Concept explainers
a.
Draw the diagram of series motor.
a.
Explanation of Solution
DC motor:
A DC motor is an electrical rotary machine that is used to convert electrical power into
Series motor:
In the series motor, the field winding and armature winding are connected in series. Since the field and armature winding are in series, it should be large enough to carry the current of the armature circuit. The diagram of series motor is shown in Figure 1. The series field winding is represented as
Conclusion:
Thus, the diagram of series motor is drawn.
b.
Draw the diagram of shunt motor.
b.
Explanation of Solution
Shunt motor:
In the shunt motor, the field and armature winding are in parallel connection. The rheostat is connected in series with field winding to vary the resistance of field circuit. The diagram of shunt motor is shown in Figure 2. The shunt connected field winding is represented as
Conclusion:
Thus, the diagram of shunt motor is drawn.
c.
Draw the diagram of compound motor.
c.
Explanation of Solution
Compound motor:
The compound motor has both a series and shunt field winding. The diagram of compound motor is shown in Figure 3.
Conclusion:
Thus, the diagram of compound motor is drawn.
Want to see more full solutions like this?
- A. The DC motor in Figure 3 on Worksheet 8 is aa) cumulatively connected short-shunt compound DC motor b) cumulatively connected long-shunt compound DC motor c) differentially connected short-shunt compound DC motor d) shunt DC motorB. Is the DC motor in Figure 1 on Worksheet 8 turning in the same direction as that in Figure 3?a) yes b) noarrow_forward4. What for brushes are employed in DC generator? 5. What is the function of armature in a DC generator? 6. What is the function of commutator in a DC machine in generator action. 7 Whieh diffe u0ad inarrow_forward1. Describe the constructional features and characteristics, of a induction motor that would be used in Lathe machine. Identify another application for this motor? 2. Describe the Torque-Slip characteristics of a three phase induction motor.arrow_forward
- 1. Calculate the flux per pole required on full load for a 50KW, 400V, 8 pole, 600 rpm dc shunt generator with 256 conductors arranged in a lap connected winding. The armature winding resistances is 0.1 ohm, the shunt field resistance is 200 ohm and there is a brush contact voltage drop of 1V at each brush on full load.arrow_forwardA DC generator has terminal voltage of 250 V and an induced voltage of 262 V when the generator is loaded. The brush drop is 1 volt per brush and the armature resistance is 0.03 ohm and the shunt field circuit resistance is 35 ohms. Neglected armature reaction and determine the following: (1) The load current. (2) The power of the load in kW. (3) The % voltage regulation.arrow_forward5) Flux control, voltage control, and armature control are three methods for ...... of dc motor.arrow_forward
- A DC motor that has interpoles will have the interpole windings in A. parallel with the field windings.B. series with the field windings.C. parallel with the armature. D. series with the armature.arrow_forwardA 900 rpm, 4 pole wave wound shunt motor takes 300 A. The flux per pole is 0.02 Wb and the armature has 1500 conductors. The shunt field takes 4 A of current. Solve for armature torque (Nm).arrow_forwardA 900 rpm, 4 pole lap wound shunt motor takes 300 A. The flux per pole is 0.02 Wb and the armature has 1500 conductors. The shunt field takes 4 A of current. Solve for power developed in the armature (W).arrow_forward
- 2. A 4 pole dc shunt motor has a flux per pole of 0.04 Wb and the armature is lap wound with 720 conductors. The shunt field resistance is 240 ohms and the armature resistance is 0.2 ohm. Brush contact drop is 1V per brush .Determine the speed of the machine when running as a motor taking 60 A and as a generator supplying 120A.The terminal voltage is 480V in each case.arrow_forwardDoes a DC motor have to be turning in order for it to develop torque? a) yes b) no Most DC motor consist of many turns per armature loop as well as many evenly distributed loops per al mature. a) true b) false Brushes a DC motor. a) are part of the electrical circuit in b) provide a sliding electrical contact to the commutator of c) are made of a material which is softer than the commutator segments of d) all of the abovearrow_forward6- In a stepper motor, how is the speed of rotation determined? a) By the current supplied to the motor. b) By the magnitude of the voltage applied. c) By the load applied to the motor. d) By the frequency of the waveforms used. 7- A transformer core is laminated to a) reduce hysteresis loss b) reduce eddy current losses c) reduce copper losses d) reduce all above losses 8- An induction motor with 580 r.p.m. speed at 60 Hz will have a) 8 poles b) 6 poles c) 4 poles d) 2 poles 9- If any two phases for an induction motor are interchanged a) the motor will run in reverse direction b) the motor will run at reduced speed c) the motor will not run d) the motor will burn 10- No-Load speed of which of the following motor will be highest? a) Shunt motor b) Series motor c) Short-Shunt compound motor d) Long-Shunt compound motorarrow_forward
- Delmar's Standard Textbook Of ElectricityElectrical EngineeringISBN:9781337900348Author:Stephen L. HermanPublisher:Cengage Learning