AUTOMOTIVE TECHNOLOGY (W/MINDTAP)
7th Edition
ISBN: 9780357096772
Author: ERJAVEC
Publisher: CENGAGE L
expand_more
expand_more
format_list_bulleted
Textbook Question
Chapter 52, Problem 10ASRQ
Loaded calipers are being discussed: Technician A says that loaded calipers are replacement calipers that come with pads and hardware already installed. Technician B says that loaded calipers should always be installed in axle sets. Who is correct?
- Technician A only
Expert Solution & Answer
Trending nowThis is a popular solution!
Students have asked these similar questions
Technician A says that fixed calipers use a piston oneach side of the rotor to apply the brakes. Technician Bsays that sliding calipers typically use only one pistonor pistons on one side of the rotor. Who is correct?a. Technician A onlyb. Technician B onlyc. Both A and Bd. Neither A nor B
When replacing brake pads on a vehicle: Technician A works on one wheel before beginning work on an-other. Technician B uses a minimum of 52 psi of air pressure to force the piston from the caliper housing. Who is correct?
When replacing brake pads on a vehicle: Tech-nician A works on one wheel before beginning work on another. Technician B uses a minimum of 52 psi of air pressure to force the piston from the caliper housing. Who is correct? a. Technician A only b. Technician B only c. Both A and B d. Neither A nor B
Chapter 52 Solutions
AUTOMOTIVE TECHNOLOGY (W/MINDTAP)
Ch. 52 - Name the three major assemblies that make up a...Ch. 52 - Name the three types of calipers used on disc...Ch. 52 - Describe the differences between floating and...Ch. 52 - What is the difference between floating and...Ch. 52 - What is rotor parallelism and how is it checked?Ch. 52 - Why is brake fluid removed from the master...Ch. 52 - Describe the procedure for using compressed air to...Ch. 52 - List three conditions that dictate that a rotor...Ch. 52 - Give two main advantages of an on-vehicle lathe...Ch. 52 - What should be done to remove rust, corrosion, pit...
Ch. 52 - What type of brake uses the inside of each rear...Ch. 52 - True or False? Disc brakes are not as likely to...Ch. 52 - True or False? All calipers have at least one...Ch. 52 - Which term refers to variations in thickness of...Ch. 52 - Which of the following is not likely to cause a...Ch. 52 - Technician A says that a hard brake pedal on a...Ch. 52 - When replacing brake pads on a vehicle: Technician...Ch. 52 - When examining disc brakes: Technician A visually...Ch. 52 - When reassembling an overhauled brake caliper:...Ch. 52 - While discussing how to remove the piston from a...Ch. 52 - The functions of a splash shield are being...Ch. 52 - Technician A says that the piston seal retracts...Ch. 52 - Technician A says that fixed calipers use a piston...Ch. 52 - While installing new brake pads: Technician A...Ch. 52 - Loaded calipers are being discussed: Technician A...
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.Similar questions
- Technician A says that fixed calipers use a piston on each side of the rotor to apply the brakes. Technician B says that sliding calipers typically use only one piston or pistons on one side of the rotor. Who is correct? Technician A only Technician B only Both A and B Neither A nor Barrow_forwardTechnician A says that on most vehicles, the wheel/tire assembly is considered sprung weight . Technician B says that low unsprung weight makes the vehicle handle better on irreg ular surfaces. Who is correct?arrow_forwardWhile installing new brake pads: Technician A coats the caliper bushings with silicone grease before installing the mounting bolts and sleeves of floating calipers. Technician B lubricates the caliper ways on the caliper support and the mating parts of the sliding caliper housings with the recommended lubricant. Who is correct?arrow_forward
- Carry out a FMEA on at least 3 different parts of the brakes system of an off-road bicyclearrow_forwardTechnician A says that flare nut or line wrenches should be sued to loosen or tighten brake line or tubing fittings Technician B says that open-end wrenches will surround the fitting's nut and provide a positive grip on the fitting. Who is correct? Group of answer choices Technician A only Technician B only Both Technicians A and B Neither A nor Barrow_forwardA brake pad is found to be wearing more on one side than the other. Technician A says this is common in real world situations. Technician B says this is always a clear sign that there’s a problem. Who is correct? Technician A Technician B Both Technician A and B Neither Technician A or Barrow_forward
- Technician a says radial ply tires are more rigid in the sidewall area than bias ply tires. Technician b says the belts in a radial tire restrict tread motion during contact with the road thus improving tread life in traction. who is correctarrow_forwardWhile discussing how to remove the piston from a brake caliper: Technician A says that the dust boot should be removed, then a large dull screwdriver should be inserted into the piston groove to pry the piston out. Technician B says that air pressure should be injected into the bleeder screw’s bore to force the piston out of the caliper. Who is correct? a. Technician A only b. Technician B only c. Both A and B d. Neither A nor Barrow_forwardWhile installing new brake pads: Technician A coats the inside diameter of the bushings with silicone grease before installing the mounting bolts and sleeves of floating calipers. Technician B lubricates the caliper ways on the caliper support and the mating parts of the sliding caliper housings with the recommended lubricant. Who is correct?arrow_forward
- Technician A says the front wheel bearings on a typical FWD car are sealed and non-adjustable. Technician B says the front wheel bearings on a typical FWD car are greaseable and adjustable. Who is correct?arrow_forwardAll calipers have at least one piston that pushes the brake pad against the rotor?arrow_forwardAfter replacing a vacuum booster, the brakes lock up on a road test. Technician A says there is air trapped inside the brake lines. Technician B says the power booster pushrod needs adjustment. Who is correct? a. A only b. B only c. both A and B d. neither A nor Barrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
- Automotive Technology: A Systems Approach (MindTa...Mechanical EngineeringISBN:9781133612315Author:Jack Erjavec, Rob ThompsonPublisher:Cengage Learning
Automotive Technology: A Systems Approach (MindTa...
Mechanical Engineering
ISBN:9781133612315
Author:Jack Erjavec, Rob Thompson
Publisher:Cengage Learning
Mod-01 Lec-16 Basics of Instrumentation; Author: nptelhrd;https://www.youtube.com/watch?v=qbKnW42ZM5c;License: Standard YouTube License, CC-BY