cloynes_module05assignmentpcscodingaduit_020324

1. Write a short note on G codes and give any four examples with its application. (Reg. Number Ending with Even Numbers) 2. Write a short note on M codes and give any four examples with its application. (Reg. Number Ending with Zero and Odd Numbers) 3. What is the code used for clockwise circular interpolation, if the tool is mounted in front of the job? (Reg. Number Ending with Even Numbers) 4. What is the comment can be used to specify the dimensions of the job in CNC programming? (Reg. Number Ending with Zero and Odd Numbers)

|Read the problem statement and the solution provided. There may or may not be one or more mistakes in the solution. Go through the solution carefully and then do the following. 1. State if the solution is correct or incorrect 2. If the solution is incorrect, identify what is the mistake in the solution. Be specific and succinct. 3. If the solution is incorrect, provide the final solution with appropriate steps. You can make the corrections directly on a copy of this provided solution, but make sure you clearly explain the corrections. Problem: Consider fully-developed flow of water through a 24-cm diameter tube. The water comes in at 20°C and exits at 40°C. The surface temperature of the tube is uniform at 60°C. The water flow has a mass flow rate of 0.24 kg/s. What is the average convection coefficient of the water flow? Solution: We have T, = 60°C, Tmi = 20°C, Tmo = 40°C, So, the bulk-mean temperature is Tm = 30°C. The appropriate properties are: u = 7.98 × 10-4 kg/ms; k = 0.615…

INSTRUCTIONS: Please write clearly and understandable way. Write all the corresponding GIVEN with their corresponding symbols and units. List all the MISSING/REQUIRED, and list all the FORMULA that will be used. • DRAW/ILLUSTRATE THE DIAGRAM/CIRCUIT OR DRAWINGS that is related to the problem, IF POSSIBLE, which is HIGHLY REQUIRED. The CONVERSION calculations with their corresponding symbols and units is required. The problem's SOLUTION must be solved in a step-by-step, no shortcut, again, with their corresponding symbols and units. • BOXED the Final Answer. PROBLEM: The compressor of a large gas turbine power plant receives 12kg/s of surrounding air at 95kPa and 20°C. At the compressor outlet, air exits at 1.52MPa, 430°C, Determine the flow energy requirements in MW. a) 1.412 b) 2.42 c) 1.01 d) 1.614

I asked for problems 6 and 7 to be answered, but I did not get a properly structured answered as the example shows on problem number 1. Here is the link to the questions I already had answered, could you please rewrite the answer so its properly answered as the example shows (Problem 1)?   https://www.bartleby.com/questions-and-answers/it-vivch-print-reading-for-industry-228-class-date-name-review-activity-112-for-each-local-note-or-c/cadc3f7b-2c2f-4471-842b-5a84bf505857

For the air compressor shown in Figure below, the air enters from a large area and exit from small one, explain why? Instructions for answering this question: The answer to this questian is required as handwritten where you are aiso required to add a Handwritten integrity Statement. Pieose follow the below steps: 1 Write on a blank poper your AUM student ID, full name, course code, section and date 2 Write the following integrity statement and sign: "7 offirm that I have neither given nor received any help on this assessment and that personally compieted it on my own." 3. Write your onswer to the obove question as required 4. Put your Original Civil ID card or AUM ID card on the poper 5 Toke o picture or scan, and uplood Important note: if handwritten document is submitted without the integrity stotement including ID (Civil ID or AUM ID), then the related handwritten question(s) will not be groded.

INSTRUCTIONS: • Please write clearly and understandable way. Write all the corresponding GIVEN with their corresponding symbols and units. • List all the MISSING/REQUIRED, and list all the FORMULA that will be used. DRAW/ILLUSTRATE THE DIAGRAM/CIRCUIT OR DRAWINGS that is related to the problem, IF POSSIBLE, which is HIGHLY REQUIRED. • • The CONVERSION calculations with their corresponding symbols and units is required. • The problem's SOLUTION must be solved in a step-by-step, no shortcut, again, with their corresponding symbols and units. • BOXED the Final Answer. PROBLEM: A 500kg container van is being lowered into the ground when the wire rope supporting it suddenly breaks. The distance from which the container was picked up is 3m. Find the velocity just prior to the impact in m/s assuming the kinetic energy equals the potential energy. a) 5. 672 b) 6.672 c) 7.672 d) 8.672

Show all working explaining detailly each step Answer must be typewritten with a computer keyboard! Answer Q7b

Hi, I could use some help with the following problems for controls. I am trying to get this to work, but I keep getting stuck. I'm trying to review some problems for an upcoming test by using some online resources.

