Fundamentals of Thermal-Fluid Sciences
Fundamentals of Thermal-Fluid Sciences
5th Edition
ISBN: 9780078027680
Author: Yunus A. Cengel Dr., Robert H. Turner, John M. Cimbala
Publisher: McGraw-Hill Education
bartleby

Videos

Question
Book Icon
Chapter 8, Problem 182RQ

a)

To determine

The final temperature in each tank A and tank B.

a)

Expert Solution
Check Mark

Explanation of Solution

Given:

The volume of the tank A (vA) is 0.3 m3

The pressure of the tank A (PA) is 400 kPa.

The quality of the tank A(x)A is 60%.

The mass of the tank B (mB) is 2 kg.

The pressure of the tank (PB) is 200 kPa.

The temperature of the tank (TB) is 250°C.

The pressure of the tank A after the mixture is 200 kPa.

The heat transfer to surrounding is 300 kJ.

The surrounding temperature (Tsurr) is 17°C.

Calculation:

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties of water at initial pressure (P1A) of 400 kPa in tank A as follows:

vf=0.001084 m3/kgvg=0.46242 m3/kguf=604.22 kJ/kg

ufg=1948.9 kJ/kgsf=1.7765 kJ/kgKsfg=5.1191 kJ/kgK

Calculate the specific volume (v).

v=vf+x(vgvf)        (I)

v1,A=0.001084 m3/kg+0.6(0.46242 m3/kg0.001084 m3/kg)v1,A=0.27788 m3/kg

Calculate the specific internal energy of steam from tables (u).

u=uf+x(ugf)        (II)

u1,A=604.22 kJ/kg+0.6(1948.9 kJ/kg)u1,A=1773.6 kJ/kg

Write the formula to calculate the specific entropy of steam from tables (s).

s=sf+x(sgf)        (III)

s1,A=1.7765 kJ/kgK+0.6(5.1191 kJ/kgK)s1,A=4.8479 kJ/kgK

Refer Table A-5, “Saturated water-Pressure table”, obtain the following properties of water at final pressure (P2A) of 200 kPa in tank A as follows:

T2A=Tsat=120.2°Cvf=0.001061 m3/kgvg=0.8858 m3/kguf=504.50 kJ/kg

ufg=2024.6 kJ/kgsf=1.5302 kJ/kgKsfg=5.5968 kJ/kgK

Here, final temperature of steam in tank A is T2A.

The steam in tank A undergoes isentropic process, Thus, the final specific entropy of steam in tank A(s2A) is expressed as:

  s2A=s1A

Substitute s2A=4.8479 kJ/kgK, sf=1.5302 kJ/kgK, and sfg=5.5968 kJ/kgK in Equation (III)  to obtain the final dryness fraction of steam in tank A(x2,A).

  x2,A=4.8479 kJ/kgK1.5302 kJ/kgK5.5968 kJ/kgKx2,A=0.5928

Substitute vf=0.001061 m3/kg, vg=0.8858 m3/kg, and x2,A=0.5928 in Equation (I) to obtain the final specific volume of steam in tank A(v2,A).

  v2,A=0.001061 m3/kg+0.5928(0.8858 m3/kg)v2,A=0.52552 m3/kg

Substitute uf=504.50 kJ/kg, ufg=2024.6 kJ/kg, and x2,A=0.5928 in Equation (II) to obtain the final specific internal energy of steam in tank A(u2,A).

  u2,A=504.50 kJ/kg+0.5928(2024.6 kJ/kg)u2,A=1704.7 kJ/kg

Refer Table A-6, “Superheated water”, note the properties for steam in tank B initially at the pressure of 200 kPa and temperature of 250°C as follows:

  v1,B=1.1989 m3/kgu1,B=2731.4 kJ/kgs1,B=7.7100 kJ/kgK

Calculate the mass of the steam (m).

  m=νv        (IV)

  m1,A=0.3 m30.27788 m3/kgm1,A=1.08 kg

Calculate the final mass of steam in tank A(m2,A) using equation (IV).

  m2,A=0.3 m30.52552 m3/kgm2,A=0.5709 kg

Write the expression for the mass balance.

  Δm=minmout        (V)

Here, mass of the water entering into the system is min, the mass of water leaving out of the system is mout and the change in mass is Δm.

Substitute m1,A=1.080 kg and m2,A=0.5709 kg using Equation (V) to calculate the mass of steam flows into tank B from tank A(ΔmA).

ΔmA=1.08 kg0.5709 kgΔmA=0.5091 kg

Rewrite the Equation (V) to calculate the final total mass of steam in tank B(m2,B).

m2,B=m1,B+ΔmA        (VI)

m2,B=2 kg+0.5091 kgm2,B=2.5091 kg

Substitute m1,B=2 kg and v1,B=1.1989 m3/kg in Equation (IV) to obtain the volume of steam in tank B(νB).

