A hollow shaft with external and internal diameters 100 mm and 75 mm respectively transmits 500 kW at 1 500 r/min. If the measured angle of twist in a length of 3,5 m is 1,17°, calculate the shear strain at the inner and outer radii and the modulus of rigidity of the shaft material.

A hollow shaft with external and internal diameters 100 mm and 75 mm respectively transmits 500 kW at 1 500 r/min. If the measured angle of twist in a length of 3,5 m is 1,17°, calculate the shear strain at the inner and outer radii and the modulus of rigidity of the shaft material.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.2.4P: A circular steel tube of length L = 1.0 m is loaded in torsion by torques T (see figure). (a) If the...

See similar textbooks

Related questions

Q: 3.13 The torques T and 2T are carried by a shaft consisting of steel and aluminum segments. If the…

A: Given:ζs=14,000 psiζa=7,500 psiθmax=8Gs=12*106 psiGa=4*106 psi

Q: A solid circular shaft transmits 75 kW power at 200 rpm. Calculate the diameter of the shaft and the…

A: Given: Power transmitted by the shaft P=75kWSpeed of the shaft N=200rpmModulus of rigidity…

Q: shaft of 53 mm diameter is subjected to a bending moment of 1477158 N-mm and a torque T N-mm. If the…

Q: A 7.50 cm high annular copper cylinder with an inner radius of 2.00 cm and outer radius cm of 3.75…

A: Given data: L=7.5 cm=75 mm Inner Radius ri=2 cm=20 mm Outer Radius ro=3.75 cm=37.5 mm Tangential…

Q: A solid circular shaft transmits 75 kW power at 200 rpm. Calculate the diameter of the shaft and the…

Q: A solid shaft 100 mm in diameter is subjected simultaneously to an axial compressive force of 600 kN…

Q: 4 kN m 1.5 kN m Aluminum Steel Bronze B 100 mm 75 mm 3m 2 m 1.5 m- C FIG. P3.12 FIG. P3.11 3.12 The…

A: For solution refer below images.

Q: A certain circular shaft is subjected to a maximum equivalent bending moment of 36,000 in-lb and a…

Q: Find the required diameter d0 for a solid circle shaft. b) Find the required outer diameter d2 for a…

A: Given: T =1200 NM G=78 GPa Allowable shear stress =40 MPa Allowable rate of twist 0.78/m TO…

Q: A solid shaft of 150 mm diameter is used to transmit torque. Find the maximum torque transmitted by…

A: Given, Diameter of shaft = d = 150 mm Maximum shear stress = τ = 45 N/mm2 Polar moment of…

Q: A hollow shaft for marine applications has outer and inner diameters of 400 mm and 200 mm…

Q: A solid shaft in a rolling mill transmits 30 hp at 100 rpm. Find the diameter in mm of the shaft so…

Q: : Q2 /A hollow steel shaft transmits 200 kw of power at 150 rpm .The total angle of twist in length…

Q: (a) The tubular rotor shaft of a wind turbine shown in Figure 3(a) is of 50 mm and 40 mm outer and…

A: Given data Outer Diameter of Tubular shaft = Do = 50 mm = 0.05 mInner Diameter of Tubular Shaft = Di…

Q: Lets consider a solid circuar shalt subjected to the torque loads as shown. Determine the minimum…

Q: .A hollow steel shaft transmits 600 kW at 500 r.p.m. The maximum shear stress is 62.4 MPa. Find the…

A: We are authorized to answer one question at a time since you have not mentioned which question you…

Q: Lets consider a solid circular shaft having a diameter D = 40 mm subjected to a triangular…

A: Given: The diameter of solid circular shaft, D = 40 mm The torque acting on shaft, t = 100 N.m/m The…

Q: Problem 3.15. A hollow aluminium tube of rectangular cross- section as shown in Fig. 3.27 is…

A: We know that a hollow aluminum tube with a rectangular cross section is subjected to a torque of…

Q: Determine the minimum diameter that can be used for a solid circular steel shaft which is limited…

Q: A mild steel shaft of 50 mm diameter is subjected to a bending moment of 2000 N-m and a torque T. If…

Q: When subject to an applied torque,a circular shaft of length 600mm twists through an angle of 2°,if…

Q: Q6. A hollow circular shaft has an external diameter of 120 mm and the internal diameter is…

A: The inside diagram can be determined as shown below.