CarpetPlus sells and installs floor covering for commercial buildings. Brad Sweeney, CarpetPlus account executive, was just awarded the contract for five jobs. Brad must now assign a CarpetPlus installation crew to each of the five jobs. Because the commission Brad will earn depends on the profit CarpetPlus makes, Brad would like to determine anassignment that will minimize total installation costs. Currently, five installation crews are available for assignment. Each crew is identified by a color code, which aids in tracking ofjob progress on a large white board. The following table shows the costs (in hundreds of dollars) for each crew to complete each of the five jobs:   Use the Hungarian method to solve the problem

Important instruction: This question uses the last three-digit value (L3D) of individual student matrix number. For example, if the matrix number is CD180264 then the L3D value is 264 (since the last three digits is 264). Some data require multiplication of the L3D value, for examAdditional instruction: These questions use the last three-digit value (L3D) of individual student matrix number. Example, if the matrix number is CD180264 then the L3D value is 264 (since the last three digits is 264). Some data require multiplication of the L3D value, for example 10(L3D) means 10 x L3D.ple 10(L3D) means 10 x L3D.   subject name is

Hello, I have submitted this worksheet for assistance 2x but for some reason it goes white for the answer. Can someone type it out and resend it? Would it be possible to credit those 2 questions back?

You are assigned as the head of the engineering team to work on selecting the right-sized blower that will go on your new line of hybrid vehicles.The fan circulates the warm air on the inside of the windshield to stop condensation of water vapor and allow for maximum visibility during wintertime (see images). You have been provided with some info. and are asked to pick from the bottom table, the right model number(s) that will satisfy the requirement. Your car is equipped with a fan blower setting that allow you to choose between speeds 0, 1,2 and 3. Variation of the convection heat transfer coefficient is dependent upon multiple factors, including the size and the blower configuration.You can only use the following parameters:

Direction: Solve the following problems completely. Include FBD

In Agile: All code should be written before test plans are created in case changes in the code occur Test plans should be written before coding begins All coding should be stopped at a time in the sprint that allows adequate time to write test plans and perform the testing Testing is not a part of the sprint DAD stands for: Direct Agile Discipline Disciplined Agile Delivery Direct Agile Delivery Detailed Agile Delivery

expecting a good handwriting with step by step procedure answer

arrow_forward   Oh no! Our expert couldn't answer your question. Don't worry! We won't leave you hanging. Plus, we're giving you back one question for the inconvenience. Here's what the expert had to say: Hi and thanks for your question! Unfortunately we cannot answer this particular question due to its complexity. We've credited a question back to your account. Apologies for the inconvenience. Ask Your Question Again 5 of 10 questions left until 8/10/20 Question Asked Jul 13, 2020 1 views An air conditioning unit uses Freon (R-22) to adapt an office room at temperature 25 oC in the summer, if the temperature of the evaporator is 16 oC and of the condenser is 48 oC. The reciprocating compressor is single acting, number of cylinders are 2, the volumetric efficiency is 0.9, number of revolutions are 900 r.p.m. and L\D= 1.25. If the compressor consumes a power of 3 kW and its mechanical efficiency is 0.9. Find the following:  (A) Flow rate of the refrigerant per…

TOPIC: STATICS  1. Follow the rule correctly. 2. Solve the asked problem in a step-by-step procedure3. Kindly choose the correct answer on the choices4. Double-check your solutions because we need them for our review. Thank you so much for your kind consideration.

I need problems 6 and 7 solved.  I got it solved on 2 different occasions and it is not worded correctly. NOTE: Problem 1 is an example of how it should be answered. Below are 2 seperate links to same question asked and once again it was not answered correctly. 1. https://www.bartleby.com/questions-and-answers/it-vivch-print-reading-for-industry-228-class-date-name-review-activity-112-for-each-local-note-or-c/cadc3f7b-2c2f-4471-842b-5a84bf505857 2. https://www.bartleby.com/questions-and-answers/it-vivch-print-reading-for-industry-228-class-date-name-review-activity-112-for-each-local-note-or-c/bd5390f0-3eb6-41ff-81e2-8675809dfab1

PLEASE SHOW COMPLETE FBD AND SOLUTION. PROVIDE AN EXPLANATION FOR EACH PROCEDURE.

Answer the following questions: a) Explain the two different ways for port mapping (i.e. connecting signals in module instances). b) What is a test-bench? Why and when do we use it? c) Explain the differences between a Module and a Module Instance in Verilog HDL.

Assignment 1: TIME VALUE OF MONEY Objective: To further understand the concept of the time value of money. INSTRUCTIONS: In cach problem, a. Translate data given in problems into their respective graphical representations - i.e. draw the correct cash flow diagram. b. Write down all pertinent given information or data on your paper. c. Calculate answers correctly. 1. Your spendthrift cousin wants to buy a fancy watch for $425. Instead, you suggest that she buy an inexpensive watch for $25 and save the difference of $400. Your cousin agrees with your idea and invests $400 for 40 years in an account earning 9% interest per year. How much will she accumulate in this account after 40 years have passed?

Nerds complete typed solution with 100 % accuracy.

I need a clear answer by hand, not by keyboard  and fast answer within 20 minutes. Thank you | dybala

I neeeeeed a clear answer by hand, not by keyboard  and fast answer within 20 minutes. Thank you | dybala