0.5 gr of a diprotic acid is dissolved in water and titrated with 10 mL 1 M KOH to phenolphthalein end point. What is the molar mass of the acid? ½ H2A (aq) + KOH (aq) --> ½ K2A (aq) + H2O (l) Molar mass of KOH: 56 gr/mol a. 150 gr/mol b. 200 gr/mol c. 100 gr/mol d. 50 gr/mol
Q: 0.5 gr of a diprotic acid is dissolved in water and titrated with 10 ml 1 M KOH to phenolphthalein…
A: Given Mass of diprotic Acid = 0.5 gram Volume of KOH = 10 mL Reaction (1/2 )H2A(aq) +…
Q: After 0.552 g of ascorbic acid (Vitamin C) is dissolved in 20 mL of water, methyl orange indicator…
A: Write the complete balanced chemical equation for this titration reaction.
Q: For CO2 in the atmosphere at 25 degrees C, kH = 3.4 x 10-2 mol L-1 atm-1 and the partial pressure of…
A: Given Data: Henry's constant, kH = 3.4 x 10-2 mol L-1 atm-1 Partial pressure of CO2 = 0.000405 atm =…
Q: What should be the consumption of phenolphthalein and methylorange indicator as a result of the…
A: The question is based on the quantitative estimation of sodium carbonate and sodium bicarbonate…
Q: What mass (in grams) of sodium acetate (CH3COONa) must be added to 100.00 mL of a 0.115 M solution…
A: Mass (in grams) of sodium acetate (CH3COONa) must be added to 100.00 mL of a 0.115 M solution of…
Q: 3) i) A 25.0mL sample of a 30.0% HF solution has a density of 1.101g/mL. The sample is diluted to a…
A: (i) Given, Initial volume of the solution is 25.0 mL. Final volume of the solution is 500 mL.…
Q: An analytical chemist Is titrating 150.5 mL of a 0.1400M solution of aniline (CH,NH,) with a 0.4000M…
A:
Q: 13,8mL of 0,176M H3P04(aq) is titrated with 0,110M NaOH(aq). How much volume of the base is needed…
A: Balanced equation: H3PO4(aq) + 3 NaOH(aq) ---> Na3PO4 + 3 H2O(l) This suggests that 1 mole of…
Q: The chief chemist of Victory Vinegar Works, Ltd., inter- views two chemists for employment. He…
A: The reaction of acid and base in the presence of an indicator in the laboratory is called titration.…
Q: 4. A 0.1036-g sample containing only BaC2 and NaCl is dissolved in 50 mL of distilled water.…
A: Given data Mass of sample mixture [BaCl2 + NaCl] = 0.1036 g Volume of distilled water= 50 mL…
Q: 4. Tris(hydroxymethyl)aminomethane [(HOCH2);CNH2–Tris, or THAM] is a weak base frequently used to…
A: 4. Solution - pH = pH is a scale used to specify the acidity or basicity of an aqueous solution.…
Q: Question 2
A: Commercially available vinegar contains 5%V/V acetic acid. Amount of acetic present in 1L of vinegar…
Q: Calculate the pH of a solution containing a salt AcNa derived from a strong base (NaOH) and a weak…
A:
Q: A diprotic acid, H,A, has K1 - 1.41 x 10 and K2 - 3.09 x 10%. If 50.00 mL. of 0.113 M H2A is placed…
A:
Q: Complete neutralization of 10 mL of hydrochloric acid solution by NaOH 0.1 N in the presence of…
A: TITRATION IS A METHOD USED TO DETERMINE THE CONCENTRATION OF UNKNOWN SOLUTIONS WITH THE HELP OF…
Q: A biochemist needs 750 mL of an acetic acid–sodiumacetate buffer with pH 4.50. Solid sodium…
A: Calculate the value of pKa of CH3COOH: Ka of CH3COOH is 1.80 × 10-5.
