A skateboarder with his board can be modeled as a particle of mass 76.0 kg, located at his center of mass (which we will study in Chapter 9). As shown in Figure P8.49, the skateboarder starts from rest in a crouch-ing position at one lip of a half-pipe (point Ⓐ). The half-pipe is one half of a cylinder of radius 6.80 m with its axis horizontal. On his descent, the skateboarder moves without friction so that his center of mass moves through one quarter of a circle of radius 630 m. (a) Find his speed at the bottom of the half-pipe (point Ⓑ (b) Immediately after passing point Ⓑhe stands up and raises his arms, lifting his center of mass from 0.500 in to 0.950 m above the concrete (point ©). Next, the skateboarder glides upward with his center of mass moving in a quarter circle of radius 5.85 m. His body is horizontal when he passes point Ⓓ, the far lip of the half-pipe. As he passes through point Ⓓ, the speed of the skateboarder is 5.14 m/s. How much chemical potential energy in the body of the skateboarder was converted to mechanical energy in the skateboarder—Earth system when he stood up at point Ⓑ? (c) How high above point Ⓓ does he rise? Caution: Do not try this stunt yourself without the required skill and protective equipment.
Figure P8.49
(a)
The speed at the bottom of the half pipe.
Answer to Problem 8.49AP
The speed at the bottom of the half pipe is
Explanation of Solution
Given info: The mass of the particle is
The formula to calculate the initial gravitational potential energy of the particle at point
Here,
Thus, the initial gravitational potential energy of the particle at point
The formula to calculate the gravitational potential energy is,
Here,
The height of the particle at point
Substitute 0 for
Thus, the gravitational potential energy at point
The formula to calculate the initial kinetic energy of the particle is,
Here,
The initial velocity of the particle is 0 as the particle is at rest then the kinetic energy at point
Substitute 0 for
Thus, the kinetic energy of the particle at point
The formula to calculate the kinetic energy of the particle at point
Here,
Thus, the kinetic energy at point
The formula to calculate the law of conservation of energy is,
Here,
Substitute
Substitute
Rearrange the above formula for
Substitute
Conclusion:
Therefore, the speed at the bottom of the half pipe is
(b)
The amount of chemical potential energy converted into mechanical energy in the skateboarder- Earth system when he stood up at point
Answer to Problem 8.49AP
The amount of chemical potential energy converted into mechanical energy in the skateboarder- Earth system when he stood up at point
Explanation of Solution
Given info: The mass of the particle is
The formula to calculate the centripetal acceleration of the particle at the point
Here,
Substitute
Thus, the centripetal acceleration of the particle at point
The formula to calculate the normal force acting on the particle at point
Here,
Substitute
Thus, the value of normal force acting on the particle at point
The formula to calculate the chemical energy of the skateboarder converted into mechanical energy at point
Here,
Substitute
Conclusion:
Therefore, the amount of chemical potential energy converted into mechanical energy in the skateboarder- Earth system when he stood up at point
(c)
The height above point
Answer to Problem 8.49AP
The height above point
Explanation of Solution
Given info: The mass of the particle is
The formula to calculate the initial gravitational potential energy of the particle at point
Here,
Thus, the initial gravitational potential energy of the particle at point
The formula to calculate the gravitational potential energy is,
Here,
Thus, the gravitational potential energy at point
The formula to calculate the initial kinetic energy of the particle is,
Here,
Thus, the kinetic energy of the particle at point
The formula to calculate the kinetic energy of the particle at point
Here,
Thus, the kinetic energy at point
The formula to calculate the law of conservation of energy is,
Here,
Substitute
Substitute
Substitute
Conclusion:
Therefore, the height above point
Want to see more full solutions like this?
