An oil refinery finds that it is necessary to treat the waste liquids from a new process before discharging them into a stream. The treatment will cost $30,000 the first year, but process improvements will allow the costs to decline by $3,000 each year. As an alternative, an outside company will process the wastes for the fixed price of $15,000/year throughout the 10-year period, payable at the beginning of each year. Either way, there is no need to treat the wastes after 10 years. Use the annual worth method to determine how the wastes should be processed. The company’s MARR is 10%. (6.2)
Calculate the annual worth.
Explanation of Solution
Time period is denoted by n and the interest is denoted by i. Annual worth (AWA) of A can be calculated as follows.
Annual worth is -$16,500.
Annual worth (AWB) of B can be calculated as follows.
Annual worth is -$16,500. Since the present worth of the cost is lower for option B, select the option B.
Want to see more full solutions like this?
Chapter 6 Solutions
Engineering Economy Plus Mylab Engineering With Pe Format: Cloth Bound With Access Card
Additional Business Textbook Solutions
Engineering Economy (16th Edition) - Standalone book
Microeconomics (9th Edition) (Pearson Series in Economics)
Contemporary Engineering Economics (6th Edition)
Financial Accounting (11th Edition)
Gitman: Principl Manageri Finance_15 (15th Edition) (What's New in Finance)
Managerial Accounting (4th Edition)
- A cement kiln with production capacity of 140 tons per day (24 hours) of clinker has at its burning zone about 60 tons of magnetite chrome bricks being replaced periodically, depending on some operational factors and the life of the bricks. If locally produced bricks costs P30,000 per ton and have a life of 5 months, while certain imported bricks costing P35,000 per ton and have a life of 7 months, determine the more economical bricks and by how much. a.Local bricks are more economical by P50,550/month b.Imported bricks are more economical by Php60,000/month c.Imported bricks are more economical by P50,550/month d.Local bricks are more economical by P60,000/montharrow_forwardThe cost of an item is P200,000. Cost is P20,000 per year. What would be the capitalised cost of a permanent service using 10%?arrow_forwardIn a cold storage plant, it is desired to determine whether to use insulation two inches thick or three inches thick in insulating the walls of the cold storage ware house. Heat absorb through the walls without insulation would cost P96.00 per year per square meter. A two-inch insulation will cost P30.40 per square meter and will cut out 89% of the loss. A three-inch insulation will cut out 92% of the loss and will cost P65.00 per square meter. Using a life 15 years for the insulation with no salvage value and a minimum attractive return of 8%, what thickness of insulation should be used?arrow_forward
- EP Electric has identified two new methods to treat its cooling water. Alternative I (for inflow) would treat the raw water with a conventional reverse osmosis system so that the cycles of concentration could be increased from 5 to 20. This will result in water cost savings of $360,000 per year and chemical cost savings of $56,000 per year. The initial cost of the equipment will be $2.3 million with an operating cost of $125,000 per year. Alternative B (for blowdown) will treat the cooling tower blowdown water using a highpressure seawater reverse osmosis system to recover most of the water that is sent to an evaporation pond. This option will result in water savings of $270,000 per year. The cost of the system will be $1.2 million with an operating cost of $105,000 per year. Assuming one of the two methods must be installed, determine which is preferred on the basis of the incremental ROR value using MARR of 5% per year, which is a typically low return expected of government projects.…arrow_forwardA window frame manufacturer is searching for ways to improve revenue from its triple-insulated sliding windows, sold primarily in the far northern areas of the United States. Alternative A is an in- crease in TV and radio marketing. A total of $300,000 spent now is expected to increase revenue by $60,000 per year. Alternative B requires the same investment for enhancements to the in-plant manufacturing process that wil improve the temperature retention properties of the seals around each glass pane. New revenues start slowly for this alternative at an estimated $10,000 the first year, with growth of $15,000 per year as the improved product gains reputation among builders. The MARR is 8% per year and the maximum projection period is 10 years for either