Q: What will be the pH of a solution when 200ml of 0.1M HEPES in the basic form and 100mL of 0.1 M…
A: Given: Concentration of Base = 0.1 M volume = 200 mL = 0.2 L concentration of acid = 0.1 M volume =…
Q: The pH of a 0.2L HNO2-NO2 buffer solution was determined to be 6.23. The solution was mixed with…
A: Buffer solution A buffer solution is an aqueous mixture of a weak acid and either its conjugate base…
Q: A 1 litre solution is made by adding 0.6646 moles NaH2PO4 and 0.8868 moles Na2HPO4. What will be the…
A: Here by mixing NaH2PO4 and Na2HPO4 we are making Buffer solution Basically buffer solution is a type…
Q: A 0.125 g sample of a monoprotic acid (HX, one proton/H+) of an unknown molecular weight is…
A: Given, weight of sample of mono protic acid =0.125 g concentration of KOH =0.1003 M end point of…
Q: An analytical chemist is titrating 222.7 mL of 0.8100 M solution of formic acid (H2 CO2 ) with a…
A: The volume of KOH solution required to neutralize the given volume of formic acid is calculated…
Q: Blood is buffered by carbonic acid and the bicarbonate ion. Normal blood plasma is 0.024 M in HCO3…
A: The Henderson-Hasselbalch equation relating the pH of the solution and the acid dissociation…
Q: As a technician in a large pharmaceutical research firm, you need to produce 450. mL of a potassium…
A:
Q: A 1.631 g sample of an unknown triprotic acid (H3A) was dissolved in water and diluted to 250.0 mL…
A:
Q: Calculate the pH of a solution containing a salt AcNa derived from a strong base (NaOH) and a weak…
A: pH is used to determine the concentration of hydronium ion.
Q: A buffered solution contains 0.50 M acetic acid (HC₂ H₂O₂. Ka 1.8 x 105) and 0.50 M sodium acetate…
A: We have to predict the new pH value after adding the base to buffer solution.
Q: Petanoic (or valeric) acid is a weak organic acid with an unpleasant odour. Like other small…
A:
Q: Calculate the pH of a solution containing a salt AcNa derived from a strong base (NaOH) and a weak…
A: Given, Dissociation constant, Ka is 1.21×10-7 The initial concentration of the salt is 1.95 M Kb of…
Q: After 0.552 g of ascorbic acid (Vitamin C) is dissolved in 20 mL of water, methyl orange indicator…
A: Given data,Mass of ascorbic acid=0.552gVolume of water=20mLMolarity of KOH=0.1103MVolume of…
Q: The pH of a buffer solution containing 0.5 mole/litre of CH3COOH and 0.5 mole/litre CH3COONa has…
A:
Q: 0.5 gr of a diprotic acid is dissolved in water and titrated with 10 mL 1 M KOH to phenolphthalein…
A: The mass of diprotic acid is = 0.5 g The molarity of KOH solution = 1M The volume of KOH solution =…
Q: Please complete the calculation of the pH of the equivalence point below. Concentration of NaOH…
A: Aspirin is an organic compound containing carboxylic acid group. The chemical name of aspirin is…
Q: After 0.552 g of ascorbic acid (Vitamin C) is dissolved in 20 mL of water, methyl orange indicator…
A: The quantitative chemical reaction of an acid and a base with each other is known as neutralization…
Q: A sample of oxalic acid (a diprotic acid of the formula H2C2O4) is dissolved in enough water to make…
A: The relation between normality (N) and molarity (M) is shown below where v is the valency of the…
Q: A 50.00-mL sample of white wine required 24.57 mL of 0.03291M NaOH to achieve a phenolphthalein end…
A: Step : 1 Express the acidity of the wine in grams of tartaric acid.