Q: A solid shaft 125 mm in diameter transmits 120 KW at 160 rpm. Taking C = 8 x 10 N/mm² and length of…

A: Given data as per question shaft dimeter =125 mmPower transmitted =120 kwSpeed=160 rpmC = 8×10…

Q: Find the maximum stress developed in a stepped shaft when it is subjected to a: i) Torque of “T” Nm.…

Q: 1.5 kN m 4 kN m Steel Aluminum Bronze 100 mm 75 mm 3 m 2 m -1.5 m- C FIG. P3.12 FIG. P3.11 3.12 The…

A: Answer: (a) Maximum shear stress in each material : ◆ Aluminum : 28.0 MPa. ◆ Steel and Bronze :…

Q: find the maximum shear stress induced in a solid circular shaft of diameter 150 mm when the shaft…

Q: 2- Compare the weight of equal lengths of hollow and solid shafts to transmit a torque T for the…

Q: Find the diameter of the shaft (based on torsional stiffness) for which the angle of twist is not to…

Q: Q2 /A hollow steel shaft transmits 200 kw of power at 150 rpm .The total angle of twist in length of…

Q: A 100 mm diameter, 10 m long shaft is used to transmit power at 150 rpm. If angle of twist produced…

Q: mild steel shaft of 50 mm diameter is subjected to a bending moment of 2000 N-m and a torque T. If…

Q: A hollow shaft for marine applications has outer and inner diameters of 400 mm and 200 mm…

Q: A shaft has an external diameter (ED) of 350 mm and an internal diameter of 150 mm.…

A: Given that, External diameter of shaft, D=350 mm,Internal diamter of shaft, d=150 mm,Length of…

Q: A compound bar consists of a steel and bronze segment (Gs t= 80 GPa and Gbr = 40 GPa), The limiting…

Q: A shaft is required to transmit 1 MW power at 240 r.p.m. The shaft must not twist more than 1 degree…

A: Find the diameter of shaft and shear stress in the shaft.

Q: A solid shaft 125 mm in diameter transmits 120 KW at 160 rpm. Taking C = 8 x 104 N/mm2 and length…

A: Write the expression to determine the powerP transmitted by a shaft. P=2πNT60 Here, speed of the…

Q: • For the solid shaft shown in the figure, determine the maximum shearing stress. And the twisting…

Q: A solid shaft has to transmit 120 kW of power at 160 rpm. If the shear stress is not to exceed 60…

Q: 4) Shafts with lengths 5m and4 m are connected by gears. The diameter and shear modulus for both…

A: Given, Shaft lengths , 4m and 5m. Diameter of the shafts , d= 10cm Shear modulus of the shaft ,…

Q: Maximum shear stress developed on the surface of a solid circular shaft under pure torsion is 235…

Q: Q3.An electric motor is connected to a turbine with the help of a hollow shaft. The hollow shaft has…

Q: 4. A solid shaft 125 mm in diameter transmits 120 KW at 160 rpm. Taking C = 8 x 10 N/mm² and length…

A: P=120 kWRPM, N=160C=G=8×104 N/mm2D=125 mmlength, L=7.5 m

Q: Determine the diameter of a solid steel shaft which will transmit 112.5 kW at 200 rpm. Also…

A: Given data, P= 112.5 kW =112500 W N= 200 rpm. θ=1.5° =0.0261799 rad. τ=55 N/mm² =55000000 N/m²…

Q: A steel shaft with a diameter 45 mm and length 1.30 m transmits 55.50 kW from an electric motor to a…

A: Given data Diameter of shaft = d= 45 mm = 0.045 mLength of shaft =l = 1.30 mPower Delivered =P =…

Q: A stepped shaft ABCD consisting of solid circular segments is subjected to three torques, as shown…

A: The individual angle of twist of the sections needs to be calculated to get the resultant at D. Also…

Q: A circular shaft measuring 3 meters in length with an inner and outer radius of 30 mm and 60 mm…

A: Given data: Length of shaft, L =3 m Inner radius, r1=30 mm = 0.03 m Inner Diameter = 0.06 m Outer…

Q: A 1.50-in.-diameter solid shaft is subjected to an axial force of P = 1700 lb, a horizontal shear…

