Thermodynamics: An Engineering Approach
Thermodynamics: An Engineering Approach
8th Edition
ISBN: 9780077624811
Author: CENGEL
Publisher: MCG
bartleby

Videos

Question
Book Icon
Chapter 7.13, Problem 206RP

a)

To determine

The average temperature of the room after 30 min.

a)

Expert Solution
Check Mark

Answer to Problem 206RP

The average temperature of the room after 30 min is 12.3°C.

Explanation of Solution

Write the expression for the energy balance equation for closed system without air in the room.

EinEout=ΔEsystem (I)

Here, energy transfer into the control volume is Ein, energy transfer exit from the control volume is Eout and change in internal energy of system is ΔEsystem.

Write the expression to calculate the final vapor quality.

x2=v2vfvgvf (II)

Here, final vapor quality is x2, final molar volume is v2, saturated liquid molar volume is vf and saturated vapor molar volume is vg.

Write the expression to calculate the final internal energy of the system.

u2=uf+x2ufg (III)

Here, final internal energy of the system is u2, saturated liquid internal energy is uf, final vapor quality is x2, and evaporation internal energy is ufg.

Write the expression to calculate the final entropy of the system.

s2=sf+x2sfg (IV)

Here, final entropy of the system is s2, saturated liquid entropy is sf, final vapor quality is x2, and evaporation entropy is sfg.

Write the expression to calculate the mass of the steam.

m=ν1v1 (V)

Here, mass of the steam is m, volume of the steam is ν1 and initial specific volume of steam is v1.

Write the expression to calculate the ideal gas equation, to find the mass of the air.

mair=P1ν1RT1 (VI)

Here, mass of the air is mair, initial pressure is P1, initial volume is ν1, gas constant is R and initial temperature is T1.

Write the expression to calculate the total work done by the fan.

Wfan,in=W˙fan,in(Δt) (VII)

Here, rate of work done by fan is W˙fan,in and time is Δt.

Conclusion:

Substitute 0 for Ein, Qout for Eout and ΔU for ΔEsystem in Equation (I).

0Qout=ΔUQout=m(u2u1)Qout=m(u1u2) (VIII)

Here, change in internal energy of system is ΔU, heat transfer out is Qout, mass of the steam is m, initial internal energy is u1 and final internal energy is u2.

From the Table A-6, “Superheated water table”, obtain the following properties of steam at temperature of 200 °C and pressure of 200kPa.

v1=1.0805m3/kgu1=2654.4kJ/kgs1=7.5081kJ/kgK

From the Table A-6, “Saturated water-Pressure table”, obtain the following properties of steam at pressure of 100kPa.

vf=0.001043m3/kgvg=1.6941m3/kg

Here, Saturated liquid specific volume is vf and saturated vapor specific volume is vγ.

Substitute 1.0805m3/kg for v2, 0.001043m3/kg for vf and 1.6941m3/kg for vg in Equation (II).

x2=1.0805m3/kg0.001043m3/kg1.6941m3/kg0.001043m3/kg=0.6376

From the Table A-6, “Saturated water-Pressure table”, obtain the following properties of steam at pressure of 100kPa.

uf=417.40kJ/kgufg=2088.2kJ/kg

Here, Saturated liquid internal energy is uf and Evaporation internal energy is ufg.

Substitute 417.40kJ/kg for uf, 0.6376 for x2 and 2088.2kJ/kg for ufg in Equation (III).

u2=417.40kJ/kg+(0.6376)(2088.2kJ/kg)=1748.7kJ/kg

From the Table A-6, “Saturated water-Pressure table”, obtain the following properties of steam at pressure of 100kPa.

sf=1.3028kJ/kgKsfg=6.0562kJ/kgK

Here, Saturated liquid entropy is sf and evaporation entropy is sfg.

