Screenshot 2024-03-19 at 1

Answer fast please

Hartley Electronics, Inc., in Nashville, producesshort runs of custom airwave scanners for the defense industry.The owner, Janet Hartley, has asked you to reduce inventory byintroducing a kanban system. After several hours of analysis, youdevelop the following data for scanner connectors used in onework cell. How many kanbans do you need for this connector?Daily demand 1,000 connectorsLead time 2 daysSafety stock 12 dayKanban size 500 connectors

I need help solving this problem.

University Of Babylon College of Mussayb Automobile Production Quiz(2) 2024-205 7. Which classification method considers the number of independent movements a robot can make? 0 0 о a) Classification by Degrees of Freedom b) Classification by Kinematic Structure c) Classification by Drive Technology d) Classification by Workspace Geometry 8. Which classification method focuses on the arrangement of the robot's joints? 。 a) Classification by Degrees of Freedom 。 b) Classification by Kinematic Structure ° c) Classification by Drive Technology od) Classification by Motion Characteristics 9. What is the difference between a robot with 2 Degrees of Freedom (DOF) and one with 6 DOF? о a) The 6 DOF robot can move faster. o b) The 6 DOF robot can move more precisely. o c) The 6 DOF robot can perform more complex tasks. o d) All of the above 10. What are some examples of drive technologies used in robots? 。 a) Hydraulic, pneumatic, and electric о b) Gear, belt, and chain drives o c) Ball screws,…

A nearsighted eye is corrected by placing a diverging lens in front of the eye. The lens will create a virtual image of a distant object at the far point (the farthest an object can be from the eye and still be in focus) of the myopic viewer where it will be clearly seen. In the traditional treatment of myopia, an object at infinity is focused to the far point of the eye. If an individual has a far point of 39.5 cm, prescribe the correct power of the lens that is needed. Assume that the distance from the eye to the lens is negligible.

Can someone please help me to answer all of the following questions thank you!!

Mechatronics Components and Instrumentation MECT361 please write the answer in keypord and please don't late ??

Help!!! Please answer part b correctly like part A. Please!!!!

Show work Part 1 website: https://ophysics.com/r5.html PArt 2 website: https://ophysics.com/r3.html

Basic Manufacturing Process with 2 Job Types + Inspection Time between job arrivals at a machining station is exponentially distributed with mean 4.4 minutes. There are 2 types of jobs to be processed 30% of which is Type 1 and, 70% are of Type 2. Processing times are exponentially distributed. Mean processing time for Type 1 is 4.8 minutes, for Type 2 it is 2.5 minutes. After the job is processed, they go through an inspection process with one single inspector and an inspection time with triangular distribution (1,2,3.5). Inspector decides whether the part is good enough, scrap or should be reworked. 80% of the parts produced is good, 10 % is scrap and the rest needs rework. Rework is done by the same manufacturing machine. The priority among the parts will be Part1 first, part2 second and reworks of both type comes later. Rework time is normally distributed with mean 2 minutes and 0,2 std dev. Simulate the system for one 8-hour day.

I need help solving these 3 simple parts, if you can not answer all 3 parts then please leave it for another tutor, thank you.

Analysis and Interpretation of vertical Ground Reaction Forces. In this study, a volunteer was asked to walk on two force platforms under two different conditions. Condition 1- Normal Walk (NW), condition 2 - walking over an obstacle (ObsW). The right limb was the one to step on platform 1 in both conditions. The force platforms were used to measure the vertical ground reaction forces on the right limb. Data was collected on Vicon (Nexus) software and the attached graphs ( mean NW/ObsW, Mean (+-)1SD NW/ObsW) were created. Analyse ,Interpret the graphs and make a conclusion of the result attached.

Please give me the answers for this i been looking at this for a hour and my head hurts

Assume the Fourier number, Fo, is greater than or equal to 0.2 (note that you still need to calculate the Biot number, and possibly a second Biot number).

