Concept explainers
Investigate the operation of various turbines and explain the operation of steam turbines, hydraulic turbines, gas turbines, and wind turbines.
Explanation of Solution
Turbine:
A turbine is also known as rotary engine that transforms the rotational energy from a fluid or air into a usable energy or work.
The turbine contains a generator, a shaft, and blades. The blade act as a barrier for fluid or air, when the blade moves the energy from the water or air is transferred to the rotor. When the rotor starts to rotate the shaft also rotates and transforms the
Impulse turbine:
Impulse turbine changes the flow path of high velocity fluid. The turbine spins and leaves the kinetic energy from the fluid flow as a result of the impulse. The pressure of the blades does not alter. The total pressure drop takes place in the stationary blades for the steam or gas turbine. The stationary blades is the part which takes place the total pressure drop in the steam or gas turbine.
The fluid pressure head is reformed to velocity head by accelerating the fluid with a nozzle. No pressure casement is required for impulse turbine. The Pelton wheels use the impulse turbine concept exclusively.
Reaction turbine:
The reaction turbine functions are based on the Newton’s third law of motion. The torque developed due to the turbine response to the fluid pressure. The pressure casement is essential for the turbine.
The turbine nozzles are united to the rotor. The Francis turbine and steam turbines are use the concept of reaction turbine. When the fluid leaving through the nozzles, it produces a reaction force on the pipes due to acceleration of fluid. It causes the rotor to change in the direction against to the direction of fluid. Steam turbines and Francis turbine are used by the concept of reaction turbine.
Operation of steam turbine:
The higher amount of mechanical power is produced by the steam turbine applying the less amount of steam. The wheels and blades are attached to the steam turbine rotor. The turbine blade extracts the energy from the steam. It is meant for the electricity production in the thermal power plants. The primary type of steam turbine is the condensing steam turbine.
Operation of hydraulic turbine:
The hydraulic turbine transforms the kinetic energy of the falling water into mechanical energy of rotation. It is used in hydraulic power plants. The modern hydraulic turbines are a form of fluid dynamic machinery of the jet and vane type operating on the principle of impulse or reaction turbine.
Operation of gas turbine:
In gas turbine the air is used as a working fluid. It contains three main components they are downstream turbine on the shaft, upstream rotating gas compressor, and a combustion chamber in the midst of the compressor and the shaft.
The compressor pulls the air into the engine, and push in to the ‘combustion chamber’. It creates the larger amount of pressure and temperature and expands through the turbine section, then the electricity has produced owing to the spinning of generator.
Operation of wind turbine:
Wind turbine works on the principle by which the wind is used to generate mechanical power or electricity. The propellers or blades get rotation while the wind energy strikes on the blades around the rotor. The shaft is connected with rotor and it induce the generator to produce electricity.
Conclusion:
Thus, the operation of steam turbines, hydraulic turbines, gas turbines, and wind turbines is explained.
Want to see more full solutions like this?
Chapter 4 Solutions
Mindtap Engineering 2 Terms (12 Months) Printed Access Card For Moaveni's Engineering Fundamentals: An Introduction To Engineering, 5th (activate Learning With These New Titles From Engineering!)
- Write a note on Turgo Turbine also write functions of its main components?arrow_forwardAbsolute pressure = Gauge pressure + Atmospheric pressureA pressure gauge in a refrigerator system is reading 119.6 pounds per sq ingauge pressure when the atmospheric pressure is 14.7 pounds per sq in (psi).What is the absolute pressure of the refrigerant in that system?arrow_forwardcalculate the volume and capacity of a cylindrical tank 4 feet diameter and 6 feet height ?arrow_forward
- A cylindrical tank 10 ft. high and 4 ft in diameter placed so that its axis is horizontal. It is filled with water to a depth of 3 ½ ft. How many gallons of water in the tank? (Hint: 1 cu.ft. = 7.48 gal.)arrow_forwardConsider a cylindrical tank (diameter = 8 m and depth = 5 m) that contains water at 15ºC and is filled up to the brim. If the water is heated to 60ºC, calculate the amount of water that will spill over the edge of the tank. Assume the tank does not expand with the change in temperature. You may use the table given in the Appendix section for reference.arrow_forwardPlease answer asap Both a gage and a manometer are attached to a tank to measure pressure. Given the reading on the pressure gage, determine the differential height h of the mercury column. (Round off ONLY the final result to three decimal places. Indicate the unit of your final answer)arrow_forward
- Please help me answer this question and please show the solution for each indicated problem. A pitcher throws a fast ball that is moving at a speed of 80 mph. The batter hits the ball in the direction shown. The ball leaves the bat at a speed of 190 mph. If the bat and the ball are in contact for 0.030 seconds, determine the average impulse force exerted on the ball by the batter during the impact. The ball weighs 0.40 lbs.arrow_forwardWater flows from a hose bib at a rate of 15.8 gallons per minute. What is the rate in liters per second? (1 gallon = 3.785412 liters)arrow_forwardAn anemometer measures the velocity of the air from a grill. The anemometerreading is 18 ft/m. What is the reading in meters per minute?arrow_forward
- A venturi meter with throat diameter of 37.5 mm and coefficient of discharge of 0.957 is connected to a 75 mm pipe to measure the discharge of oil with specific gravity of 0.853. A differential gage filled with liquid with specific gravity of 1.35 is connected. If there is a 415 mm difference in the height of the fluid in the meter, what is the flowrate of oil? (PLEASE USE BERNOULLI'S ENERGY EQUATION) INCLUDE COMPLETE SOLUTION PLEASEarrow_forwardWater flows from the ground floor to the third floor in a 4-storey building through a pipe 50 mm in diameter at a rate of 2 L/s and according to the diagram below. The water flows out from the system through a tap with an opening diameter of 15 mm. Q. Calculate the energy loss due to friction as the water flows through the pipearrow_forwardCalculate the total weight of a W18×35 that is 20 feet long.arrow_forward
- Engineering Fundamentals: An Introduction to Engi...Civil EngineeringISBN:9781305084766Author:Saeed MoaveniPublisher:Cengage Learning