Substitute 1.3028kJ/kgK for sf, 0.6376 for x2 and 6.0562kJ/kgK for sfg in Equation (IV).

s2=1.3028kJ/kgK+(0.6376)(6.0562kJ/kgK)=5.1642kJ/kgK

Substitute 0.015m3 for ν1 and 1.0805m3/kg for v1 in Equation (V).

m=0.015m31.0805m3/kg=0.01388kg

Substitute 0.01388 kg for m, 2654.4kJ/kg for u1 and 1748.7kJ/kg for u2 in Equation (VIII).

Qout=(0.01388kg)(2654.4kJ/kg1748.7kJ/kg)=12.6kJ

Substitute Qin+Wfan,in for Ein, Wb,out for Eout and ΔU for ΔEsystem in Equation (I).

Qin+Wfan,inWb,out=ΔUQin+Wfan,in=ΔU+Wb,outQin+Wfan,in=ΔHQin+Wfan,in=mcp(T2T1) (IX)

Here, heat transfer in is Qin, work done by the fan is Wfan,in, mass of the air is m, specific heat at constant pressure is cp, initial temperature is T1 and final temperature is T2.

From the Table A-1, “the molar mass, gas constant and critical point properties table”, select the gas constant of air as 0.2870kJ/kgK.

Substitute 100kPa for P1, (4m×4m×5m) for ν1, 0.2870kJ/kgK for R and 10 °C for T1 in Equation (VI).

mair=(100 kPa)(4m×4m×5m)(0.2870kJ/kgK)10°C=(100 kPa)(80m3)(0.2870kJ/kgK)(1kPam31kJ)(10+273)K=98.5kg

Substitute 0.120kJ/s for W˙fan,in and 30 min for Δt in Equation (VII).

Wfan,in=(0.120kJ/s)(30min)=(0.120kJ/s)(30min)(60sec1min)=216kJ

From the Table A-2, “the ideal–gas equation specific heats of various common gases table”, select the specific heat at constant pressure for air as 1.005kJ/kgK.

Substitute 12.6 kJ for Qin, 216 kJ for Wfan,in, 98.5 kg for m, 1.005kJ/kgK for cp and 10 °C for T1 in Equation (IX).

12.6kJ+216kJ=(98.5 kg)(1.005kJ/kgK)(T210 °C)T2=12.3°C

Thus, the average temperature of the room after 30 min is 12.3°C.

b)

To determine

The entropy change of the steam.

b)

Expert Solution
Check Mark

Answer to Problem 206RP

The entropy change of the steam is 0.0325kJ/K.

Explanation of Solution

Write the expression to calculate the change of entropy of the steam.

ΔSsteam=m(s2s1) (X)

Here, mass of the steam is m, final entropy is s2 and initial entropy is s1.

Conclusion:

Substitute 0.01388 kg for m, 5.1642kJ/kgK for s2 and 7.5081kJ/kgK for s1 in Equation (X).

ΔSsteam=(0.01388 kg)(5.1642kJ/kgK7.5081kJ/kgK)=0.0325kJ/K

Thus, the entropy change of the steam is 0.0325kJ/K.

c)

To determine

The entropy change of the air.

c)

Expert Solution
Check Mark

Answer to Problem 206RP

The entropy change of the air is 0.8013kJ/K.

Explanation of Solution

Write the expression to calculate the entropy change of air.

ΔSair=mcplnT2T1mRlnP2P1

Since, P2=P1.

ΔSair=mcplnT2T1 (XI)

Conclusion:

Substitute 98.5 kg for m, 1.005kJ/kgK for cp, 12.3 °C for T2 and 10 °C for T1 in Equation (XI).

ΔSair=(98.5 kg)(1.005kJ/kgK)ln12.3 °C10 °C=(98.5 kg)(1.005kJ/kgK)ln(12.3+273)K(10+273)K=0.8013kJ/K

Thus, the entropy change of the air is 0.8013kJ/K.

d)

To determine

The entropy generation in the turbine.

d)

Expert Solution
Check Mark

Answer to Problem 206RP

The entropy generation in the turbine is 4.01kW/K.

Explanation of Solution

Write the expression for the entropy balance equation of the system.