Q: In titrating HC2H3O2 (aq) with 0.1 M NaOH, the equivalence point in pH units will be A. lower…
A: The direct transfer of protons from weak acid to OH- ions occurs, when the weak acid is titrated…
Q: Tris(hydroxymethyl)aminomethane [(HOCH2)3CNH2—Tris, or THAM] is a weak base frequently used to…
A: Given, pH of buffer =7.4 pKa =8.08 pH of any buffer solution can be calculated by…
Q: What mass (in grams) of sodium acetate (CH3COONa) must be added to 100.00 mL of a 0.118 M…
A: Given: Volume of acetic acid = 100.0 mL concentration of acetic acid = 0.118 M pH = 4.70 Ka =…
Q: Calculate the pH of a solution containing a salt AcNa derived from a strong base (NaOH) and a weak…
A: Given, the initial concentration of the salt = 1.75 M The salt dissociates as: AcNa → Ac- + Na+ The…
Q: Basic solutions can be standardized using the dicarboxylic compound, oxalic acid (C2H2O4). An…
A: The neutralization reaction between methanoic acid and potassium hydroxide can be represented as:…
Q: Ethylene diamine tetra acetic acid (EDTA) is an organic acid and its structure is shown below:…
A:
Q: A sample of oxalic acid (a diprotic acid of the formula H2C2O4) is dissolved in enough water to make…
A: Given, Normality=n×molarityConcentration of NaOH,n-factor=1 for sodium hydroxideN1=1×0.750 =0.750…
Q: 1. An acid-base titration is performed in which 26.05 mL of 0.1000M H₂SO4 solution was needed to…
A: The molarity of a solution can be determined by the molarity (M) and volume (V) relation between two…
Q: A 50.00 mL sample of a white dinner wine required 21.48 mL of 0.03776 M NaOH to achieve a faint pink…
A: Given: Wine contains active acidic ingredient H2C4H4O6. Concentration of NaOH = 0.03776 M Volume of…
Q: What volume, mL, of a 0.121M NaOH solution is required
A:
Q: Which solution below would have the greatest buffering capacity? The solution was prepared from a…
A: Given, buffer solutions are: 0.197 M HOC2H4NH2 and 0.197 M HOC2H4NH3Cl, Kb = 3.20e-5 0.0966 M NH2OH…
Q: In some natural systems the pH must be maintained within very narrow limits. e.g. in human blood the…
A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…
0.5 gr of a diprotic acid is dissolved in water and titrated with 10 mL 1 M KOH to phenolphthalein end point. What is the molar mass of the acid?
½ H2A (aq) + KOH (aq) --> ½ K2A (aq) + H2O (l)
Molar mass of KOH: 56 gr/mol
150 gr/mol
200 gr/mol
100 gr/mol
50 gr/mol
Trending now
This is a popular solution!
Step by step
Solved in 2 steps with 2 images
- A 20.00 mL aliquot of lactic acid solution (HCH3H5O3) was titrated with 0.0980 M KOH(aq) using both an indicator and a pH meter. Ka (HCH3H5O3), is 1.38 x10-4. A total of 28.64 mL of 0.0980 M KOH(aq) was required to reach the equivalence point 1. Calculate the molarity of the lactic acid solution. 2. Calculate the pH of the lactic acid solution 3. Calculate the pH and [CH3H5O3-] at the half-equivalence point. 4. Calculate the pH at the equivalence point of the titration. 5. Suggest an appropriate indicator for titration. 6. Calculate the pH of the solution after 10.00 mL of 0.0980 M NaOH(aq) was addedApproximately 6 mL of conc. perchloric acid ( 72% ) was transferred to a bottle and diluted with about 1 liter of water. A sample containing 251.5 mg of primary standard Na2B4O7.10H2O (Fwt= 382g/mol) required 27.41 mL of the HClO4 solution to reach the methyl red end point. What is the molar concentration of the HClO4 solution? Na2B4O7.10H2O + HClO4 ------------> NaClO4 H2B4O7.10H2OWhat is the mass of aectylsaliyclic acid (HC9H7O4, MW = 180.154 g/mol) from an aspirin tablets by titrating with NaOH. One tablet is dissolved in 25 mL of 50% ethanol solution. The resulting solution needed 13.41 mL of 0.2069 standardized NaOH titrant in order to achieve the phenolphthalein endpoint. What is the mg of aectylsaliyclic acid in the asiprin tablet?
