample of an ideal gas goes through the process...Ch. 20 - A 2.00-mol sample of helium gas initially at 300...Ch. 20 - (a) How much work is done on the steam when 1.00...Ch. 20 - Prob. 20.37PCh. 20 - One mole of an ideal gas does 3 000 J of work on...Ch. 20 - A 1.00-kg block of aluminum is warmed at...Ch. 20 - In Figure P19.22, the change in internal energy of...Ch. 20 - An ideal gas initially at Pi, Vi, and Ti is taken...Ch. 20 - An ideal gas initially at Pi, Vi, and Ti is taken...Ch. 20 - A glass windowpane in a home is 0.620 cm thick and...Ch. 20 - A concrete slab is 12.0 cm thick and has an area...Ch. 20 - A student is trying to decide what to wear. His...Ch. 20 - The surface of the Sun has a temperature of about...Ch. 20 - The tungsten filament of a certain 100-W lightbulb...Ch. 20 - At high noon, the Sun delivers 1 000 W to each...Ch. 20 - Two lightbulbs have cylindrical filaments much...Ch. 20 - Prob. 20.50PCh. 20 - A copper rod and an aluminum rod of equal diameter...Ch. 20 - A box with a total surface area of 1.20 m2 and a...Ch. 20 - (a) Calculate the R-value of a thermal window made...Ch. 20 - At our distance from the Sun, the intensity of...Ch. 20 - A bar of gold (Au) is in thermal contact with a...Ch. 20 - Prob. 20.56PCh. 20 - Prob. 20.57PCh. 20 - A gas expands from I to Fin Figure P20.58 (page...Ch. 20 - Gas in a container is at a pressure of 1.50 atm...Ch. 20 - Liquid nitrogen has a boiling point of 77.3 K and...Ch. 20 - An aluminum rod 0.500 m in length and with a cross...Ch. 20 - Prob. 20.62APCh. 20 - Prob. 20.63APCh. 20 - Prob. 20.64APCh. 20 - Prob. 20.65APCh. 20 - An ice-cube tray is filled with 75.0 g of water....Ch. 20 - On a cold winter day. you buy roasted chestnuts...Ch. 20 - Prob. 20.68APCh. 20 - An iron plate is held against an iron wheel so...Ch. 20 - Prob. 20.70APCh. 20 - A 40.0-g ice cube floats in 200 g of water in a...Ch. 20 - One mole of an ideal gas is contained in a...Ch. 20 - Review. A 670-kg meteoroid happens to be composed...Ch. 20 - Prob. 20.74APCh. 20 - Prob. 20.75APCh. 20 - Prob. 20.76APCh. 20 - Water in an electric teakettle is boiling. The...Ch. 20 - Prob. 20.78APCh. 20 - Prob. 20.79APCh. 20 - A student measures the following data in a...Ch. 20 - Consider the piston cylinder apparatus shown in...Ch. 20 - A spherical shell has inner radius 3.00 cm and...Ch. 20 - Prob. 20.83CPCh. 20 - (a) The inside of a hollow cylinder is maintained...
Knowledge Booster
Background pattern image
Physics
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.
Similar questions
Recommended textbooks for you
Text book image
Principles of Physics: A Calculus-Based Text
Physics
ISBN:9781133104261
Author:Raymond A. Serway, John W. Jewett
Publisher:Cengage Learning
Text book image
Physics for Scientists and Engineers, Technology ...
Physics
ISBN:9781305116399
Author:Raymond A. Serway, John W. Jewett
Publisher:Cengage Learning
Text book image
Physics for Scientists and Engineers: Foundations...
Physics
ISBN:9781133939146
Author:Katz, Debora M.
Publisher:Cengage Learning
Text book image
University Physics Volume 2
Physics
ISBN:9781938168161
Author:OpenStax
Publisher:OpenStax
Thermodynamics: Crash Course Physics #23; Author: Crash Course;https://www.youtube.com/watch?v=4i1MUWJoI0U;License: Standard YouTube License, CC-BY