SinSout+Sgen=ΔSsystem (XII)

Here, rate of net entropy in is Sin, rate of net entropy out is Sout, rate of entropy generation is Sgen and change of entropy of the system is ΔSsystem

Conclusion:

Substitute 0 for Sin, 0 for Sout and ΔSair+ΔSsteam for ΔSsystem in Equation (XII).

00+Sgen=ΔSair+ΔSsteamSgen=ΔSair+ΔSsteam (XIII)

Here, entropy change of air is ΔSair and entropy change of steam is ΔSstean.

Substitute 0.8013kJ/K for ΔSair and 0.0325kJ/K for ΔSsteam in Equation (XIII).

Sgen=0.8013kJ/K+0.0325kJ/K=0.7688kJ/K

Thus, the total entropy generated during the process is 0.7688kJ/K.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
Ten lbm of R-134a is expanded without any heat transfer in a closed system from 120 psia and 100°F to 20 psia. If the isentropic expansion efficiency is 95 percent, what is the final volume of this steam?
Steam enters an adiabatic turbine at 5 MPa, 650C, and 80 m/s and leaves at 50 kPa, 1508C, and 140 m/s. If the power output of the turbine is 8 MW, determine (a) the mass flow rate of the steam flowing through the turbine and (b) the isentropic efficiency of the turbine.
Refrigerant-134a at 140 kPa and 210C is compressed by an adiabatic 1.3-kW compressor to an exit state of 700 kPa and 60C. Neglecting the changes in kinetic and potential energies, determine (a) the isentropic efficiency of the compressor, (b) the volume flow rate of the refrigerant at the compressor inlet, in L/min, and (c) the maximum volume flow rate at the inlet conditions that this adiabatic 1.3-kW compressor can handle without violating the second law.