Recall that muscle generates force at 30 N/cm?. Two cross sections are taken from the rectus femoris muscle (bipennate muscle similar to the diagram below). The length and width of the first cross section is 6 cm and 5 cm respectively with a 35° angle of pennation. The length and width of the second cross section is 5.6 cm and 3 cm respectively with a 31° angle of pennation. What is the predicted maximum tendon force (FTendon) of this muscle in Newtons? Answer to the nearest 0.1 N. Freodas

University of Babylon Collage of Engineering\Al-Musayab Department of Automobile Engineering Under Grad/Third stage Notes: 1-Attempt Four Questions. 2- Q4 Must be Answered 3-Assume any missing data. 4 تسلم الأسئلة بعد الامتحان مع الدفتر Subject: Mechanical Element Design I Date: 2022\01\25 2022-2023 Time: Three Hours Course 1 Attempt 1 Q1/ Design a thin cylindrical pressure tank (pressure vessel) with hemispherical ends to the automotive industry, shown in figure I below. Design for an infinite life by finding the appropriate thickness of the vessel to carry a sinusoidal pressure varied from {(-0.1) to (6) Mpa}. The vessel is made from Stainless Steel Alloy-Type 316 sheet annealed. The operating temperature is 80 C° and the dimeter of the cylinder is 36 cm. use a safety factor of 1.8. Fig. 1 (15 Marks) Q2/ Answer the following: 1- Derive the design equation for the direct evaluation of the diameter of a shaft to a desired fatigue safety factor, if the shaft subjected to both fluctuated…

This is a graph for an experiment that examines the change in kinetic energy. A mass hanger of 10 g was used for this experiment and this is the graph showing the change in kinetic energy versus distance it travelled.  If another student repeated the experiment, but with a 5 g mass hanger instead, does the acceleration increase? How would this look like in the graph? Please draw a line in this graph to show this scenario.

Truncation errors are increased as the round-off errors are decreased.Group of answer choices True False Say, you have a thermometer and you are checking the temperature of a body that has a temperature of 36o Using your thermometer five times, it gives you the following measurements: 29oC, 29.2oC, 29.3oC, 28.9oC, and 29.1oC. What can we conclude about the accuracy and the precision of the thermometer?Group of answer choices The thermometer is not accurate and not precise The thermometer is faulty. The thermometer is accurate and precise The thermometer is not accurate but precise. Say, you have a thermometer and you are checking the temperature of a body that has a temperature of 36o Using your thermometer five times, it gives you the following measurements: 36oC, 35.6oC, 36oC, 37oC, and 36.2oC. What can we conclude about the accuracy and the precision of the thermometer?Group of answer choices The thermometer is accurate and precise. The thermometer is accurate but not precise. The…

System Specification The aim of task 2 is to design a simulated obstacle detection sensor system for a mobile robot platform. You should assume your chosen sensors will be placed on a small mobile robot platform as designed in task 1. The sensor system must be able to detect objects within the range of 0mm to 1000mm and have a field of vision of 90 degrees (see diagram below). You may need to use multiple sensors to achieve the desired specification. Robot platform H 0-1000mm range 90° sensor view Example object

MECT361 Mechatronics Components and Instrumentation PLEASE GIVE ME THE short answer and wite it by keyword thanks

I need the answer as soon as possible

Technical graphics are the preferred method for communicating designs during a design process. True False

A. A customer asked you to explain your choice of a temperature sensor that you used for his PCB. Initially, there were two sensor options. To compare between them, you decided to test their accuracy and precision. Accuracy of a sensor is a measure of how near its reading is to the real value, the nearer the measured value to the real value the better. While precision is a measure of how widely spread the readings of a sensor are [relative to each other] when measuring the same variable, the narrower the spread the better. So, you tested the two sensors by measuring the same temperature, which was 100 C of boiling water, and you recorder the following 10 measurements of each sensor. Which Sensor has higher accuracy, and which one has higher precision. Sensor Sensor readings when measuring 100 C 99.65 100.05 103 102 99.3 s1 100.1 99.1 100.5 99 98.8 98.78 96.9 101.4 98.88 99 S2 99.12 98.9 99 98.69 99.2

Help!!! Answer it correctly!!! Make sure you solve work on hand!!! Answer correctly Please!!!!!!!

