Materials Science And Engineering Properties
1st Edition
ISBN: 9781111988609
Author: Charles Gilmore
Publisher: Cengage Learning
expand_more
expand_more
format_list_bulleted
Question
Chapter 9, Problem 9.19P
(a)
To determine
The stress in material for the displacement at time
(b)
To determine
The stress in material after one day.
Expert Solution & Answer
Want to see the full answer?
Check out a sample textbook solutionStudents have asked these similar questions
A rectangular block of aluminum 30 mm * 60 mm * 90 mm is placed in a pressure chamber and subjected to a pressure of 100 MPa. If the modulus of elasticity is 70 GPa and Poisson’s ratio is 0.333, what will be the decrease in the longest side of the block, assuming that the material remains within the linear elastic region? What will be the decrease in the volume of the block?
steel rod, which is free to move, has a length of 200 mm and diameter of20 mm at a temperature of 15°C. If the rod is heated uniformly to 115°C,determine the length and the diameter of this rod to the nearest micron atthe new temperature if the linear coefficient of thermal expansion of steel is12.5 X 10-6 m/m/°C. Is there a stress on the rod at 115°C?
A liquid has a specific weight of 48 lb/ft^3 and a dynamic viscosity of 3.05 lb-s/ft^2. What is the kinematic viscosity (ft^2/s)?
Chapter 9 Solutions
Materials Science And Engineering Properties
Ch. 9 - Prob. 1CQCh. 9 - Prob. 2CQCh. 9 - Prob. 3CQCh. 9 - Prob. 4CQCh. 9 - Prob. 5CQCh. 9 - Prob. 6CQCh. 9 - Prob. 7CQCh. 9 - Prob. 8CQCh. 9 - Prob. 9CQCh. 9 - Prob. 10CQ
Ch. 9 - Prob. 11CQCh. 9 - Prob. 12CQCh. 9 - Prob. 13CQCh. 9 - At temperatures above the equi-cohesive...Ch. 9 - Prob. 15CQCh. 9 - Prob. 16CQCh. 9 - Prob. 17CQCh. 9 - Prob. 18CQCh. 9 - Prob. 19CQCh. 9 - Prob. 20CQCh. 9 - Prob. 21CQCh. 9 - Prob. 22CQCh. 9 - Prob. 23CQCh. 9 - Prob. 24CQCh. 9 - Prob. 25CQCh. 9 - Prob. 26CQCh. 9 - Prob. 27CQCh. 9 - Prob. 28CQCh. 9 - Prob. 29CQCh. 9 - Prob. 30CQCh. 9 - Prob. 31CQCh. 9 - Prob. 32CQCh. 9 - Prob. 33CQCh. 9 - Prob. 34CQCh. 9 - Prob. 35CQCh. 9 - Prob. 1ETSQCh. 9 - Prob. 2ETSQCh. 9 - Prob. 3ETSQCh. 9 - Prob. 4ETSQCh. 9 - Prob. 5ETSQCh. 9 - Prob. 6ETSQCh. 9 - Prob. 7ETSQCh. 9 - Prob. 8ETSQCh. 9 - Prob. 9ETSQCh. 9 - Prob. 10ETSQCh. 9 - Prob. 11ETSQCh. 9 - Prob. 12ETSQCh. 9 - Prob. 9.1PCh. 9 - Prob. 9.2PCh. 9 - Prob. 9.3PCh. 9 - Prob. 9.4PCh. 9 - Prob. 9.5PCh. 9 - Prob. 9.6PCh. 9 - Prob. 9.7PCh. 9 - Prob. 9.8PCh. 9 - Prob. 9.9PCh. 9 - Prob. 9.10PCh. 9 - For silver at a tensile stress of 7 MPa and a...Ch. 9 - For germanium at a tensile stress of 410 MPa and a...Ch. 9 - Prob. 9.13PCh. 9 - Prob. 9.14PCh. 9 - Prob. 9.15PCh. 9 - Prob. 9.16PCh. 9 - Prob. 9.17PCh. 9 - Prob. 9.18PCh. 9 - Prob. 9.19PCh. 9 - Prob. 9.20PCh. 9 - Prob. 9.21PCh. 9 - Prob. 9.22P
Knowledge Booster
Similar questions
- A steel rod, which is free to move, has a length of 200 mm and diameter of20 mm at a temperature of 15°C. If the rod is heated uniformly to 115°C,determine the length and the diameter of this rod to the nearest micron atthe new temperature if the linear coefficient of thermal expansion of steel is12.5 * 10-6 m/m/°C. Is there a stress on the rod at 115°C?arrow_forwardA cube made of an alloy with dimensions of 50 mm * 50 mm * 50 mm is placed into a pressure chamber and subjected to a pressure of 90 MPa. If the modulus of elasticity of the alloy is 100 GPa and Poisson’s ratio is 0.28, what will be the length of each side of the cube, assuming that the material remains within the elastic region?arrow_forwardA 4-m-long steel plate with a rectangular cross section (10 mm * 50 mm) is resting on a frictionless surface under the sun. The plate temperature is meas-ured to be at 40°C. The plate is then moved into a cold room and is left to rest on a frictionless surface. After several hours, the plate temperature is meas-ured to be at 5°C. The steel has a modulus of elasticity equal to 200 GPa and a coefficient of thermal expansion equal to 1.1 * 10-5m/m/°C. a. What is the length of shrinkage?b. What tension load is needed to return the length to the original value of 4meters?c. What is the longitudinal strain under this load?arrow_forward