Chapter 7 Solutions

Thermodynamics: An Engineering Approach

Ch. 7.13 - A pistoncylinder device contains helium gas....Ch. 7.13 - A pistoncylinder device contains nitrogen gas....Ch. 7.13 - A pistoncylinder device contains superheated...Ch. 7.13 - The entropy of steam will (increase, decrease,...Ch. 7.13 - During a heat transfer process, the entropy of a...Ch. 7.13 - Steam is accelerated as it flows through an actual...Ch. 7.13 - Heat is transferred at a rate of 2 kW from a hot...Ch. 7.13 - A completely reversible air conditioner provides...Ch. 7.13 - Heat in the amount of 100 kJ is transferred...Ch. 7.13 - In Prob. 719, assume that the heat is transferred...Ch. 7.13 - During the isothermal heat addition process of a...Ch. 7.13 - Prob. 22PCh. 7.13 - During the isothermal heat rejection process of a...Ch. 7.13 - Air is compressed by a 40-kW compressor from P1 to...Ch. 7.13 - Refrigerant-134a enters the coils of the...Ch. 7.13 - A rigid tank contains an ideal gas at 40C that is...Ch. 7.13 - A rigid vessel is filled with a fluid from a...Ch. 7.13 - A rigid vessel filled with a fluid is allowed to...Ch. 7.13 - Prob. 29PCh. 7.13 - One lbm of R-134a is expanded isentropically in a...Ch. 7.13 - Two lbm of water at 300 psia fill a weighted...Ch. 7.13 - A well-insulated rigid tank contains 3 kg of a...Ch. 7.13 - Using the relation ds = (Q/T)int rev for the...Ch. 7.13 - The radiator of a steam heating system has a...Ch. 7.13 - A rigid tank is divided into two equal parts by a...Ch. 7.13 - Prob. 36PCh. 7.13 - An insulated pistoncylinder device contains 5 L of...Ch. 7.13 - Onekg of R-134a initially at 600 kPa and 25C...Ch. 7.13 - Refrigerant-134a is expanded isentropically from...Ch. 7.13 - Refrigerant-134a at 320 kPa and 40C undergoes an...Ch. 7.13 - A rigid tank contains 5 kg of saturated vapor...Ch. 7.13 - A 0.5-m3 rigid tank contains refrigerant-134a...Ch. 7.13 - Steam enters a steady-flow adiabatic nozzle with a...Ch. 7.13 - Steam enters an adiabatic diffuser at 150 kPa and...Ch. 7.13 - R-134a vapor enters into a turbine at 250 psia and...Ch. 7.13 - Refrigerant-134a enters an adiabatic compressor as...Ch. 7.13 - The compressor in a refrigerator compresses...Ch. 7.13 - An isentropic steam turbine processes 2 kg/s of...Ch. 7.13 - Prob. 52PCh. 7.13 - Twokg of saturated water vapor at 600 kPa are...Ch. 7.13 - A pistoncylinder device contains 5 kg of steam at...Ch. 7.13 - Prob. 55PCh. 7.13 - In Prob. 755, the water is stirred at the same...Ch. 7.13 - Prob. 57PCh. 7.13 - Prob. 58PCh. 7.13 - Determine the total heat transfer for the...Ch. 7.13 - Calculate the heat transfer, in kJ/kg. for the...Ch. 7.13 - Prob. 61PCh. 7.13 - An adiabatic pump is to be used to compress...Ch. 7.13 - Prob. 63PCh. 7.13 - Prob. 64PCh. 7.13 - A 30-kg aluminum block initially at 140C is...Ch. 7.13 - A 50-kg copper block initially at 140C is dropped...Ch. 7.13 - A 30-kg iron block and a 40-kg copper block, both...Ch. 7.13 - Prob. 69PCh. 7.13 - Prob. 70PCh. 7.13 - Can the entropy of an ideal gas change during an...Ch. 7.13 - An ideal gas undergoes a process between two...Ch. 7.13 - Prob. 73PCh. 7.13 - Air is expanded from 200 psia and 500F to 100 psia...Ch. 7.13 - Prob. 75PCh. 7.13 - Air is expanded isentropically from 100 psia and...Ch. 7.13 - Which of the two gaseshelium or nitrogenhas the...Ch. 7.13 - Which of the two gasesneon or airhas the lower...Ch. 7.13 - A 1.5-m3 insulated rigid tank contains 2.7 kg of...Ch. 7.13 - An insulated pistoncylinder device initially...Ch. 7.13 - A pistoncylinder device contains 0.75 