An underwater sonar that maps the ocean bathymetry is encapsulated in a sphere with a diameter of 85 mm. During operation, the sonar generates heat at a rate of 300W. What is the sonar surface temperature when it’s located in a water column where the temperature is 15o C and the water current is 1 m/sec? The sonar was pulled out of the water without turning it off, thus, it was still working. The air temperature was 15o C and the air speed was 3 m/sec. What was the sonar surface temperature? Was there any reason for concern?

An underwater sonar that maps the ocean bathymetry is encapsulated in a sphere with a diameter of 85 mm. During operation, the sonar generates heat at a rate of 300W. What is the sonar surface temperature when it’s located in a water column where the temperature is 15o C and the water current is 1 m/sec? The sonar was pulled out of the water without turning it off, thus, it was still working. The air temperature was 15o C and the air speed was 3 m/sec. What was the sonar surface temperature? Was there any reason for concern?

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter3: Transient Heat Conduction

Section: Chapter Questions

Problem 3.38P: 3.38 An egg, which for the purposes of this problem is assumed to be a 5-cm-diameter sphere having...

See similar textbooks

Similar questions

A 0.6-cm diameter mild steel rod at 38C is suddenly immersed in a liquid at 93C with hc=110W/m2K. Determine the time required for the rod to warm to 88C.
1.63 Liquid oxygen (LOX) for the space shuttle is stored at 90 K prior to launch in a spherical container 4 m in diameter. To reduce the loss of oxygen, the sphere is insulated with superinsulation developed at the U.S. National Institute of Standards and Technology's Cryogenic Division; the superinsulation has an effective thermal conductivity of 0.00012 W/m K. If the outside temperature is on the average and the LOX has a heat of vaporization of 213 J/g, calculate the thickness of insulation required to keep the LOX evaporation rate below 200 g/h.
1.4 To measure thermal conductivity, two similar 1-cm-thick specimens are placed in the apparatus shown in the accompanying sketch. Electric current is supplied to the guard heater, and a wattmeter shows that the power dissipation is 10 W. Thermocouples attached to the warmer and to the cooler surfaces show temperatures of 322 and 300 K, respectively. Calculate the thermal conductivity of the material at the mean temperature in W/m K. Problem 1.4
3.38 An egg, which for the purposes of this problem is assumed to be a 5-cm-diameter sphere having the thermal properties of water, is initially at a temperature of . It is immersed in boiling water at for 15 min. The heat transfer coefficient from the water to the egg is assumed to be . What is the temperature of the egg center at the end of the cooking period?
I REALLY NEED THE ANSWER UNTIL 5:20PM PLEASE A vertical cylindrical container is being cooled in ambient air at 25°C with no air circulation.If the initial temperature of the container surface is 100°C, compute the surfaceheat transfer coefficient due to natural convection during the initial cooling period. Thediameter of the container is 1 m, and it is 2m high. HELP ME IF MY SOLUTION IS CORRECT, I THINK THIS IS NOT COMPLETE YET. KINDLY HELP ME PLEASE
A copper rod of 30 kg initially at the temperature of 300 °C needs to be immersed and fitted tightly into a ABA alloy ring with inner diameter 30.0015 mm found in tank of 100 liters water of 25 °C. (i) Determine the diameter copper when it is 300 °C. (ii) In your opinion, does the copper rod will still fit tightly into the ABA alloy ring inner diameter 30.0015 in the ambient air condition of 25 °C. Provide your answer in 4 decimal places. Assume the alloy ABA is very small with negligible effect in heat transfer. [Density for copper = 8890 kg/m3, Specific heat, Ccopper = 385 J/kg.°C;Coefficient of thermal expansion, αCopper = 18.0 × 10-6 (°C)-1]. [Density for ABA alloy = 8500 kg/m3, Specific heat, CABA = 138 J/kg.°C;Coefficient of thermal expansion, αABA = 13.3 × 10-6 (°C)-1]. [Density for water = 1000 kg/m3, Specific heat, Cwater = 4200 J/kg.°C].
1. The boiling temperature of water is 100 °C. If you put boiling water in a mugplaced at the table top, you observed that after some time the water cools down,decreasing the temperature of water in the mug. Why is this so? Explain using theZeroth Law of Thermodynamics. What happens to objects when temperature increases? For instance, a jar cover an be removed by putting the cover in hot water. Why is this so?
Please show all steps not Ai generated they have been wrong and I need to understand whats goin on. A steel sphere (AISI 1010), 100 mm in diameter, is coated with a dielectric material layer of thickness 2 mm and thermal conductivity 0.04 W/m • K. The coated sphere is initially at a uniform temperature of 500°C and is suddenly quenched in a large oil bath for which To = 100°C and h = 3000 W/m • K. Estimate the time required for the coated sphere temperature to reach 150°C. Hint: Neglect the effect of energy storage in the dielectric material, since its thermal capacitance (pcV) is small compared to that of the steel sphere.
A food product wants to be produced in a small round shape (pellet) by freezing it in a water blast freezer freezer. Air freezer operates at a temperature of -35 ° C. The initial product temperature is 25 ° C. The pellet has a diameter of 1.2 cm, and a density of 980 kg / m³. The initial freezing temperature is -2.5 ° C. The latent heat of freezing of the product is 280 kJ / kg. The thermal conductivity of the frozen product is 1.9 W / (m ° C). The convective heat transfer coefficient is 40 W / (m² K). Calculate the freeze time. t f = Answerhour.