- the cross-sectional area of the bar 1 of the two bars supported on the left and right sides is 1.2 cm^2, the coefficient of thermal expansion is 20.9 10^(-6)/K; The cross-sectional area of bar 2 is 3 cm^2 and its coefficient of thermal expansion is 25.4 10^(-6)/K. Since the modulus of elasticity of the material is 207 GPa, these two bars are heated to 99 °C.a) What will be the change in length (mm) of bar 1?b) What is the stress in bar 1 in MPa?c) What is the stress in bar 2 in MPa?arrow_forwardDetermine the bulk modulus of elasticity (in N/m2) of a liquid that decreases in volume by 3% due to an increase in pressure from 1,000 N/cm2 to 21,000 N/cm2arrow_forwardFind the change in volume of 10.00000 ft^3 of water at 80 deg.F. when subjected to a pressure increase of 500 psi. Water's bulk modulus of elasticity at this temperature is approximately 325,000 psi.arrow_forward
- A copper rod with a diameter of 24 mm is subjected to tension within the elastic region. If themodulus of elasticity is 115 GPa and a Poisson’s ratio of 0.34. Determine the force that willproduce a reduction of 0.003 mm in the diameter.arrow_forwardWhat is the significance of stress concentration factor? What are the factors that influence movement of atoms through diffusion in solids?arrow_forwardConsider a cylindrical metal 6 mm in diameter and 50 mm long ispulled in tension. It is known that yield strength and elastic (Young’s) Modulus of thematerial are 200 MPa and 100 GPa, respectively, and its Poisson’s Ratio is 0.3.(a) Determine whether the deformation is elastic or plastic when 6000 N is applied.(b) Calculate specimen elongation (∆l) and reduction in diameter (∆d) when 5000 N isapplied? What are the values ∆l and ∆d when the load is released?(c) If necking occurs at a load of 8850 N, determine the UTS of the metal.(d) Calculate the ductility in terms of % E.L. if the length of the specimen at fracturepoint is 56.0 mm.arrow_forward
- 1 Proof that a solid aluminum block of 4 mm x 3 mm x 3 mm, such as shown in FigureQ1 (a), can float on water at 20 °C due to the effect of surface tension. The density ofthe aluminum block is 2700 kg/m3. Determine the contact angle. 2. A solid alloy cylinder having a diameter of 6.48 cm slides downward at a terminalvelocity of V through a vertical pipe. The downward motion is resisted by an oil filmbetween the piston and the pipe wall. Determine the oil viscosity when the velocityV is 5 m/s. The inner diameter of the vertical pipe is 6.5 cm, and the alloy density is3500 kg/m3.arrow_forwardUsing the intermolecular forces, explain why the freezing and melting point decreases when adding salt to water!arrow_forwardThe pressure of a liquid is increased from 60 N/cm^2 to 100 N/cm^2 and volume decreases by 0.2 percent. Determine the bulk modulus of elasticity in N/cm^2.arrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
- Materials Science And Engineering PropertiesCivil EngineeringISBN:9781111988609Author:Charles GilmorePublisher:Cengage Learning
Materials Science And Engineering Properties
Civil Engineering
ISBN:9781111988609
Author:Charles Gilmore
Publisher:Cengage Learning