- 50 mL sample solution containing Na2CO3 and NaOH is titrated with 0.2 M HCl solution. In the presence of phenolphthalein indicator, the acid consumption is 15 mL. Then, the titration is continued by adding bromocresol green indicator, and in the presence of this indicator, the acid consumption is 10 mL. Accordingly, which of the following is the amount of Na2CO3 (in grams) in the sample? (NaOH: 40 g / mol; NazCO3: 106 g / mol)Normality is same as Molarity for sodium hydroxide and normal = molar (for NaOH) Normality of sodium hydroxide = 0.10395N (normal) or Molarity of NaOH = 0.10395M (molar) Volume of NaOH consumed during the titration = 21.87 mL Mol wt of Naproxen = 230.26 g/mol Weight of Naproxen ds (i.e., sample) = 0.534g Calculate the % Purity (dried-basis) of Naproxen ds, given that the LOD results for Naproxen = 1.0% a 97.0 b 98.0 c 98.5 d 99.0 e 99.5 f none of the other answers.A mixture contains Na2CO3, NaOH and inert matter. A sample weighing 28.85 ml of 0.5000N HCl to reach the endpoint and an additional 23.85 ml to reach the methyl orange end point. What are the percentages Na2CO3 and NaOH
- 1ml of 1mg/ml of diluted aspirin powder solution is titrated by 0.005M NaOH. Before titration, 5 ml ethanol, 14 ml CO2 free water, and 4 drops bromothymol blue indicator is added into diluted aspirin powder solution. Mass of 0.005M NaOH used is obtained by weight titration = 1.1384g . [Molar mass of aspirin =180.15]; for solution, 1g=1mL at 25 degree Celcius. Calculate the purity of the powder.The protein content of wheat flour can be determined reasonably accurately by multiplying the percentage of nitrogen present by 5.7. A 2.06-g sample of flour was taken through a Kjeldahl procedure and the ammonia produced was distilled into a boric acid solution. If this solution required 34.70 mL of 0.174 N HCl for titration to the methyl red end point, what is the a) % Nitrogen and b) % protein in the flour? (Use 1:1 stoich ratio between N and HCl)Limestone consists mainly of the mineral calcite, CaCO3. The carbonate content of a 0.5972 g sample of powdered limestone was measured by suspending the powder in water, adding 25.00 mL of 0.508 molar hydrochloric acid, and heating to dissolve the solid and dispel carbon dioxide gas. The excess acid required 36.29 mL of 0.1064 molar sodium hydroxide for complete titration to a phenolphthalein end point. What is the weight percent of calcite in the limestone?
- Consider the titration of the weak acid, benzoic acid, HC7H5O2. Its acid dissociation reaction is: HC7H5O2 (aq) + H2O (l) ↔ C7H5O2- (aq) + H3O+ (aq) A 25.00 mL sample of a solution of benzoic acid, concentration unknown, is titrated with 0.0500M NaOH solution. A plot of the titration is shown below. 1. what is the pKa (approximately) of benzoic acid? Its Ka? 2. on the plot, indicate the buffering region of the titration 3. From the pH at the equivalence point, estimate the pKb of benzoate ion (conjugate base to benzoic acid)______________[Remember, at the equivalence point, C7H5O2- (aq) + H2O (l) ↔ HC7H5O2 (aq) + OH- (aq) ]A metal M forms a water-soluble hydroxide with a chemical formula of MOH. To determine whatM is, a student prepared 250.0 cm3 of MOH standard solution by dissolving 1.17 g of MOH in distilled water. Then the student titrated 25.0 cm3of the solution with 0.055 M H2SO4(aq) usingphenolphthalein as indicator. The titration was repeated several times and the mean titre was 18.85cm3.(a) Describe how the 250.0 cm3 of MOH standard solution was prepared. (b) (i) Calculate the molar mass of MOH. (ii) Determine what M is. (Relative atomic masses: H = 1.0, O = 16.0) THANKYOU!!!If 1.000 ml. of a solution of KMn04 is equiva- lent to 0.1000 millimole of NaCHO2 (sodium formate) in the fol- lowing titration: 3CHO2- + 2MnO- + H2O -> 3CO2 + 2MnO2 + 5OH-, what is the value of the KMnO4 in terms of grams of CaO in the volumetric method for calcium in which that element is precipitated as CaC2 4 .H2O and the precipitate is filtered, dis- solved in dilute H2S04 , and the oxalate titrated with permanganate?