  νB=2 kg(1.1989 m3/kg)νB=2.3978 m3

Substitute νB=2.3978 m3 and m2,B=2.5091 kg in Equation (IV) to calculate the final specific volume of steam in tank B(v2,B).

  v2,B=2.3978 m32.5091 kgv2,B=0.9558 m3/kg

Write the expression for the energy balance Equation for a closed system.

  EinEout=ΔEsystem        (VII)

Here, net energy transfer into the control volume is Ein, net energy transfer exit from the control volume is Eout and change in internal energy of the system is ΔEsystem

From first law of thermodynamics, Re-write the Equation (VII) for heat transfer (Q) as follows:

QW=ΔUQW=(ΔU)A+(ΔU)B

QW=(m2,Au2,Am1,Au1,A)+(m2,Bu2,Bm1,Bu1,B)

  300 kJ0=[(0.5709 kg×1704.7 kJ/kg1.08 kg×1773.6 kJ/kg)+(2.5091 kg(u2,B)2 kg×2731.4 kJ/kg)]u2,B=2433.3 kJ/kg

Refer Table A-5, “Saturated water-Temperature table”, obtain the following properties of water at u2,B of 2433.3 kJ/kg and v2,B of 0.9558 m3/kg as follows:

  T2,B=116.1°Cs2,B=6.9156 kJ/kgK

Here, the temperature of the steam in tank at final state is T2,B, and the specific entropy of steam in tank B finally is s2,B.

Thus, the final temperature of steam in tank A is 120.2°C, and final temperature of steam in tank B is 116.1°C.

b)

To determine

The entropy generated during the process.

b)

Expert Solution
Check Mark

Explanation of Solution

Write the expression for the entropy balance Equation of the system.

  S˙inS˙out+S˙gen=ΔS˙system        (VIII)

Here, rate of net entropy in is S˙in, rate of net entropy out is S˙out, rate of entropy generation is S˙gen and change of entropy of the system is ΔS˙system

Re-write the Equation (VIII) to obtain the entropy generated (Sgen) during the process.

QTsurr+Sgen=ΔSA+ΔSBSgen=ΔSA+ΔSBQTsurr

Sgen=(m2,As2,Am1,As1,A)+(m2,Bs2,Bm1,Bs1,B)QTsurr

Sgen={[(0.5709 kg×4.8479 kJ/kgK)(1.08 kg×4.8479 kJ/kgK)]+[(2.5091 kg×6.9156 kJ/kgK)(2 kg×7.7100 kJ/kgK)](300 kJ)17°C}={[(0.5709 kg×4.8479 kJ/kgK)(1.08 kg×4.8479 kJ/kgK)]+[(2.5091 kg×6.9156 kJ/kgK)(2 kg×7.7100 kJ/kgK)]+300 kJ(17+273)K}=0.498 kJ/K

Thus, the entropy generated during this process is 0.498 kJ/K.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Chapter 8 Solutions