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A propeller shaft for a small yacht is made of a solid steel bar 104 mm in diameter. The allowable stress in shear is 48 MPa, and the allowable rate of twist is 2.0° in 3.5 meters. (a) Assuming that the shear modulus of elasticity is G = 80 GPa, determine the maximum torque that can be applied to the shaft. (b) Repeat part (a) if the shaft is now hollow with an inner diameter of 5d18. Compare values to corresponding values from part (a).
A tubular shaft being designed for use on a construction site must transmit 120 kW at 1,75 Hz, The inside diameter of the shaft is to be one-half of the outside diameter. If the allowable shear stress in the shaft is 45 MPa, what is the minimum required outside diameter d?
The stepped shaft shown in the figure is required to transmit 600 kW of power at 400 rpm. The shaft has a full quarter-circular fillet, and the smaller diameter D1= 100 mm. If the allowable shear stress at the stress concentration is 100 MPa, at what diameter will this stress be reached? Is this diameter an upper or a lower limit on the value of D2?
A thin-walled aluminum tube of rectangular cross section (sec fig me) has a centerline dimensions b = 6.0 in. and b = 4.0 in. The wall thickness t is constant and equal to 0.25 in. Determine the shear stress in the tube due to a torque T = 15 kip-in. Determine the angle of twist (in degrees) if the length L of the tube is 50 in. and the shear modulus G is 4.0 x 106 psi.
A hollow steel shaft used in a construction auger has an outer diameter d2= 6.0 in. and inner diameter d1= 4.5 in. (see figure). The steel has a shear modulus of elasticity G = 11.0 × 106 psi. For an applied torque of 150 kip-in., determine the following quantities: shear stress at the outer surface of the shaft, shear stress at the inner surface, and rate of twist (degrees per unit of length). Also, draw a diagram showing how the shear stresses vary in magnitude along a radial line in the cross section.
A stepped shaft ACB having solid circular cross sections with two different diameters is held against rotation at the ends (sec figure). If the allowable shear stress in the shaft is 6000 psi, what is the maximum torque (T0) that may be applied at section C? Find (T0)max if the maximum angle of twist is limited to 0.55º. Let G = 10,600 ksi.
A stepped shaft ABC consisting of two solid, circular segments is subjected to uniformly distributed torque t1acting aver segment 1 and concentrated torque t2applied at C, as shown in the figure. Segment 1 of the shaft has a diameter of d1= 57 mm and length of L1= 0.75 m; segment 2 has a diameter d2— 44 mm and length L2= 0.5 m. Torque intensity /,"= 3100 N . m/m and T2= 1100 N. m. (a) Find reaction torque TAat support A. (b) Find the internal torque T(x) at two locations: .x = L1/2 and at .x = L1+ L2/2. Show these internal torques on properly drawn free-body diagrams.
What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm, inside diameter 40 mm, and shear modulus of elasticity 80 GPa) turning at 600 rpm if the allowable shear stress is 100 MPa and the allowable rate of twist is 3.0°/m?
A long, thin-walled tapered tube AB with a circular cross section (see figure) is subjected to a torque T. The tube has length L and constant wall thickness t. The diameter to the median lines of the cross sections at the ends A and B are dAand dB, respectively. Derive the following formula for the angle of twist of the tube: Hint: If the angle of taper is small, you may obtain approximate results by applying the formulas for a thin-walled prismatic tube to a differential element of the tapered tube and then integrating along the axis of the tube.
A circular tube AB is fixed at one end and free at the other. The tube is subjected to concentrated torques as shown in the figure. If the outer radius of the tube is 1.5 in, and the thickness is 3/4 in., calculate the strain energy stored in the tube. Let G= 11,800 ksi.
A thin tubular shaft with a circular cross section (see figure) and with inside diameter 100 mm is subjected to a torque of 5000 N · m. If the allowable shear stress is 42 MPa, determine the required wall thickness t by using (a) the approximate theory for a thin-walled tube and (b) the exact torsion theory for a circular bar.
A thin-walled steel tube having an elliptical cross section with constant thickness t (see figure) is subjected to a torque T = 18 kip-in. Determine the shear stress and the rate of twist in degrees per inch) if G = 12 × 106 psi, t = 0.2 in., a = 3 in., and b = 2 in. Note: See Appendix E, Case 16, for the properties of an ellipse.