kg of...Ch. 7.13 - A mass of 25 lbm of helium undergoes a process...Ch. 7.13 - One kg of air at 200 kPa and 127C is contained in...Ch. 7.13 - An insulated rigid tank is divided into two equal...Ch. 7.13 - Air at 27C and 100 kPa is contained in a...Ch. 7.13 - Air at 3.5 MPa and 500C is expanded in an...Ch. 7.13 - Air is compressed in a pistoncylinder device from...Ch. 7.13 - Helium gas is compressed from 90 kPa and 30C to...Ch. 7.13 - Nitrogen at 120 kPa and 30C is compressed to 600...Ch. 7.13 - Five kg of air at 427C and 600 kPa are contained...Ch. 7.13 - Prob. 92PCh. 7.13 - Prob. 93PCh. 7.13 - Prob. 94PCh. 7.13 - The well-insulated container shown in Fig. P 795E...Ch. 7.13 - An insulated rigid tank contains 4 kg of argon gas...Ch. 7.13 - Prob. 97PCh. 7.13 - Prob. 98PCh. 7.13 - Prob. 99PCh. 7.13 - It is well known that the power consumed by a...Ch. 7.13 - Calculate the work produced, in kJ/kg, for the...Ch. 7.13 - Prob. 102PCh. 7.13 - Prob. 103PCh. 7.13 - Saturated water vapor at 150C is compressed in a...Ch. 7.13 - Liquid water at 120 kPa enters a 7-kW pump where...Ch. 7.13 - Water enters the pump of a steam power plant as...Ch. 7.13 - Consider a steam power plant that operates between...Ch. 7.13 - Saturated refrigerant-134a vapor at 15 psia is...Ch. 7.13 - Helium gas is compressed from 16 psia and 85F to...Ch. 7.13 - Nitrogen gas is compressed from 80 kPa and 27C to...Ch. 7.13 - Describe the ideal process for an (a) adiabatic...Ch. 7.13 - Is the isentropic process a suitable model for...Ch. 7.13 - On a T-s diagram, does the actual exit state...Ch. 7.13 - Argon gas enters an adiabatic turbine at 800C and...Ch. 7.13 - Steam at 100 psia and 650F is expanded...Ch. 7.13 - Combustion gases enter an adiabatic gas turbine at...Ch. 7.13 - Steam at 4 MPa and 350C is expanded in an...Ch. 7.13 - Prob. 120PCh. 7.13 - Prob. 121PCh. 7.13 - Refrigerant-134a enters an adiabatic compressor as...Ch. 7.13 - The adiabatic compressor of a refrigeration system...Ch. 7.13 - Prob. 125PCh. 7.13 - Argon gas enters an adiabatic compressor at 14...Ch. 7.13 - Prob. 127PCh. 7.13 - Air enters an adiabatic nozzle at 45 psia and 940F...Ch. 7.13 - An adiabatic diffuser at the inlet of a jet engine...Ch. 7.13 - Hot combustion gases enter the nozzle of a...Ch. 7.13 - The exhaust nozzle of a jet engine expands air at...Ch. 7.13 - Prob. 133PCh. 7.13 - Refrigerant-134a is expanded adiabatically from...Ch. 7.13 - A frictionless pistoncylinder device contains...Ch. 7.13 - Prob. 136PCh. 7.13 - Steam enters an adiabatic turbine steadily at 7...Ch. 7.13 - Prob. 138PCh. 7.13 - Oxygen enters an insulated 12-cm-diameter pipe...Ch. 7.13 - Water at 20 psia and 50F enters a mixing chamber...Ch. 7.13 - Prob. 141PCh. 7.13 - Prob. 142PCh. 7.13 - In a dairy plant, milk at 4C is pasteurized...Ch. 7.13 - Steam is to be condensed in the condenser of a...Ch. 7.13 - An ordinary egg can be approximated as a...Ch. 7.13 - Prob. 146PCh. 7.13 - In a production facility, 1.2-in-thick, 2-ft 2-ft...Ch. 7.13 - Prob. 148PCh. 7.13 - Prob. 149PCh. 7.13 - Prob. 150PCh. 7.13 - Prob. 151PCh. 7.13 - Prob. 152PCh. 7.13 - Prob. 153PCh. 7.13 - Liquid water at 200 kPa and 15C is heated in a...Ch. 7.13 - Prob. 155PCh. 7.13 - Prob. 157PCh. 7.13 - Prob. 158PCh. 7.13 - Prob. 159PCh. 7.13 - Prob. 160PCh. 7.13 - The compressed-air requirements of a plant are met...Ch. 7.13 - Prob. 162PCh. 7.13 - The space heating of a facility is accomplished by...Ch. 7.13 - Prob. 164PCh. 7.13 - Prob. 165PCh. 7.13 - Prob. 166PCh. 7.13 - Prob. 167RPCh. 7.13 - A refrigerator