What’s the the answer please

Learning Goal: To use transformation equations to calculate the plane state of stress in a rotated coordinate system. The normal and shear stresses for a state of stress depend on the orientation of the axes. If the stresses are given in one coordinate system (Figure 1), the equivalent stresses in a rotated coordinate system (Figure 2) can be calculated using a set of transformation equations. Both sets of stresses describe the same state of stress. In order to use the transformation equations, a sign convention must be chosen for the normal stresses, shear stresses, and the rotation angle. For the equations below, a positive normal stress acts outward on a face. A positive Try acts in the positive y-direction on the face whose outward normal is in the positive x-direction. The positive direction for the rotation is also shown in the second figure. The stresses in the rotated coordinate system are given by the following equations: στ σy + cos 20+Try sin 20 2 2 σετ συ = σy' cos 20-Try…

Parts a and b were answered in a previous question, part c was unanswered this is the entire question :)

For the air compressor shown in Figure below, the air enters from a large area and exit from small one, explain why? Instructions for answering this question: The answer to this questian is required as handwritten where you are aiso required to add a Handwritten integrity Statement. Pieose follow the below steps: 1 Write on a blank poper your AUM student ID, full name, course code, section and date 2 Write the following integrity statement and sign: "7 offirm that I have neither given nor received any help on this assessment and that personally compieted it on my own." 3. Write your onswer to the obove question as required 4. Put your Original Civil ID card or AUM ID card on the poper 5 Toke o picture or scan, and uplood Important note: if handwritten document is submitted without the integrity stotement including ID (Civil ID or AUM ID), then the related handwritten question(s) will not be groded.

Important instruction: This question uses the last three-digit value (L3D) of individual student matrix number. For example, if the matrix number is CD180264 then the L3D value is 264 (since the last three digits is 264). Some data require multiplication of the L3D value, for examAdditional instruction: These questions use the last three-digit value (L3D) of individual student matrix number. Example, if the matrix number is CD180264 then the L3D value is 264 (since the last three digits is 264). Some data require multiplication of the L3D value, for example 10(L3D) means 10 x L3D.ple 10(L3D) means 10 x L3D.   subject name is

Kindly answer all.  Please skip if you're not interested to answer them. Thank you!

You are a biomedical engineer working for a small orthopaedic firm that fabricates rectangular shaped fracture fixation plates from titanium alloy (model = "Ti Fix-It") materials. A recent clinical report documents some problems with the plates implanted into fractured limbs. Specifically, some plates have become permanently bent while patients are in rehab and doing partial weight bearing activities. Your boss asks you to review the technical report that was generated by the previous test engineer (whose job you now have!) and used to verify the design. The brief report states the following... "Ti Fix-It plates were manufactured from Ti-6Al-4V (grade 5) and machined into solid 150 mm long beams with a 4 mm thick and 15 mm wide cross section. Each Ti Fix-It plate was loaded in equilibrium in a 4-point bending test (set-up configuration is provided in drawing below), with an applied load of 1000N. The maximum stress in this set-up was less than the yield stress for the Ti-6Al-4V…

Solve correctly

Instrumentation & Measurements This homework measures your capability to design/analyze various components/variables of ameasurement system based on what you have studied. Question is Attached in image. Thank you.

Q1. The data shown in the table below is given for a small project: 1. Draw the network diagram (Pert Chart) for this project. 2. Identify all paths in the network. 3. Find the duration of each path. 4. Find the earliest and latest time for activities using forward and backward pass. 5. Determine the critical path. Activity Preceded by Duration (Week) 5 487 218 5 13 14 36 4 ABCDEFGHIJKLM N 0 AAAAB BC BC D,EEF HIG,K KG,L J.N.M 2

A. A student establishes the time constant of a temperature sensor by first holding it immersed in hot water and then suddenly removing it and holding it immersed in cold water. Several other students perform the same test with similar sensors. Overall, their results are inconsistent, with estimated time constants differing by as much as a factor of 1.2. Offer suggestions about why this might happen. Hint: Try this yourself and think about control of test conditions. B. Which would you expect to be better suited to measure a time-dependent temperature, a thermal sensor (e.g., a thermocouple) having a small diameter spherical bead or one having a large diameter spherical bead? Why?

please answer quickly