Fundamentals of Thermal-Fluid Sciences

Ch. 8 - Prob. 11PCh. 8 - A piston–cylinder device contains superheated...Ch. 8 - The entropy of steam will (increase, decrease,...Ch. 8 - Prob. 14PCh. 8 - Prob. 15PCh. 8 - Prob. 16PCh. 8 - Prob. 17PCh. 8 - What three different mechanisms can cause the...Ch. 8 - A completely reversible heat engine operates with...Ch. 8 - Air is compressed by a 15-kW compressor from P1 to...Ch. 8 - Heat in the amount of 100 kJ is transferred...Ch. 8 - In Prob. 8–21, assume that the heat is transferred...Ch. 8 - Prob. 23PCh. 8 - Prob. 24PCh. 8 - Prob. 25PCh. 8 - Prob. 26PCh. 8 - Prob. 27PCh. 8 - Is a process that is internally reversible and...Ch. 8 - Prob. 29PCh. 8 - Prob. 30PCh. 8 - Prob. 31PCh. 8 - Prob. 32PCh. 8 - An insulated piston–cylinder device contains 5 L...Ch. 8 - Prob. 34PCh. 8 - Water vapor enters a turbine at 6 MPa and 400°C,...Ch. 8 - Prob. 36PCh. 8 - Prob. 37PCh. 8 - Prob. 38PCh. 8 - Prob. 40PCh. 8 - A rigid tank contains 5 kg of saturated vapor...Ch. 8 - Prob. 42PCh. 8 - Determine the heat transfer, in kJ/kg, for the...Ch. 8 - Calculate the heat transfer, in Btu/lbm, for the...Ch. 8 - Prob. 46PCh. 8 - Prob. 47PCh. 8 - Prob. 49PCh. 8 - Prob. 50PCh. 8 - Prob. 51PCh. 8 - 2-kg of saturated water vapor at 600 kPa are...Ch. 8 - Prob. 53PCh. 8 - Prob. 54PCh. 8 - Prob. 55PCh. 8 - A piston–cylinder device contains 5 kg of steam at...Ch. 8 - Prob. 57PCh. 8 - Prob. 58PCh. 8 - Prob. 59PCh. 8 - Prob. 60PCh. 8 - Prob. 61PCh. 8 - Prob. 62PCh. 8 - Prob. 63PCh. 8 - Prob. 65PCh. 8 - Prob. 66PCh. 8 - Prob. 67PCh. 8 - Prob. 68PCh. 8 - An ideal gas undergoes a process between two...Ch. 8 - Prob. 70PCh. 8 - Prob. 71PCh. 8 - Which of the two gases—helium or...Ch. 8 - Air is expanded from 2000 kPa and 500°C to 100 kPa...Ch. 8 - What is the difference between the entropies of...Ch. 8 - Prob. 75PCh. 8 - Prob. 76PCh. 8 - Prob. 77PCh. 8 - Prob. 78PCh. 8 - Air is compressed steadily by a 5-kW compressor...Ch. 8 - Prob. 81PCh. 8 - A mass of 25 lbm of helium undergoes a process...Ch. 8 - Prob. 84PCh. 8 - Prob. 85PCh. 8 - Air at 3.5 MPa and 500°C is expanded in an...Ch. 8 - Prob. 87PCh. 8 - Prob. 88PCh. 8 - Prob. 89PCh. 8 - Prob. 90PCh. 8 - Prob. 91PCh. 8 - Prob. 92PCh. 8 - Prob. 93PCh. 8 - Prob. 94PCh. 8 - Prob. 95PCh. 8 - Prob. 96PCh. 8 - Prob. 97PCh. 8 - Prob. 98PCh. 8 - Prob. 99PCh. 8 - Prob. 100PCh. 8 - Prob. 101PCh. 8 - Prob. 102PCh. 8 - Prob. 103PCh. 8 - Prob. 104PCh. 8 - Prob. 105PCh. 8 - Prob. 106PCh. 8 - Prob. 107PCh. 8 - Prob. 109PCh. 8 - Prob. 110PCh. 8 - Prob. 111PCh. 8 - Steam at 100 psia and 650°F is expanded...Ch. 8 - Prob. 113PCh. 8 - Prob. 114PCh. 8 - Prob. 115PCh. 8 - Prob. 116PCh. 8 - Carbon dioxide enters an adiabatic compressor at...Ch. 8 - Prob. 119PCh. 8 - Prob. 120PCh. 8 - Prob. 122PCh. 8 - Prob. 123PCh. 8 - Prob. 124PCh. 8 - The exhaust nozzle of a jet engine expands air at...Ch. 8 - An adiabatic diffuser at the inlet of a jet engine...Ch. 8 - Hot combustion gases enter the nozzle of a...Ch. 8 - Refrigerant-134a is expanded adiabatically from...Ch. 8 - Prob. 130PCh. 8 - Prob. 131PCh. 8 - Prob. 132PCh. 8 - Prob. 133PCh. 8 - Prob. 134PCh. 8 - Prob. 135PCh. 8 - Prob. 136PCh. 8 - Prob. 137PCh. 8 - Prob. 138PCh. 8 - Prob. 139PCh. 8 - Prob. 140PCh. 8 - Prob. 141PCh. 8 - Prob. 142PCh. 8 - Prob. 143PCh. 8 - Prob. 144PCh. 8 - Prob. 145PCh. 8 - Prob. 146PCh. 8 - Prob. 147PCh. 8 - Prob. 148PCh. 8 - Prob. 149PCh. 8 - Prob. 150PCh. 8 - Prob. 151PCh. 8 - Prob. 152PCh. 8 - Prob. 153PCh. 8 - Prob. 154PCh. 8 - Prob. 155RQCh. 8 - Prob. 156RQCh. 8 - Prob. 157RQCh. 8 - Prob. 158RQCh. 8 - Prob. 159RQCh. 8 - Prob. 160RQCh. 8 - Prob. 161RQCh. 8 - Prob. 162RQCh. 8 - Prob. 163RQCh. 8 - Prob. 164RQCh. 8 - Prob. 165RQCh. 8 - Prob. 166RQCh. 8 - Prob. 167RQCh. 8 - Prob. 168RQCh. 8 - Prob. 169RQCh. 8 - Prob. 170RQCh. 8 - Prob. 171RQCh. 8 - Prob. 172RQCh. 8 - Prob. 173RQCh. 8 - Determine the work input and entropy generation...Ch. 8 - Prob. 175RQCh. 8 - Prob. 176RQCh. 8 - Prob. 177RQCh. 8 - Prob. 178RQCh. 8 - Prob. 180RQCh. 8 - Prob. 181RQCh. 8 - Prob. 182RQCh. 8 - A 1200-W electric resistance heating element whose...Ch. 8 - Prob. 184RQCh. 8 - Prob. 185RQCh. 8 - Prob. 186RQCh. 8 - Prob. 187RQCh. 8 - Prob. 188RQCh. 8 - Prob. 189RQCh. 8 - Prob. 190RQCh. 8 - Consider a 50-L evacuated rigid bottle that is...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Power Plant Explained | Working Principles; Author: RealPars;https://www.youtube.com/watch?v=HGVDu1z5YQ8;License: Standard YouTube License, CC-BY