Concept explainers
Two metal rods are being heated in an oven with uniform ambient temperature of 1000°C and convection heat transfer coefficient of 25 W/m2 K. Rod A is made of aluinimini
Want to see the full answer?
Check out a sample textbook solutionChapter 4 Solutions
HEAT+MASS TRANSFER ACCESS CODE
- 3.16 A large, 2.54-cm.-thick copper plate is placed between two air streams. The heat transfer coefficient on one side is and on the other side is . If the temperature of both streams is suddenly changed from 38°C to 93°C, determine how long it takes for the copper plate to reach a temperature of 82°C.arrow_forwardHeat is transferred at a rate of 0.1 kW through glass wool insulation (density=100kg/m3) with a 5-cm thickness and 2-m2 area. If the hot surface is at 70C, determine the temperature of the cooler surface.arrow_forwardA 4-mm-diameter and 10-cm-long aluminum fin (k = 237 W/m·K) is attached to a surface. If the heat transfer coefficient is 12 W/m2·K, determine the percent error in the rate of heat transfer from the fin when the infinitely long fin assumption is used instead of the adiabatic fin tip assumption.arrow_forward
- A 30-m-long section of an 8-cm-diameter horizontal hot water pipe passes through a large room whose temperature is 20°C. If the outer surface temperature of the pipe is 70°C, determine the rate of heat loss from the pipe by natural convection. k = 0.02699 W/m °C Pr = 0.7241, ν = 1.749 ×10-5. Select one: a. 3485.4 W b. 3827.7 W c. 2211.8 W d. 2683.6 Warrow_forward2. A 15-cm X 20-cm hot surface at 85°C is to be cooled by attaching 4 cm-long aluminum (k = 237 W/m-°C) fins of 2-mm X 2-mm square cross section. The temperature of surrounding medium is 25°C and the heat transfer coefficient on the surfaces can be taken to be 20 W/m2-°C. If it is desired to triple the rate of heat transfer from the bare hot surface, determine the number of fins that needs to be attached.arrow_forwardA 6 cm diameter sphere is initially at a temperature of 100C. Later, this sphere was thrown into water at 800C. Calculate how long it will take for the center temperature of the sphere to reach 500C by taking the convection heat transfer coefficient as 80W / m2K. Thermal properties of sphere material: k=0,627 W/moC a=0,151x10-6 m2/sarrow_forward
- A hot surface at 100°C is to be cooled by attaching3-cm-long, 0.25-cm-diameter aluminum pin fins (k = 237 W/m·K) to it, with a center-to-center distance of 0.6 cm. Thetemperature of the surrounding medium is 30°C, and the heattransfer coefficient on the surfaces is 35 W/m2·K. Determine therate of heat transfer from the surface for a 1-m * 1-m sectionof the plate. Also determine the overall effectiveness of the fins.arrow_forwardIn a meat processing plant, 4 cm-diameter spherical meat balls (k=0.45 W/m-K and α=0.91×10-7 m²/s) that are initially at 25 °C are to be cooled by passing them through a refrigeration room at -10 °C. The heat transfer coefficient in the cold room is 22.5 W/m²-K. If surface of the meat balls is to be cooled to 3 °C, determine how long the meat balls should be kept in the refrigeration room. What will be the center temperature of the meat balls at the end of the process?arrow_forwardCircular fins of uniform cross section, with diameter of 10 mm and length of 50 mm, are attached to a wall with surface temperature of 350°C. The fins are made of material with thermal conductivity of 240 W/m·K, and they are exposed to an ambient air condition of 25°C and the convection heat transfer coefficient is 250 W/m2·K. Determine the heat transfer rate and plot the temperature variation of a single fin for the following boundary conditions: (a) Infinitely long fin (b) Adiabatic fin tip (c) Fin with tip temperature of 250°C (d) Convection from the fin tiparrow_forward
- Consider a 2-m-high electric hot-water heater thathas a diameter of 40 cm and maintains the hot water at 55°C.The tank is located in a small room whose average temperatureis 27°C, and the heat transfer coefficients on the innerand outer surfaces of the heater are 50 and 12 W/m2·K,respectively. The tank is placed in another 46-cm-diametersheet metal tank of negligible thickness, and the spacebetween the two tanks is filled with foam insulation (k =0.03 W/m·K). The thermal resistances of the water tank andthe outer thin sheet metal shell are very small and can be neglected. The price of electricity is $0.08/kWh, and the home owner pays $280 a year for water heating. Determine the fraction of the hot-water energy cost of this household that is due to the heat loss from the tank. Hot-water tank insulation kits consisting of 3-cm-thick fiberglass insulation (k = 0.035 W/m·K) large enough to wrap the entire tank are available in the market for about $30. If such an insulation is installed on…arrow_forward1. (a) Consider a room with a 1.8-m-high and 2.0-m-wide double-pane window consisting of two 4-mm-thick layers of glass separated by a 10-mm-wide stagnant air space. The convection heat transfer coefficients on the inner and outer surfaces of the window are 12 W/m2 K and 25 W/m2 K, respectively, while the average thermal conductivity of glass is 0.78 W/m K; and the air, 0.026 W/m K. If the room is maintained at 22 oC, the outside temperature is -4 oC and heat transfer due to radiation can be neglected, determine: (i) Draw the sketch and thermal resistance network; (ii) the total thermal resistance; (iii) the steady rate of heat transfer through this double-pane window; (iv) the temperature of the inner surface of the window.…arrow_forwardPulverized coal particles are used in oxy-fuel combustion power plants for electricity generation. Consider a situation where coal particles are suspended in hot air flowing through a heated tube, where the convection heat transfer coefficient is 100 W/m2·K. If the average surface area and volume of the coal particles are 3.1 mm2 and 0.5 mm3, respectively, determine how much time it would take to heat the coal particles to two-thirds of the initial temperature difference.arrow_forward
- Principles of Heat Transfer (Activate Learning wi...Mechanical EngineeringISBN:9781305387102Author:Kreith, Frank; Manglik, Raj M.Publisher:Cengage Learning