with a coefficient of performance...Ch. 7.13 - What is the minimum internal energy that steam can...Ch. 7.13 - Prob. 170RPCh. 7.13 - What is the maximum volume that 3 kg of oxygen at...Ch. 7.13 - A 100-lbm block of a solid material whose specific...Ch. 7.13 - Prob. 173RPCh. 7.13 - A pistoncylinder device initially contains 15 ft3...Ch. 7.13 - A pistoncylinder device contains steam that...Ch. 7.13 - Prob. 176RPCh. 7.13 - Prob. 177RPCh. 7.13 - Prob. 178RPCh. 7.13 - A 0.8-m3 rigid tank contains carbon dioxide (CO2)...Ch. 7.13 - Air enters the evaporator section of a window air...Ch. 7.13 - Prob. 181RPCh. 7.13 - Prob. 182RPCh. 7.13 - Prob. 183RPCh. 7.13 - Prob. 184RPCh. 7.13 - Helium gas is throttled steadily from 400 kPa and...Ch. 7.13 - Determine the work input and entropy generation...Ch. 7.13 - Prob. 187RPCh. 7.13 - Reconsider Prob. 7187. Determine the change in the...Ch. 7.13 - Prob. 189RPCh. 7.13 - Air enters a two-stage compressor at 100 kPa and...Ch. 7.13 - Three kg of helium gas at 100 kPa and 27C are...Ch. 7.13 - Steam at 6 MPa and 500C enters a two-stage...Ch. 7.13 - Prob. 193RPCh. 7.13 - Prob. 194RPCh. 7.13 - Refrigerant-134a enters a compressor as a...Ch. 7.13 - Prob. 196RPCh. 7.13 - Prob. 197RPCh. 7.13 - Prob. 198RPCh. 7.13 - Prob. 199RPCh. 7.13 - Prob. 200RPCh. 7.13 - Prob. 201RPCh. 7.13 - Prob. 202RPCh. 7.13 - Prob. 203RPCh. 7.13 - Prob. 204RPCh. 7.13 - Prob. 205RPCh. 7.13 - Prob. 206RPCh. 7.13 - Prob. 207RPCh. 7.13 - Prob. 208RPCh. 7.13 - (a) Water flows through a shower head steadily at...Ch. 7.13 - Prob. 211RPCh. 7.13 - Prob. 212RPCh. 7.13 - Prob. 213RPCh. 7.13 - Consider the turbocharger of an internal...Ch. 7.13 - Prob. 215RPCh. 7.13 - Prob. 216RPCh. 7.13 - A 5-ft3 rigid tank initially contains...Ch. 7.13 - Prob. 218RPCh. 7.13 - Show that the difference between the reversible...Ch. 7.13 - Demonstrate the validity of the Clausius...Ch. 7.13 - Consider two bodies of identical mass m and...Ch. 7.13 - Consider a three-stage isentropic compressor with...Ch. 7.13 - Prob. 223RPCh. 7.13 - Prob. 224RPCh. 7.13 - Prob. 225RPCh. 7.13 - The polytropic or small stage efficiency of a...Ch. 7.13 - Steam is condensed at a constant temperature of...Ch. 7.13 - Steam is compressed from 6 MPa and 300C to 10 MPa...Ch. 7.13 - An apple with a mass of 0.12 kg and average...Ch. 7.13 - A pistoncylinder device contains 5 kg of saturated...Ch. 7.13 - Argon gas expands in an adiabatic turbine from 3...Ch. 7.13 - A unit mass of a substance undergoes an...Ch. 7.13 - A unit mass of an ideal gas at temperature T...Ch. 7.13 - Heat is lost through a plane wall steadily at a...Ch. 7.13 - Air is compressed steadily and adiabatically from...Ch. 7.13 - Argon gas expands in an adiabatic turbine steadily...Ch. 7.13 - Water enters a pump steadily at 100 kPa at a rate...Ch. 7.13 - Air is to be compressed steadily and...Ch. 7.13 - Helium gas enters an adiabatic nozzle steadily at...Ch. 7.13 - Combustion gases with a specific heat ratio of 1.3...Ch. 7.13 - Steam enters an adiabatic turbine steadily at 400C...Ch. 7.13 - Liquid water enters an adiabatic piping system at...Ch. 7.13 - Liquid water is to be compressed by a pump whose...Ch. 7.13 - Steam enters an adiabatic turbine at 8 MPa and...Ch. 7.13 - Helium gas is compressed steadily from 90 kPa and...Ch. 7.13 - Helium gas is compressed from 1 atm and 25C to a...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Power Plant Explained | Working Principles; Author: RealPars;https://www.youtube.com/watch?v=HGVDu1z5YQ8;License: Standard YouTube License, CC-BY