Chapter 8 Solutions
EBK PHYSICS:F/SCI.+ENGRS.,TECH.UPDATED
- A solid sphere of radius 10 cm is allowed to rotate freely about an axis. The sphere is given a sharp blow so that its center of mass starts from the position shown in the following figure with speed 15 cm/s. What is the maximum angle that the diameter makes with the vertical?arrow_forwardA long, thin rod of mass m = 5.00 kg and length = 1.20 m rotates around an axis perpendicular to the rod with an angularspeed of 3.00 rad/s. a. What is the angular momentum of therod if the axis passes through the rods midpoint? b. What is theangular momentum of the rod if the axis passes through a pointhalfway between its midpoint and its end?arrow_forwardTwo astronauts (Fig. P10.67), each having a mass M, are connected by a rope of length d having negligible mass. They are isolated in space, orbiting their center of mass at speeds v. Treating the astronauts as particles, calculate (a) the magnitude of the angular momentum of the two-astronaut system and (b) the rotational energy of the system. By pulling on the rope, one of the astronauts shortens the distance between them to d/2. (c) What is the new angular momentum of the system? (d) What are the astronauts new speeds? (e) What is the new rotational energy of the system? (f) How much chemical potential energy in the body of the astronaut was converted to mechanical energy in the system when he shortened the rope? Figure P10.67 Problems 67 and 68.arrow_forward
- To develop muscle tone, a woman lifts a 2.00-kg weight held in her hand. She uses her biceps muscle to flex the lower arm through an angle of 60.0°. (a) What is the angular acceleration if the weight is 24.0 cm from the elbow joint, her forearm has a moment of inertia of 0.250kg-m2 and the net force she exerts is 750 N at an effective perpendicular lever arm of 2.00 cm? (b) How much work does she do?arrow_forwardA wad of sticky clay with mass m and velocity vi is fired at a solid cylinder of mass M and radius R (Fig. P10.75). The cylinder is initially at rest and is mounted on a fixed horizontal axle that runs through its center of mass. The line of motion of the projectile is perpendicular to the axle and at a distance d R from the center. (a) Find the angular speed of the system just after the clay strikes and sticks to the surface of the cylinder. (b) Is the mechanical energy of the claycylinder system constant in this process? Explain your answer. (c) Is the momentum of the claycylinder system constant in this process? Explain your answer. Figure P10.75arrow_forwardA buzzard (m = 9.29 kg) is flying in circular motion with aspeed of 8.44 m/s while viewing its meal below. If the radius ofthe buzzards circular motion is 8.00 m, what is the angularmomentum of the buzzardaround the center of its motion?arrow_forward
- The mass of a hoop of radius 1.0 m is 6.0 kg. It rolls across a horizontal surface with a speed of 10.0 m/s. (a) How much work is required to stop the hoop? (b) If the hoop starts up a surface at 30 to the horizontal with a speed of 10.0 m/s, how far along the incline will it travel before stopping and rolling back down?arrow_forwardA giant swing at an amusement park consists of a 365-kg uniform arm 10.0 m long, with two seats of negligible mass connected at the lower end of the arm (Fig. P8.53). (a) How far from the upper end is the center of mass of the arm? (b) The gravitational potential energy of the arm is the same as if all its mass were concentrated at the center of mass. If the arm is raised through a 45.0 angle, find the gravitational potential energy, where the zero level is taken to be 10.0 m below the axis, (c) The arm drops from rest from the position described in part (b). Find the gravitational potential energy of the system when it reaches the vertical orientation. (d) Find the speed of the seats at the bottom of the swing.arrow_forwardFigure OQ10.6 shows a system of four particles joined by light, rigid rods. Assume a = b and M is larger than m. About which of the coordinate axes does the system have (i) the smallest and (ii) the largest moment of inertia? (a) the x axis (b) the y axis (c) the z axis, (d) The moment of inertia is the same small value for two axes, (e) The moment of inertia is the same for all three axes.arrow_forward
- Physics for Scientists and Engineers, Technology ...PhysicsISBN:9781305116399Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPrinciples of Physics: A Calculus-Based TextPhysicsISBN:9781133104261Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningCollege PhysicsPhysicsISBN:9781285737027Author:Raymond A. Serway, Chris VuillePublisher:Cengage Learning
- Glencoe Physics: Principles and Problems, Student...PhysicsISBN:9780078807213Author:Paul W. ZitzewitzPublisher:Glencoe/McGraw-HillPhysics for Scientists and Engineers with Modern ...PhysicsISBN:9781337553292Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPhysics for Scientists and EngineersPhysicsISBN:9781337553278Author:Raymond A. Serway, John W. JewettPublisher:Cengage Learning