Concept explainers
Plot the shear diagram, bending moment diagram, axial force diagram, and the qualitative deflected shape of the frame.
Explanation of Solution
Write the condition for static instability, determinacy and indeterminacy of plane frames as follows:
Here, number of members is m, number of external reactions is r, the number of joints is j, and the number of elastic hinges is
Find the degree of static indeterminacy (i) using the equation;
Refer to the Figure in the question;
The number of members (m) is 3.
The number of external reactions (r) is 3.
The number of joints (j) is 4.
The number of elastic hinges
Substitute the values in Equation (2);
Show the free-body diagram of the entire frame as in Figure 1.
Refer Figure 1,
Find the vertical reaction at point D by taking moment about point A.
Find the vertical reaction at point A by resolving the vertical component of forces.
Find the horizontal reaction at point D by resolving the horizontal component of forces.
Show the free-body diagram of the members and joints of the entire frame as in Figure 2.
Consider point A:
Resolve the vertical component of forces.
Consider the member AB:
Resolve the vertical component of forces.
Resolve the horizontal component of forces.
Take moment about the point B.
Consider the point B:
Resolve the vertical component of forces.
Resolve the horizontal component of forces.
Take moment about the point B.
Consider the member BC:
Resolve the vertical component of forces.
Resolve the horizontal component of forces.
Take moment about the point C.
Consider the point C:
Resolve the vertical component of forces.
Resolve the horizontal component of forces.
Take moment about the point C.
Consider the point D:
Resolve the vertical component of forces.
Resolve the horizontal component of forces.
Plot the moment end forces of the frame as in Figure 3.
Refer to the moment end force diagram plot the shear diagram, bending moment diagram, and the axial force diagrams.
Refer to the shear force diagram, the maximum bending moment occurs at point F where the shear force changes sign.
Use similar triangle concept for the region BC:
Plot the shear force diagram as in Figure 4.
Find the bending moment at point F.
Plot the bending moment diagram as in Figure 5.
Plot the axial force diagram as in Figure 6.
Plot the qualitative deflected shape as in Figure 7.
Want to see more full solutions like this?
Chapter 5 Solutions
Structural Analysis, Si Edition
- Draw the shear and bending moment diagrams and the qualitative deflected shape for the beam shown. 100 kN 60 kN B C -5 m- -10 m FIG. P5.29arrow_forwardDetermine the equations for shear and bending moment for the beam shown. Use the resulting equations to draw the shear and bending moment diagrams. B L- FIG. P5.15arrow_forwardUse the unit load method to find the magnitude and direction of the deflection of the joint Cin the truss shown in Fig., P.15.11. All members have a cross-sectional area of 500 mm² and a Young's modulus of 200 000 N/mm². Ans. 23.4 mm, 9.8° to left of vertical.arrow_forward
- 6.14 through 6.17 use the moment area method to determine the slopes and deflections at points B and C of the beam shown.arrow_forward1. Draw the shear and moment diagram of the beam below using equation method. 6.9 The intensity of the distributed load on the simply supported beam varies lin- early from zero to wo. (a) Derive the equation of the elastic curve. (b) Find the loca- tion of the maximum deflection. Express answer in terms of El. A 6m FIG.P6.9 Wo=14kN/m B Xarrow_forwardM В Determine the equations for slope and deflection of the beam shown by the direct integration method. EI = constant. FIG. P6.1arrow_forward
- Determine the horizontal and vertical components of the deflection at joint B of the truss shown in Fig. 7.7(a) by the virtual work methodarrow_forwardThe truss shown in Fig.3 is supported by a roller at C and a hinge at D. Use Castigliano's theorem to calculate the horizontal deflection for point B. E-200 B. kN/mm² and A-800 mm² for all members. s) 15 kN 2 m 20 KN B Th 2 m Fig.3arrow_forwardlateral torsional bucking in beam occur due toarrow_forward