Q2/ An orifice meter is used to measure the flow rate of water through the piping system of 20 cm I.D, where the diameter of orifice is d, = 10 cm. The pressure at inlet is 17.658 N/cm gauge and the vacuum pressure of 35 cm Hg at throat. Find the discharge of water. (density 1000 kg/m', velocity 1.6 m/s and viscosity 1.002 kg/m.s)

Q2/ An orifice meter is used to measure the flow rate of water through the piping system of 20 cm I.D, where the diameter of orifice is d, = 10 cm. The pressure at inlet is 17.658 N/cm gauge and the vacuum pressure of 35 cm Hg at throat. Find the discharge of water. (density 1000 kg/m', velocity 1.6 m/s and viscosity 1.002 kg/m.s)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Gasoline specific mass: 0,82 g/cm3Diameter 1 = 150mmDiameter 2 = 100mmCalculate the volumetric flow rate through a pipe, considering the results in:a) Bourdon Tubeb) Differential Manometers
A 300 mm by 150 mm Venturi meter (c = 0.985) carries 0.0566 m /s of water with a differential gage reading of 0.634 m. What is the specific gravity of the gage liquid?
Fundamental of fluid flow: A venturi meter with a throat diameter of 6 cm is fitted in a horizontal pipeline of 12 cm diameter with oil of specific gravity 0.88 flowing from left to the right. The difference in level in the two limbs of a mercury manometer connected to the tapping points read 12 cm and the connecting pipes are filled with the same oil. (a) If two pressure gauges are fitted at tapping points, one at the throat and the other in the inlet. Determine the difference between the 2 gage pressure readings in kPa. (b) Determine the flow in m^3/s neglecting head losses.
Q1 Determine the minimum size of glass tubing that can be used to measure water level, if the capillary rise in the tube is not to exceed 0.3 mm. Take surface tension of water in contact with air as 0.0735 N/m. A U-tube is made up of two capillaries of bores 1.2 m and 2.4 mm respectively. Q2) The tube is held vertical and partially filled liquid of surface tension 0.06 N/m and zero contact angle. If the estimated difference in the level of two menisci is 15 mm, determine the density the liquid. Q10) In measuring the unit energy of a mineral oil (specific gravity = 0.85) by the bubble method, a tube having an internal diameter of 1.5 mm is immersed to depth of 12.5 mm in oil. Air is forced through the tube forming a bubble at the lower end. What magnitude of the unit surface energy will be indicated by a maximum bubble pressure intensity of 150 N/m.
An orifice of 2.58 cm diameter is placed in a pipe of 5.1 cm diameter. The pipe delivers oil of specific gravity of 0.8. if the pressure difference on the two sides of the orifice is measured by a mercury-oil manometer and the differential gauge reads 125 mm of mercury, calculate the Actual and Ideal rate of flow in liter per second if Cd = 0.63
In a venturemeter used for measuring the flow of oil (S = 0.85) through a horizontal pipeline, the pipe diameter is 2.4 times the diameter at the throat. Connections are made from the entrance to the meter and the throat to a vertical U tube containing mercury. If the difference level between the fluids in the U-tube arms is (x +1/S.N ) in cm, where S.N. is student serial number. Neglect friction in the pipe. Find an expression in terms of x for the velocity of the oil in the pipe.
3.2 A venturi meter has an inlet diameter of 65mm and a throat diameter of 26 mm. When measuring the flow of a liquid of density 898 kg/m^3 the reading of a mercury differential pressure gauge was 71 mm. Take the coefficient of the meter as 0.97 and the specific gravity of mercury as 13.6. Estimate the flow through the meter in m^3/h.
(Q26) A horizontal Venturimeter with inlet radius 110 mm and throat radius of 55 mm is used to measure the flow of water. The pressure at inlet is 20 N/cm2 and the vacuum pressure at the throat is 27 cm of mercury. Find the rate of flow. The value of cd may be taken as 0.9
Q1: In a venturemeter used for measuring the flow ofoil (-0.85) through a horizontal pipeline, the pipe diameter is 2.4 times the diameter at the throat. Connections are made from the entrance to the meter and the throat to a vertical L tube containing mercury If the difference level between the fluids in the U - tube arms is (x +) in em, where S.N. is student serial number. Neglect friction in the pipe. Find an expression in terms of x for the velocity of the oil in the pipe.
Air with density of 1.225 kg/m^3 and viscosity of 1.789 x 10^-5 kg/m-s flows in a wind tunnel, the wind tunnel spped is measured with Pitot tube probe. For a certain run, the stagantion pressure is measured to be 472.6 Pa gage and the statric pressure is 15.43 Pa gage. Calculate the wind tunnel speed. Choose the right answer below: a.16.3 m/s b.18. 3 m/s c.17. 3 m/s d.19. 3 m/s
The pressure drop across a filter in a water supply line is measured using a Utube manometer filled with carbon tetrachloride (1.595 specific gravity). If the upstream pressure is 18.6 psig, what is the absolute pressure in the pipe after the filter? (in kPa)
An orifice meter consisting of 10 cm diameter orifice in a 25 cm diameter pipe has Ca=0.65. The pipe delivers oil of specific gravity 0.8. The pressure difference on the two sides of the orifice plate is measured by mercury differential manometer. If the differential gauge is 90cm Hg, find the rate of flow.