alternative.arrow_forwardA bridge is to be constructed now as part of a new road. Engineers have determined that traffic density on the new road will justify a two-lane road and a bridge at the present time. Because of uncertainty regarding future use of the road, the time at which an extra two lanes will be required is currently being studied. The two-lane bridge will cost $220,000 and the four-lane bridge, if built initially, will cost $420,000. The future cost of widening a two-lane bridge to four lanes will be an extra $220,000 plus $26,000 for every year that widening is delayed. The MARR used by the highway department is 18% per year. The following estimates have been made of the times at which the four-lane bridge will be required:arrow_forward
- A piece of new equipment has been proposed by engineers to increase the productivity of a certain manual welding operation. The investment cost is 2,500,000, and the equipment will have a market value of 50,000 at the end of a study period of 15 years. Increased productivity attributable to the equipment will amount to 500,000 per year after extra operating costs have been subtracted from the revenue generated by the additional production. If the firm’s Minimum Attractive Rate of Return is 22% per year, is this proposal a sound one? Use the Present Worth Method and Annual Worth Method.arrow_forwardAdams Manufacturing spent $30,000 on a new sterilization conveyor belt, which resulted in a cost savings of $4202 per year. The length of time it should take to recover the investment at 8% per year is closest to: (a) Less than 6 years (b) 7 years (c) 9 years (d) 11 yearsarrow_forwardAn oil refinery finds that it is necessary to treat the waste liquids from a new process before discharging them into a stream. The treatment will cost $30,000 the first year, but process improvements will allow the costs to decline by $3,000 each year. As an alternative, an outside company will process the wastes for the fixed price of $15,000/year throughout the 10 year period, payable at the beginning of each year. Either way, there is no need to treat the wastes after 10 years. Use the annual worth method to determine how the wastes should be processed. The company's MARR is 6%.arrow_forward
- Please do not give solution in image formate thanku. Biomet Implants is planning new online patient diagnostics for surgeons while they operate. The new system will cost $300,000 to install in an operating room, $5000 annually for maintenance, and have an expected life of 10 years. The revenue per system is estimated to be $80,000 in year 1 and to increase by $10,000 per year through year 10. a) Determine NPV to see if the project is economically justified using PW analysis and an MARR of 10% per year. b) Insert a Triangle distribution with minimum at $8000, average 10,000 and maximum at 12000 as the input distribution for the revenue increase. Perform Monte Carlo Simulation and discuss the results.arrow_forwardThe initial cost of a packed-bed degassing reactor for removing trihalomethanes from potable water is $84,000. The annual operating cost for power, site maintenance, etc. is $13,000. If the salvage value of the pumps, blowers, and control systems is expected to be $9000 at the end of 10 years, the AW of the packed-bed reactor, at an interest rate of 8% per year, is closest to: (a) $−26,140 (b) $−25,518 (c) $−24,900 (d) $−13,140arrow_forwardTwo different liquid filter systems are being studied to clarify a liquid stream. A traditional filter will operate for one 8-hour shift before being replaced. A special pleated design can last one full week, operating 24 hours a day (3 shifts), 5 days per week. Labor cost to change a filter is estimated to be worth $10.00 for each filter change because a mechanic would work overtime to change the filter. The traditional filters cost $3.50; the special pleated filters cost $90.00. Which filter should be chosen?arrow_forward
- Principles of Economics (12th Edition)EconomicsISBN:9780134078779Author:Karl E. Case, Ray C. Fair, Sharon E. OsterPublisher:PEARSONEngineering Economy (17th Edition)EconomicsISBN:9780134870069Author:William G. Sullivan, Elin M. Wicks, C. Patrick KoellingPublisher:PEARSON
- Principles of Economics (MindTap Course List)EconomicsISBN:9781305585126Author:N. Gregory MankiwPublisher:Cengage LearningManagerial Economics: A Problem Solving ApproachEconomicsISBN:9781337106665Author:Luke M. Froeb, Brian T. McCann, Michael R. Ward, Mike ShorPublisher:Cengage LearningManagerial Economics & Business Strategy (Mcgraw-...EconomicsISBN:9781259290619Author:Michael Baye, Jeff PrincePublisher:McGraw-Hill Education